What are the engine specifications of the T-Roc?

1 Answers
LaKendra
07/29/25 7:14pm
T-Roc engine specifications: The T-Roc is equipped with two engines, a 1.2T and a 1.4T. The 1.2T version engine has a maximum output power of 85 kW and a maximum torque of 175 Nm; the 1.4T version engine has a maximum output power of 96 kW and a maximum torque of 225 Nm. The T-Roc is FAW-Volkswagen's first SUV, with dimensions of 4318mm in length, 1819mm in width, 1582mm in height, and a wheelbase of 2688mm. The front face of the T-Roc adopts a family-style design, with a horizontally stretched front grille decorated with chrome trim, and the headlights on both sides resemble two eyes. Overall, it has high recognition and strong integrity.
Was this review help?
10
0
Share
More Forum Discussions

What to Do When the Front Shock Absorber of Baojun 730 Has Problems Going Over Bumps?

Solutions for front shock absorber issues in Baojun 730 when going over bumps: Remove the shock absorber and stand it upright, then clamp the lower connecting ring in a bench vise. Pull and press the shock absorber rod forcefully several times. There should be stable resistance during this process, with the resistance when pulling up (rebound) greater than when pressing down. If the resistance is unstable or absent, it may indicate insufficient oil inside the shock absorber or damaged valve components, requiring repair or part replacement. Below are relevant details: 1. Drive the car on rough roads for 10km and then stop. Touch the shock absorber housing by hand. If it is not hot enough, it means there is no resistance inside the shock absorber, and it is not working. At this point, add appropriate lubricating oil and test again. If the housing becomes hot, it indicates insufficient oil inside the shock absorber, and it should be refilled. Otherwise, the shock absorber is faulty. 2. Shock absorbers are wear-prone parts during vehicle use. The performance of the shock absorber directly affects the smoothness of the car's ride and the lifespan of other components. Therefore, it is essential to keep the shock absorber in good working condition to maximize your car's performance.
17
3
Share

Where is the air conditioning filter of Foton Mopack located?

Foton Mopack's air conditioning filter is installed at the air intake in the right rear corner of the engine compartment and can be cleaned or replaced separately. The air conditioning filter can adsorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and long-lasting moisture absorption. Below is some information about the Foton Mopack: 1. The front face design of the Foton Mopack is stable and neat, with a slightly wedge-shaped compact design that is quite appealing. The brightness of the front crystal diamond headlights has been increased threefold, meeting lighting needs under various road conditions and weather. 2. In terms of interior, the Mopack features newly designed seats and new material floor carpets across the entire lineup. These changes not only bring a fresh look to the vehicle but also enhance its overall grade. 3. The Foton Mopack has optimized seat dimensions based on passenger space, improving the ergonomics of the seats and thereby enhancing seating comfort. For the flooring, the fit between the carpet and the vehicle floor has been improved. Additionally, the carpets used are made of highly environmentally friendly materials, reducing odors inside the vehicle.
5
4
Share

What to Do If the First Maintenance Reaches 6000 Kilometers?

The service center will stamp the maintenance seal on it as proof of normal maintenance to avoid disputes over warranty coverage. Making an appointment for service is a good habit, as it can at least save you from waiting in line.
11
1
Share

What to do after completing the full-score education for driver's license?

After completing the full-score education, you need to take the exam on road traffic safety laws, regulations, and related knowledge. Those who pass the exam will have their demerit points cleared and their driver's license returned; those who fail will continue to participate in study and exams.
13
3
Share

What to Do When the Starter Gets Wet and Stops Responding?

Take it to a repair shop for servicing. Clean the accumulated water inside the engine. Assess the situation to determine the extent of cleaning required. Remove the intake pipe and intake manifold, then use compressed air to dry out the water inside.
1
4
Share

What does it mean when the SUS light on the dashboard is on?

The reason why the SUS yellow light on the car dashboard is on is due to an engine malfunction. This yellow light is the engine malfunction indicator. Reasons for the engine malfunction light to illuminate: 1. Poor combustion state: A poor combustion state in the engine is the main reason for the engine malfunction light to come on. In automotive design, to ensure the engine is in good working condition and to guarantee its normal operational lifespan, oxygen sensors are installed to monitor the engine's combustion state. If the combustion state is poor, it not only pollutes the environment but also leads to fuel wastage and excessive engine wear. 2. Poor fuel quality: The engine has specific requirements for fuel quality, especially as regulations increasingly demand higher performance from engines, thus raising the standards for fuel quality. In reality, some gas stations may not fully comply with these standards to provide fuel that meets the requirements of high-performance engines, leading to frequent occurrences of the engine malfunction light illuminating. 3. Dirty engine cylinder interior and carbon buildup: Over time, the engine interior inevitably accumulates carbon deposits. These deposits can alter the engine's design parameters and, due to their unstable nature and heat retention, can cause irregular ignition, leading to engine knocking. In such cases, the engine malfunction light will also come on.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.