What are the evaluation criteria for the reverse parking test in Subject 2?
3 Answers
Subject 2 reverse parking passing criteria: Drive according to the specified route and sequence, ensure the vehicle body does not cross the line, no stopping midway, successfully complete reverse parking, and finish within 4 minutes. Below is an introduction to reverse parking: 1. Introduction: Reverse parking became a mandatory test item for obtaining a small car driver's license after 2013. It assesses the driver's ability to maneuver the vehicle within a designated area. Reverse parking is a key assessment point in the driver's test, which involves correctly reversing the vehicle into a garage from both sides while in motion. 2. Dimensions: The test area is 16m long and 6.83m wide, with the garage being 5.25m long and 2.31m wide. 3. Evaluation: Failure to follow the specified route and sequence results in disqualification. Disqualification also occurs if the vehicle body crosses the line, fails to enter the garage, stops midway, or exceeds the 4-minute time limit for completing the reverse parking.
As a novice who just passed the driving test, I still vividly remember the evaluation criteria for the reverse parking in Subject 2. During the exam, sensors monitor in real-time, and touching any parking line immediately results in failure, which is the most critical mistake. There's also a time limit—usually 30 seconds to complete the entire operation. Exceeding the time leads to point deductions, but touching the line is an instant fail. After entering the parking space, the car must be completely within the designated area; none of the wheels can touch or cross the lines, and significant deviations are also unacceptable. The operation must be smooth—stopping or stalling midway is considered an error. During practice, I often touched the right line because I turned the steering wheel half a beat too late. I recommend simulating actual parking spaces more often to improve spatial awareness and rearview mirror alignment. Developing a feel for the car makes it much easier.
I often observe driving tests, and the core criterion for evaluating reverse parking is ensuring safety and precision. Simply put, the standard is: if the vehicle touches any line or the corner of the parking space at any point during the reversing process, it's an immediate fail. The time limit is usually 20-30 seconds; exceeding it results in point deductions, but touching the lines is more severe. After parking, the vehicle must be centered, not exceeding the front or rear boundaries, and the wheels must not touch the boundary lines. Operational mistakes, such as stopping midway or engine stalling, are directly counted as errors. A common issue is failing to control the speed, leading to positional deviations. During practice, it's essential to memorize reference points and directions—don’t rely solely on rearview mirrors. Maintaining smooth and coherent movements is key.
