What are the evaluation criteria for smooth gear shifting in Subject 3?

What causes the dashboard lights to stay on after locking a classic Focus?

If the dashboard lights remain on for a short period of about 10 to 15 minutes, this is a normal phenomenon. This is because the model is equipped with a power-off delay device, and the dashboard lights will turn off after a certain period of time after the car is locked. Once the dashboard lights go out, the various components of the vehicle's electrical system enter a dormant state, and the power consumption becomes very low. If awakened during the dormant process, the system can quickly respond. The reasons for the dashboard lights staying on are as follows: 1. Power-off delay device: The power-off delay device inside the dashboard or the combination instrument itself may have issues, preventing the vehicle from entering the dormant state. 2. Active components: There may be components in the vehicle that remain active, preventing the system from entering the dormant state. In such cases, the current consumption will be very high. If the lights do not turn off or remain on for an extended period, it is necessary to drive the vehicle to a repair facility. First, check the fault codes in the vehicle's electrical system, and then conduct a leakage test on the vehicle to confirm the cause of the fault.

14

5

Share

What are the detailed interior dimensions of the Classic Transit?

The interior dimensions of the 7-seater high-roof long-wheelbase New Transit are 5782mm in length, 2374mm in width, and 2590mm in height, with a wheelbase of 2933mm. The 9-seater New Transit Business Travel version is a medium-wheelbase medium-roof model, with a body length of 5341mm, width of 2032mm, height of 2407mm, and a wheelbase of 3300mm. More details about the Transit are as follows: 1. Exterior: The Classic Transit features a fully opening tailgate design, which can open at 90 degrees and 180 degrees. The rear also includes a fixed anti-slip foot pedal for easier loading and unloading of goods. Additionally, the right side of the body is equipped with a single sliding door design, making it convenient to open the door and get in or out, or to load and unload goods even in tight spaces. 2. Powertrain: The Classic Transit is powered by a 2.8L inline four-cylinder intercooled turbocharged common rail diesel engine, delivering a maximum power output of 116PS/3600rpm, with a specific power output of 30.7Kw/L. The maximum torque is 285Nm/2100rpm. This powertrain offers strong low-speed, high-torque output performance, maintaining lower engine speeds even under full load to achieve better acceleration performance, thus effectively balancing power and fuel consumption.

5

3

Share

What is the wading depth of the classic Focus?

The maximum wading depth of the classic Focus is 500mm. The wading depth of the classic Focus is determined by the height of the vehicle's chassis, which is the ground clearance listed in the vehicle's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact cars and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the classic Focus is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. Installing a snorkel can also increase the height of the engine's air intake, thereby improving the maximum wading depth. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Follow the path taken by other vehicles and drive slowly at a steady speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, or reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, avoid entering the water and choose an alternative route.

15

0

Share

What is the function of the button on the gear lever of the Classic Sylphy?

Used for gear shifting. The purpose of the gear lock button: To ensure safety and prevent accidental gear engagement, which could lead to unintended forward or backward movement and cause accidents. More information about automatic transmission gear positions is as follows: 1. Gear positions N, D, R: For most automatic transmission models, shifting between N, D, and R can be done without pressing the shift button. However, when shifting from other positions, the shift button must be pressed. When shifting from lower to higher gears, the shift button does not need to be pressed. 2. Gear positions P, N: An automatic transmission vehicle can only be started when the gear is in either P or N, and the brake pedal must also be depressed. To start moving, the gear must be shifted from P to D, and the brake pedal must be pressed during this operation. 3. Coasting in N gear: It is important to avoid coasting in N gear while driving an automatic transmission vehicle. This is because the gears in the automatic transmission require lubrication, and when the gear is in N, the oil pump does not operate, preventing normal lubrication of the gears. This can cause the internal temperature of the transmission to rise rapidly, leading to irreversible damage to the transmission.

5

4

Share

Can the Classic Sylphy Low Version Connect to Bluetooth?

Yes. First, enable the Bluetooth function on both your phone and the car. Set the device to be discoverable to everyone, then search for the car's Bluetooth device on your phone. Once found, select it to connect, enter the password, and the pairing will be completed successfully. More details about the Classic Sylphy are as follows: 1. Interior: The seating space creates a very homely atmosphere, making it very comfortable. The layered dashboard design feels like sitting on a sofa at home with a bookshelf in front, on which there is a large screen—like a big TV, truly homely. The central control screen is vibrant and clear, and the entertainment system is well-equipped. The overall space is quite spacious, with ample horizontal and vertical room. The rear seating area offers excellent legroom and knee space, complemented by wide and comfortable seats that minimize the sensation of bumps. Noise control is excellent, with barely any noticeable noise at 60 km/h. 2. Storage Space: The central control area has been downsized. While it should accommodate many items, it doesn’t. There are only two cup holders in the central control area, positioned quite far back. The front area lacks a compartment for tissues or a box, with only a small space for a phone on the front door.

14

5

Share

Does the Classic Sylphy have drainage holes under the chassis?

No. Here is more information about drainage holes: 1. Below the fuel tank cover: Since the fuel tank's sealing is not as tight as imagined, fuel may spill during the insertion or removal of the fuel nozzle. Therefore, this can also serve as an oil drainage hole. Additionally, the drainage hole here prevents water accumulation, avoiding the fuel tank cover from freezing shut in winter. 2. Trunk drainage hole: Generally located near the spare tire, it is only needed in extreme situations like vehicle submersion. Some manufacturers may seal the trunk drainage hole before delivery, which can be punctured when needed. 3. Air conditioning drainage hole: Usually located below or in front of the passenger seat. Turn on the air conditioning and observe where water drips outside the car to locate the air conditioning drainage hole. If unexplained water accumulation is found on the passenger floor, it may be due to a blocked drainage hole causing backflow, which can be cleared with thin wire.

14

5

Share

What are the evaluation criteria for smooth gear shifting in Subject 3?

What causes the dashboard lights to stay on after locking a classic Focus?

What are the detailed interior dimensions of the Classic Transit?

What is the wading depth of the classic Focus?

What is the function of the button on the gear lever of the Classic Sylphy?

Can the Classic Sylphy Low Version Connect to Bluetooth?

Does the Classic Sylphy have drainage holes under the chassis?

What is the tire model of the imported Volkswagen Touareg?

What type of engine oil is suitable for Jinbei Haishi?

What are the reasons why the trunk of a classic Ford Focus hatchback cannot be opened?

What causes the lack of power during acceleration in a classic Focus?