What are the engine specifications of the Honda Civic?

1 Answers
StLila
07/29/25 6:15pm
Honda Civic's engine specifications are: equipped with a 1.0T inline 3-cylinder turbocharged engine, matched with a CVT continuously variable transmission, with a maximum power of 92KW, maximum horsepower of 125PS, maximum torque of 173NM, maximum power speed of 5500rpm, maximum torque speed range of 2000 to 4500rpm, and all fuel supply is direct injection. The Honda Civic is a compact car with a body length, width, and height of 4649mm, 1800mm, and 1416mm respectively, and a wheelbase of 2700mm. In terms of appearance, the Honda Civic has a stylish and elegant design with smooth body lines.
Was this review help?
1
2
Share
More Forum Discussions

How many liters of engine oil does the Mercedes-Benz GLA200 require?

The Mercedes-Benz GLA200 requires approximately 6.5 liters of engine oil. Here is relevant information: 1. Engine Oil Classification: Currently, engine oils on the market can be broadly categorized into mineral oils and synthetic oils based on their base oil (vegetable oils are not considered due to their scarcity). Synthetic oils are further divided into: full synthetic and semi-synthetic. 2. Advantages: Synthetic oils have a wider temperature range, longer service life, and higher cost. For the same oil film requirements, synthetic oils can achieve the desired performance with lower viscosity, whereas mineral oils require higher viscosity compared to synthetic oils to meet the same requirements.
9
3
Share

What are the normal high and low pressures for car air conditioning?

Car air conditioning normal high pressure should be 1.3-1.7MPa (13-17kg/cm2 or 190-250Lbf/in2); normal low pressure should be between 0.15-0.25MPa (1.5-2.5kg/cm2 or 20-35Lbf/in2). The following is the extended content: 1. The car air conditioning system is a device that cools, heats, ventilates and purifies the air in the compartment. It can provide a comfortable riding environment for passengers, reduce driver fatigue and improve driving safety. Air conditioning equipment has become one of the indicators to measure whether a car is fully functional. 2. In summer, when the temperature difference between the inside and outside of the car is large, it is not advisable to turn the air conditioning temperature too low immediately after entering the car. You can first use the high air volume natural wind to disperse the heat in the compartment, then do not close all the windows, turn on the air conditioning, and wait for the body to gradually adapt before adjusting the air conditioning to the desired temperature and closing the windows. In this way, the body will not be uncomfortable due to the sudden drop in external temperature. 3. The temperature of the air conditioning is not the lower the better. The most comfortable temperature for the human body is about 23 degrees Celsius. On sunny summer afternoons, the air conditioning should not be too low, which can not only resist the hot summer sun but also ensure that the ambient temperature of the human body is not too low, thereby avoiding "air conditioning disease", and also responding to the national call for energy saving, emission reduction, low carbon and environmental protection.
13
2
Share

Can Vehicle Annual Inspection Be Handled by an Agent?

Vehicle annual inspection can be handled by an agent. The agent needs to present the owner's authorization letter and the relevant vehicle documents to conduct the annual inspection on behalf of the owner. Before the inspection, all required documents and materials should be prepared, including the ID card, driver's license, vehicle registration certificate, and proof of compulsory traffic insurance. The agent will also need their own ID card. Additional information: Introduction to vehicle annual inspection: Vehicle annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for the vehicle conducted in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle annual inspections help to promptly identify and eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents.
14
2
Share

Which driving school can apply for a C5 driver's license?

You can apply for a C5 driver's license at either the vehicle management office or a driving school. Here is detailed information about the C5 driver's license: 1. Process: First, consult a qualified driving school, then undergo a medical examination at a hospital approved by the provincial health department. 2. Medical examination items: Mainly include vision, upper limbs, and whether there is hypertension. After the medical examination, register at the driving school with the medical examination form, enter the vehicle management department's student list, and study traffic regulations. The first subject test is for training in site driving skills. The second subject test is for training in road driving skills. The third subject test is taken after passing the previous two tests. After passing all three subjects, you can obtain a C5 driver's license.
18
1
Share

What type of engine oil is used in the Haval H6?

Haval H6's factory-recommended engine oil model is CI-4 with a viscosity of 15W-40. Additional information: I. Classification of engine oil: 1. Engine oils are categorized into winter-use and summer-use oils based on viscosity. Winter-use oils include SAE0W, SAE5W, SAE10W, SAE15W, SAE20W, SAE25W, where 'W' stands for winter. The smaller the number before 'W', the lower the low-temperature viscosity, making it suitable for colder environments. Summer-use oils include SAE20, SAE30, SAE40, SAE50, where larger numbers indicate higher viscosity, suitable for higher ambient temperatures. 2. The API classification method divides engine oils into two series: S and C. Gasoline engine oils belong to the S series, currently including SG, SJ, SL, SM, SN grades. Higher grades offer better performance and are more suitable for newer technology engines. Diesel engine oils belong to the C series, currently including CE, CF, CH, CI grades in China. Higher grades provide better lubrication and cleaning effects. II. Functions of engine oil: 1. Lubrication: Engine oil forms a continuous oil film between all friction surfaces of moving parts to reduce friction. 2. Cooling: During circulation, engine oil flows over the working surfaces of parts, lowering their temperature. 3. Cleaning: The flow of lubricating oil washes away dirt generated on the working surfaces of parts. 4. Sealing and leakage prevention: Engine oil can form a seal between piston rings and pistons, reducing gas leakage and preventing external contaminants from entering.
15
1
Share

How to Reduce Wind Resistance in Cars?

Methods to reduce wind resistance in cars include: 1. Flat underbody: A flat underbody not only reduces the resistance when air flows through but also minimizes the lift caused by turbulence. The ideal underbody consists of a complete lightweight underbody armor, but this is generally not cost-effective. Electric vehicles do not have an exhaust system, so their underbody design is naturally flatter. With reasonable component layout, they usually achieve better aerodynamic performance. 2. Utilize ground effect: Ground effect involves using baffles around the car body to divert the airflow that originally passes under the car to both sides of the body while reducing the entry of airflow from both sides into the vehicle's underside. This creates a low-pressure area between the car and the ground, resulting in a pressure difference between the car body and underbody, generating additional downforce. This enhances tire grip, reduces rolling friction, and improves energy efficiency. 3. Various airflow guiding devices: In areas where the car body's angle changes exceed 12 degrees (such as the rear), using spoilers, diffusers, and other guiding devices can improve the car's aerodynamic performance. Their general principle is to guide airflow more smoothly over the car body, preventing turbulence around it. 4. Enclosed wheel hubs: Those who often watch F1 races are certainly familiar with this design, which has existed for a long time but is rarely used in traditional car designs because enclosed wheel hubs significantly affect the cooling performance of the braking system. When a car is in motion, due to the effect of air, aerodynamic forces in three directions—longitudinal, lateral, and vertical—are generated around the car's center of gravity, affecting high-speed driving differently. Among these, the longitudinal aerodynamic force is the largest, accounting for over 80% of the total aerodynamic force. Therefore, the component of the aerodynamic force acting on the car in the direction of travel during straight-line driving is called air resistance.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.