What are the explanations for the various buttons on the Peugeot 408?

2 Answers
ValeriaLynn
07/29/25 8:46pm
The Peugeot 408's center console features a minimalist design with a touch of luxury. The trip computer clearly indicates which door is not properly closed. The air conditioning is adjusted via the central control screen, as are the sound effects and audio distribution. The driving mode is switched using the buttons behind the gear lever, while the cigarette lighter, USB, and AUX ports are located below the center console. Here are more details about the Peugeot 408: Body dimensions: The new Peugeot 408 measures 4750mm in length, 1820mm in width, and 1488mm in height, with a wheelbase of 2730mm. Powertrain: The Peugeot 408 is equipped with mainstream engines from Dongfeng Peugeot-Citroën, offering two displacement options: 2.0L and 1.6L. The 2.0L variant is the primary recommended model. Safety: The Peugeot 408 features an innovative 6+X safety system, including the EVA emergency braking assist system, Bosch 8.1 version ABS anti-lock braking system, EBD electronic brake-force distribution, TSC traction control, and ESP electronic stability program.
Was this review help?
5
5
Share
MacAngelina
08/14/25 6:14pm
The button design of the Peugeot 408 is actually quite user-friendly. I've been driving this car for a while now, and there are volume adjustment and call answer buttons on the steering wheel, which are very convenient to operate. The center console buttons include air conditioning temperature control, media playback buttons, and a small navigation button. I remember the first time I used the air conditioning, I pressed the wrong airflow direction button and ended up with a cold face. The door buttons control the window lifts, and there's a door lock button on the driver's side to prevent children from messing with them. The cruise control button saves effort on long trips, but remember to turn it off after parking to avoid accidental use the next time you start the car. Additionally, the light knob is on the left side of the dashboard—just turn it to operate. The wiper and horn buttons are also near the steering wheel. It's important to keep the buttons clean to prevent poor contact. Overall, the layout of these buttons is very reasonable, and you'll get the hang of it after a few days of familiarization.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

How to Bleed Car Brakes?

Bleeding air from car brakes involves the following steps: 1. First, locate the bleeder screw on the brake caliper and remove the dust cap from the bleeder valve. Then, connect a rubber tube between the bleeder valve and a brake fluid container. 2. This step requires two people to cooperate. One person sits inside the car and pumps the brake pedal 4-5 times, then firmly holds the pedal down. Meanwhile, the other person loosens the bleeder screw on the brake caliper, allowing air to escape along with the brake fluid. 3. Repeat the above steps until only brake fluid flows out without any air bubbles, indicating that all air has been purged from the brake lines. 4. Finally, tighten the bleeder screw to complete the brake bleeding process.
18
3
Share

How to Turn Off the Engine with Keyless Ignition?

To turn off the engine with keyless ignition, follow these steps: 1. Press the brake pedal and bring the vehicle to a complete stop. 2. Shift the gear from D (Drive) or R (Reverse) to N (Neutral). 3. Engage the parking brake (for electronic parking brakes, simply pull up the switch). 4. Release the foot brake, but do not turn off the power (this ensures the vehicle is fully stopped by the parking brake and prevents the P (Park) lock from engaging prematurely). 5. Continue pressing the brake pedal and shift the gear from N (Neutral) to P (Park). 6. Release the brake pedal and press the engine start/stop button to turn off the power, completing the engine shutdown. Keyless ignition systems have only one button, which is used for both starting and turning off the engine.
15
5
Share

Why is No Ethanol Added to 95 Octane Gasoline?

