What are the engine specifications of the Zotye 5008?

1 Answers
JasmineRose
07/29/25 3:25pm
The engine specifications of the Zotye 5008 are: the 1.3-liter naturally aspirated engine has a maximum power of 68.5kw and a maximum torque of 113nm; the 1.5-liter naturally aspirated engine has a maximum power of 78kw and a maximum torque of 134nm. The Zotye 5008 is a compact SUV equipped with two engines, one being a 1.3-liter naturally aspirated engine and the other a 1.5-liter naturally aspirated engine. The 1.3-liter naturally aspirated engine can deliver its maximum power at 6000 rpm and its maximum torque at 4500 rpm. The 1.5-liter naturally aspirated engine can deliver its maximum power at 6000 rpm and its maximum torque at 4500 rpm.
Was this review help?
3
1
Share
More Forum Discussions

What are the causes of P00B7 insufficient coolant flow?

Possible reasons include not performing the temperature control actuator-N493- adaptation after replacing the water pump, air in the radiator coolant system, dirt and excessive impurities in the engine cooling system, incorrect use of sealant during water pump installation, and not using high-quality antifreeze with a low freezing point. The following are details about coolant: 1. Detail one: Coolant consists of water, antifreeze, and additives. Depending on the antifreeze component, it can be categorized into alcohol-based, glycerol-based, ethylene glycol-based, and other types of coolant. 2. Detail two: The full name of coolant should be antifreeze coolant, meaning it has antifreeze functionality. Antifreeze prevents the coolant from freezing and cracking the radiator or damaging the engine cylinder block during cold seasons. Alcohol-based coolant uses ethanol as the antifreeze agent, which is inexpensive, has good fluidity, and is simple to prepare. However, due to its low boiling point and tendency to evaporate, it is gradually being phased out.
8
0
Share

Why Does the Rear Seat Belt Make Noise?

The reason for the noise from the car seat belt buckle is due to friction or contact with the driver's seat. Introduction to Seat Belts: Seat belts are safety components used in equipment, such as aircraft or during high-altitude work and performances, to ensure safety. The main materials are polyester, polypropylene, and nylon. Seat belts are not just webbing; besides webbing, they are assembled with other components. Function of Seat Belts: When a vehicle collides or emergency braking is applied, the pre-tensioning device instantly tightens the slack seat belt, securing the occupant firmly in the seat to prevent secondary collisions. If the tightening force exceeds a certain limit, the force limiter appropriately loosens the seat belt to maintain stable chest force. Therefore, car seat belts serve to restrain displacement and act as a buffer, absorbing impact energy, dissipating inertial forces, and preventing or reducing the severity of injuries to passengers.
9
1
Share

Has the Electronic Driver's License Been Launched in Pingdingshan?

Pingdingshan's electronic driver's license has been available since November 28. Functions of the electronic driver's license: After obtaining the electronic driver's license, it can serve as a supplement to the traditional paper driver's license. It can also be used to handle some simple traffic violation cases and minor traffic accident matters. When encountering routine checks by law enforcement officers during driving, the electronic driver's license can be presented, greatly facilitating people's daily lives. Ways to apply for an electronic driver's license: If the driver's license is within its validity period, the electronic driver's license can be applied for via the 'Traffic Management 12123' app. However, if the driver's license is under suspension, temporarily withheld, overdue for medical examination, overdue for review, or announced as suspended, it cannot be applied for as it is not legally valid for use.
18
2
Share

How much can the throttle be pressed in first gear when going uphill?

When going uphill in first gear, the throttle can be pressed to 2000-2500 RPM, which corresponds to 10-20 km/h. Here are some relevant details: 1. Manual transmission: Typically, it consists of 5 forward gears + 1 reverse gear. Older cars used to have 4+1 gears, while some high-end manual cars now feature 6 forward gears + 1 reverse gear. Generally, more gears allow for more flexible speed control and better utilization of the car's power, leading to improved fuel efficiency. 2. Gear usage: Most manual transmission cars have 5 forward gears, 1 reverse gear, with neutral in the middle. Use 1st gear for starting; 2nd gear for speeds between 20-40 km/h; 3rd gear for 40-60 km/h; 4th gear for 60-75 km/h; and 5th gear for speeds above 75 km/h.
12
1
Share

Can a motorcycle that hasn't been inspected for seven or eight years undergo a retrospective inspection?

Motorcycle that hasn't been inspected for seven or eight years can undergo a retrospective inspection. Motorcycle: A motorcycle is a two or three-wheeled vehicle driven by a gasoline engine and steered by handlebars to control the front wheel. It is lightweight, flexible, and fast. Motorcycles are widely used for patrol, passenger and cargo transportation, and also serve as sports equipment. Broadly speaking, motorcycles can be categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc. Motorcycle Annual Inspection: Fill out the 'Motor Vehicle Inspection Record Form' and 'Motor Vehicle Verification Application Form', then submit them to the inspection station staff and wait in line. The motorcycle inspection mainly includes three items: the braking system, lighting system, and exhaust emissions. After the inspection, take the forms to the business office to update the vehicle license and pay the relevant annual inspection fees.
4
4
Share

What is the structure of a trolley?

Introduction to trolley structure is as follows: The body is made into a box shape: Suitable for carrying lightweight items that are easy to load and unload. The body extends with a bracket: Convenient for placing parts such as rods, shafts, and pipes. The body shape matches the cargo: Such as a gas cylinder trolley. Structural features of the trolley: Detachable, single-layer, double-layer, and three-layer silent trolleys can all be disassembled and packed into cartons for easy long-distance transportation. Installation is done with the provided screws. Types of trolleys: Trolleys for different purposes have different body structures. General four-wheel trolleys mostly have a cargo platform. For example: foldable trolleys, trolleys with wire mesh side panels, three-layer trolleys, step ladders, hand trucks, flatbed trolleys, silent trolleys, etc., all have different functions.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.