What are the effects of water entering the car's dashboard?

Are Steering Gears Universal?

Steering gears are universal. Introduction to Steering Gears: The steering gear assists the driver in applying force when turning the steering wheel, reducing the effort required during steering. It is mainly divided into rack-and-pinion steering and worm-and-sector steering. Currently, there are roughly three types of power steering systems on the market: electric power steering (EPS), rack-and-pinion hydraulic power steering, and electro-hydraulic power steering. Working Principle: Electric power steering activates the motor below the steering wheel when the driver turns it. The power steering system consists of a mechanical steering system with an additional power assist device. The steering oil pump is installed on the engine and driven by the crankshaft via a belt, outputting hydraulic fluid.

6

1

Share

What causes oil leakage from the installed fuel injector?

The reasons for oil leakage from the fuel injector may include dirty engine oil, excessive engine temperature, damaged gasket, low injection pressure, etc. Dirty engine oil: Unclean engine oil with impurities in the high-pressure oil pipe can cause the needle valve assembly to fail to close tightly, allowing high-pressure combustion gas to backflow and damage the needle valve assembly. Additionally, contaminants on components such as the injector pressure regulating spring and tappet can contribute to this issue. Excessive engine temperature: Poor cooling of the injector due to high engine temperature can lead to seizure of the fuel outlet valve assembly. Other contributing factors include delayed fuel supply timing, excessive scaling or blockage in the cooling water passages, wear on the water pump impeller end face, or prolonged engine overload. Damaged gasket: During fuel injector installation, missing or damaged gaskets can cause air leakage, resulting in localized overheating of the injector and subsequent seizure. Low injection pressure: Insufficient injection pressure can cause high-pressure combustion gas in the combustion chamber to backflow.

10

0

Share

Can I sell a car with only the green book if I'm not present?

Selling a car with only the green book but without the owner present cannot complete the transfer of ownership. Vehicle Registration Certificate: The "Motor Vehicle Registration Certificate" is a necessary proof of property rights for the vehicle, kept by the vehicle owner and not carried with the vehicle. It is required to be presented for any vehicle registration procedures such as transfer or change of ownership, and records the relevant information of the vehicle, equivalent to the vehicle's household registration booklet. Vehicle Transfer: When a vehicle is moved from one city to another, the registration process required to change the jurisdiction of the vehicle management authority is called a transfer. Vehicle transfer requires the replacement of license plates and the vehicle license, and must be processed at two different vehicle management authorities, involving both the transfer-out and transfer-in procedures.

20

1

Share

Will Changing Tires and Rims Affect the Tire Pressure Monitoring System?

Changing tires and rims will not affect the tire pressure monitoring system because the sensors of the tire pressure monitor are placed on the rims. During replacement, you only need to pay attention to the tire pressure monitor sensors and perform a tire pressure reset after the replacement is completed. For a direct tire pressure monitoring system, the pressure sensors should be removed and reinstalled on the new rims when changing the rims. An indirect tire pressure monitoring system can directly replace the rims without being affected. A composite TPMS is similar to a direct tire pressure monitoring system, requiring the removal of corresponding accessories from the rims. The method for resetting the tire pressure is as follows: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the original data, and finally, the fault light on the dashboard will turn off, indicating the tire pressure reset is complete.

15

3

Share

Why does the engine light come on and the car shake when stopped?

Reasons for the engine warning light illuminating and the car shaking: Fuel quality issues: Poor or substandard fuel quality. Some car owners may notice the engine warning light turning on immediately after refueling, usually caused by filling up with low-quality fuel at non-standard gas stations. While this situation does not affect the vehicle's driving performance, it can cause damage to the engine. Carbon buildup in the engine or spark plugs: After prolonged use, the engine accumulates carbon deposits, which can lead to engine damage, starting difficulties, poor acceleration, excessive engine noise, and other issues. The accumulated heat can cause irregular ignition in the engine, resulting in engine knocking. In such cases, the engine warning light will illuminate.

7

3

Share

What Causes Abnormal Noises When Starting a Motorcycle?

Abnormal noises when starting a motorcycle may include air leakage sounds, valve tapping sounds, or piston ring noises. Air Leakage Sound: If the fastening bolts between the cylinder and cylinder head, cylinder and crankcase, or left and right crankcases are loose or the gasket is damaged, a hissing air leakage sound may occur. The sound is difficult to hear clearly during steady operation after starting. During a stationary inspection, obvious oil traces can be found at the leakage point. If the issue is not severe, simply tightening the fastening bolts may suffice. In severe cases, replacing the gasket is necessary. Valve Tapping Sound: If the valve clearance becomes too large due to improper adjustment or part wear, the valve mechanism will produce short, sharp tapping sounds. This tapping does not vary with changes in engine speed. The issue can be resolved by adjusting the valve clearance or replacing worn parts. Piston Ring Noise: If the piston rings are worn, lack sufficient tension, are stuck, or have excessive end gap, side clearance, or back clearance, combustion gases will rapidly leak into the crankcase during engine operation, producing a leakage knocking sound. By placing a screwdriver against the spark plug and listening carefully, distinct popping sounds can be heard.

9

1

Share

What are the effects of water entering the car's dashboard?

Are Steering Gears Universal?

What causes oil leakage from the installed fuel injector?

Can I sell a car with only the green book if I'm not present?

Will Changing Tires and Rims Affect the Tire Pressure Monitoring System?

Why does the engine light come on and the car shake when stopped?

What Causes Abnormal Noises When Starting a Motorcycle?

How Wide is the Single Plank Bridge in the Motorcycle Test?

Why Does a Tire Changer Damage Wheel Rims?

Can I Use Coating Agent on a New Car?

Can Motorcycles Get Wet in the Rain?