Ethanol gasoline costs continue to rise, and gas stations are facing increasing sales pressure, so 95 octane gasoline temporarily does not contain ethanol. Compared with traditional gasoline, the biggest advantage of ethanol gasoline is that it can effectively reduce the emission of pollutants in vehicle exhaust. However, the retail price of ethanol is not much different from that of regular gasoline, but with the recent rise in the price of raw materials such as corn, the cost of ethanol has increased. Precautions for Using Ethanol Gasoline: Ethanol is a hydrophilic liquid and easily soluble in water, unlike gasoline, which can separate from water, with water settling at the bottom of the fuel tank. Therefore, when using ethanol gasoline for the first time, the fuel tank should be checked to see if the water content exceeds the standard and affects the engine's operation. During initial use of ethanol gasoline, carefully observe and adjust the engine for any significant abnormalities; long-term use requires consideration of whether the rubber and organic components in the fuel system are resistant to alcohol corrosion. Advantages and Disadvantages of Ethanol Gasoline: Advantages: Energy-saving and environmentally friendly, with low cost; ethanol gasoline is a mixture of regular gasoline and 10% fuel ethanol. It is a renewable resource processed from certain grains and various plant fibers. Using ethanol gasoline can not only diversify the energy structure and ensure energy security but also replace some petroleum, reducing dependence on foreign oil. Additionally, it has a cleaning effect, removing carbon deposits from the engine. Exhaust emissions are relatively lower, which can to some extent improve air pollution. Disadvantages: Ethanol burns slower than gasoline, which can lead to reduced vehicle power, poor acceleration performance, and increased fuel consumption. Secondly, ethanol is easily soluble in water. When the water content in ethanol gasoline exceeds standard levels, phase separation can easily occur, leading to fuel stratification in vehicles parked for long periods, making them difficult to start. Moreover, due to the high oxygen content in ethanol gasoline, prolonged use can corrode the exhaust pipe.
18
2
Share

What does the TNGA architecture of the Highlander mean?

The TNGA architecture of the Highlander refers to the fact that the all-new generation Highlander is built on Toyota's TNGA platform. Below is relevant information about the Highlander TNGA: 1. The TNGA platform is Toyota's latest vehicle manufacturing platform. 2. As the all-new generation Highlander is built on this new platform, the vehicle's exterior has undergone significant changes, with an overall more sporty design. 3. As a mid-size SUV, the body dimensions of this model are 4950/1925/1720mm in length, width, and height, with a wheelbase of 2790mm. Compared to the previous generation, the length of the new model has increased by 60mm. 4. In terms of the powertrain, the 2020 Highlander will offer consumers a 2.5L hybrid version and a 3.5L V6 fuel version. The fuel version is paired with an 8-speed automatic transmission, while the hybrid version uses an E-CVT transmission.
7
1
Share

When to Start Steering When Reversing Out of a Parking Space?

Here are the methods for steering when reversing out of a parking space: 1. Observe the right rearview mirror as the right rear of the car slowly approaches the right corner of the parking space. When the rear of the car is about 30 cm away from the corner and the right front door handle is still outside (i.e., to the right) of the extension line of the right boundary of the parking space, adjustment is needed. Immediately turn the steering wheel one full turn to the left, then continue reversing. When the right front door handle crosses the extension line of the right boundary of the parking space, turn the steering wheel fully to the right. Once the car enters the parking space and the body is parallel to the boundary line, straighten the steering wheel. 2. If the rearview mirror shows a "left wide, right narrow" position, turn the steering wheel 1/4 turn to the left, then straighten it once the car body is aligned. 3. If the rearview mirror shows a "right wide, left narrow" position, turn the steering wheel 1/4 turn to the right, then straighten it once the car body is aligned.
14
4
Share

Does the Excelle have a rear anti-collision beam?

The Excelle is equipped with a rear anti-collision beam that covers almost the entire rear section. It is made of DP1000 ultra-high-strength steel with a material yield strength of 645MPa and a thickness of 1.2mm, featuring a hat-shaped structure and designed with crush guide grooves. An anti-collision beam is a device used to absorb collision energy and mitigate damage when a vehicle is impacted. It consists of a main beam, energy-absorbing boxes, and mounting plates that connect to the vehicle. Both the main beam and energy-absorbing boxes effectively absorb collision energy during low-speed impacts, minimizing damage to the vehicle's longitudinal beams and thereby providing protection. The role of the Excelle's rear anti-collision beam is to offer protection and reduce body deformation in medium-to-low-speed collisions, provided that the connecting brackets of the beam have sufficient buffering and energy-absorbing capabilities. The rear anti-collision beam absorbs impact forces, ensuring that in minor rear-end collisions, the beam is sacrificed to preserve the integrity of the vehicle's chassis. Without a rear anti-collision beam, when the rear of the vehicle is struck, after the energy-absorbing materials absorb part of the impact energy, the remaining energy would inevitably transfer to the entire rear panel, ultimately causing deformation.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.