What are the engine specifications of the Lincoln MKC?

1 Answers
DeColton
07/29/25 11:58pm
The engine specifications of the Lincoln MKC are: it is equipped with a 2.0L turbocharged engine, with a maximum horsepower of 203 PS, a maximum power of 149 kW, a maximum torque of 381 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed of 2500 rpm. It is paired with a 6-speed automatic transmission. The Lincoln MKC is a compact SUV with body dimensions of 4552 mm in length, 1864 mm in width, and 1657 mm in height, a wheelbase of 2690 mm, and a fuel tank capacity of 59.4 L. It features a front MacPherson strut independent suspension and a rear multi-link independent suspension, with a front-wheel drive system.
Was this review help?
18
0
Share
More Forum Discussions

What Types of Vehicles Can a B1 Driver's License Drive?

B1 license holders can drive medium-sized passenger vehicles, including urban buses with a capacity of 10 to 19 passengers, vehicles that can be driven with a C-class license, and vehicles permitted by an M license. The B1 license does not include B2, meaning it does not permit driving trucks. Medium-sized passenger vehicles are defined as those with a length of less than 6 meters and a seating capacity of more than 9 but fewer than 20 people. The following circumstances disqualify an applicant from applying for a B1 license upgrade: 1. Driving under the influence of alcohol; 2. Having a record of driving under the influence of alcohol during the current scoring cycle and the three consecutive scoring cycles prior to the application; 3. Driving at speeds exceeding 50% of the speed limit during the current scoring cycle and the three consecutive scoring cycles prior to the application, without having the driver's license revoked.
19
4
Share

How Many Liters of Brake Fluid Are Needed for Replacement?

Generally, only 1L of brake fluid is required for replacement. Brake fluid typically needs to be replaced every 40,000 kilometers or every 2 years. When replacing, it is essential to use brake fluid of the same grade as the original. The brake fluid grade is indicated on the brake fluid cap. For example, if the original vehicle uses DOT4, only DOT4 should be used for replacement. Below are some braking techniques: 1. Emergency braking: Some vehicles are not equipped with ABS, so it is not recommended to apply full braking force at once. Instead, brake in two separate steps to prevent wheel lock-up, which could lead to skidding and loss of steering control. 2. Braking in rainy conditions: When driving on wet roads, avoid slamming the brake pedal or turning the steering wheel abruptly. After passing through water, it is advisable to gently press the brake pedal twice to use inertia and friction to remove water from the brake discs, preventing brake failure during sudden stops.
8
4
Share

What license plate is used for hybrid vehicles?

Hybrid vehicles are issued green license plates. Hybrid vehicles are categorized into plug-in hybrids, gasoline-electric hybrids, and range-extended hybrids. Among these, only plug-in hybrids are permitted to apply for green license plates, while other hybrid vehicles are excluded and cannot obtain green plates; instead, they receive blue license plates, which are the same as those used for conventional fuel-powered vehicles. Relevant information about license plates is as follows: 1. Introduction: License plates, commonly referred to as vehicle plates, are panels affixed to the front and rear of a vehicle, displaying the vehicle's registration number, registration region, or other pertinent details. 2. Function: License plates serve to number and register vehicles, with the primary purpose of identifying the vehicle's region of registration and enabling the tracing of the vehicle's owner and registration details through the plate number.
1
4
Share

Is the car body parallel with the front wider and the rear narrower?

The car body is parallel with the front wider and the rear narrower. Through the rearview mirror, you can see from the front to the rear of the car with a difference in distance. If what you see is parallel, in reality, it is not parallel. If you see parallel from the left rearview mirror, the front of the car is actually turning to the left. In this case, when viewed from the right rearview mirror, it originally leans to the left. More relevant information is as follows: 1. Note: When reversing, if the car body in the rearview mirror appears wider in the front and narrower in the rear relative to the roadside line and does not turn, it means the car is moving straight backward. If you see the car body parallel to the roadside line or narrower in the front and wider in the rear in the left rearview mirror, the front of the car is leaning to the right, and you should slightly turn the steering wheel to the left to adjust the vehicle. 2. Training method for reversing in a straight road: Drive forward, stop when the car is parallel to the roadside line, observe the image in the rearview mirror, and remember to look at the rearview mirror when reversing. You can also stick your head out of the window, stop when you see the left side of the car parallel to the left marking line, observe the image in the rearview mirror, and use the same method for the right side. Once you remember this, you won’t deviate when reversing by looking at the rearview mirror.
5
5
Share

How Far Can a Car Go After the Fuel Light Comes On?

When the fuel light comes on, a car can typically travel 30-100 kilometers. Under normal circumstances, when the fuel light illuminates, most vehicles can still cover a distance of 30 to 100 kilometers. However, in heavy traffic conditions, this range may be reduced by about one-third. For particularly fuel-efficient cars, the distance might be even greater. It is generally safe to drive within 20 kilometers after the fuel light comes on, but beyond that, caution is advised, and it's best to prepare gasoline in advance. 1. Information about the fuel light: When the fuel gauge's yellow light comes on, a car can usually travel about 50 kilometers under normal road conditions. This is a standard set during vehicle design, ensuring that regardless of the vehicle's fuel consumption rate or the size of the fuel tank, the 50-kilometer range is maintained. This is a common practice, and it's advisable not to wait until the fuel light comes on before refueling. 2. Purpose of the fuel gauge: As is well known, the fuel gauge consists of a fuel level sensor and an indicator. Its primary function is to inform the driver of the remaining fuel. When the fuel light turns on, it indicates that the vehicle is low on fuel and requires prompt refueling.
5
1
Share

Where is the cabin air filter located in a Nissan Sunny?

The cabin air filter in a Nissan Sunny is located behind the glove compartment on the passenger side. Here are additional details about the Nissan Sunny: 1. Exterior: The 2016 Nissan Sunny measures 4456mm in length, 1696mm in width, and 1514mm in height, with a wheelbase of 2600mm. It features a trapezoidal front grille design with chrome trim. The side profile displays rounded lines with the highest point at the vehicle's midsection, giving it a somewhat retro appearance. 2. Interior: The cabin adopts a dual-tone design combining light and dark gray shades, complemented by maple wood trim for an overall elegant aesthetic. 3. Powertrain: The 2016 Sunny exclusively comes with a 1.5L engine producing 82kW maximum power and 139Nm peak torque. Paired with a CVT transmission, it achieves a top speed of 175km/h with a 0-100km/h acceleration time of 12.8 seconds.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.