What Are the Effects of Replacing the Windshield?

3 Answers
Kenneth
07/29/25 10:28pm
If the windshield is replaced correctly, there will be no adverse effects. However, if the installation is not done properly, causing the adhesive between the windshield and the car body to not fit tightly, it can negatively impact the vehicle. Additional information: 1. Effects of improper windshield installation: At high speeds, wind can enter through the gaps between the windshield and the car body, increasing interior noise. Additionally, when driving on bumpy roads, you may hear rattling or impact sounds from the front of the car. 2. Avoid impacts on the windshield: The windshield is made of laminated glass. In case of a minor impact, only the outer layer may crack or sustain damage, which can often be repaired. However, if the impact is severe, damaging the inner layer or causing long cracks or large areas of breakage, the windshield cannot be repaired and must be replaced promptly.
Was this review help?
13
3
Share
LaAndres
08/15/25 11:18pm
After replacing the windshield, my car feels much safer to drive, mainly because the new glass has explosion-proof functionality. In case of a collision, the fragments won't scatter and cause injuries. The visibility is also exceptionally clear, especially when driving at night, as I no longer have to worry about tiny cracks on the old glass affecting my vision. However, it's crucial to find a professional shop for the replacement. Improper installation can lead to water leaks or inadequate sealing, which could cause rainwater to leak into the car during heavy downpours—a major hassle. I once saw a friend whose car roof leaked after a windshield replacement, damaging the seat electronics, and the repair costs ended up being much higher. That's why I recommend getting genuine factory glass replaced at an authorized service center. It might cost a bit more, but it's far more reliable. Daily maintenance is also important—keep the new glass clean and avoid scratching it with hard objects to prevent marks.
Was this review help?
18
4
Share
Expand All
LondynDella
10/18/25 3:09am
I'm on a tight budget, so I need to calculate the cost of replacing the windshield. Original factory glass is indeed more expensive, while regular repair shops might charge around one to two thousand yuan. However, if you have glass coverage in your car insurance, you can claim the cost and save a lot. The downside is that after replacement, the resale value of the car might drop a bit. Potential buyers may ask if it's been in an accident, and I'd have to explain clearly that it wasn't a major issue to be fair. Also, choosing the right glass material is crucial. Cheap options may seem cost-effective but are prone to aging and bubbling, requiring replacement again in just a few years, which is a waste of money. Additionally, the technician's skill during installation is important—poor workmanship can lead to gaps around the edges, causing wind noise that's especially annoying at high speeds.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

How to Remove a Sedan's Headlight?

After opening the sedan's engine hood, unscrew the dust cover by turning it in the direction of the threads, then press the wire spring clip near the base to remove the headlight. Below is the working principle of headlight height adjustment: 1. Manual Adjustment: Uses a sliding rheostat to control the motor for height adjustment. The driver can adjust the light angle via the lighting knob under the dashboard based on road conditions. 2. Automatic Adjustment: Converts signals from height position sensors into voltage signals through algorithms, then the headlight control module drives the motor to adjust the headlights. The vehicle is equipped with corresponding sensors that automatically detect the dynamic balance status during driving. 3. Some models lack headlight height adjustment functionality and thus have no adjustment button. Fine-tuning can be done by adjusting the small knob on the headlight assembly.
9
4
Share

What is the fuel consumption of the Wrangler 3.8?

Wrangler 3.8l model's actual fuel consumption is 15.8 liters/100 kilometers. Factors affecting fuel consumption: Driver's driving habits, road conditions, weight of items placed in the car, whether the air conditioning is on, and whether the vehicle is in the break-in period, among other factors, will all affect the vehicle's fuel consumption. Ways to reduce fuel consumption: Start in low gear, gently press the accelerator, and gradually increase speed; avoid prolonged idling or low-speed driving; avoid excessive vehicle load and a full fuel tank; avoid using high-viscosity engine oil; try to control speed with the accelerator rather than the brake.
15
4
Share

Is the Leiling a Three-Cylinder or Four-Cylinder?

The Leiling is a four-cylinder model. Here are specific methods to distinguish between three-cylinder and four-cylinder engines: 1. On the mechanical level, the main difference between a three-cylinder and four-cylinder car lies in the number of cylinders. Since a three-cylinder engine has one less cylinder than a four-cylinder, its size is smaller. Three-cylinder engines are generally equipped with turbochargers to compensate for their smaller displacement and weaker power output. 2. In a three-cylinder engine, the crankshaft connecting rod mechanism applies complex variable forces to the crankshaft during operation, causing engine vibration. In contrast, inline four-cylinder engines have cylinders 1 and 4, and cylinders 2 and 3 moving up and down together, which helps suppress vibration to some extent. Therefore, Mercedes-Benz's four-cylinder engines also incorporate balance shafts.
2
1
Share

How to Set Up the Honking Sound When Locking the Elantra?

To set up the honking sound when locking the Elantra, you need to install an additional anti-theft device. Here are the detailed specifications of the Elantra: 1. Interior: It comes with an auto-dimming rearview mirror, which not only enhances driving safety but also integrates the latest BlueLink human-vehicle interaction system. 2. Powertrain: The Elantra is equipped with a 1.6L γ engine and a 1.8L Nu engine. The 1.6L engine delivers a maximum power of 127 horsepower and a maximum torque of 155N·m, while the 1.8L engine uses the latest Nu technology, producing a maximum power of 145 horsepower and a maximum torque of 175N·m. 3. Transmission: It is paired with a 6-speed manual transmission and a 6-speed automatic transmission.
20
0
Share

How to manually reset the tire pressure on a Great Wall H2?

The specific method for manually resetting the tire pressure on a Great Wall Haval H2: Start the Great Wall Haval H2 vehicle to power on and illuminate the display screen, then press the vehicle information button. Locate the tire settings in the vehicle settings on the Great Wall Haval H2 display screen and click on it. Click on SET in the tire settings on the Great Wall Haval H2 display screen. Click confirm on the Great Wall Haval H2 display screen. After the "Tire Pressure Monitoring Initialization" is completed on the Great Wall Haval H2 vehicle, the tire pressure will be reset. Tire pressure reset: Tire pressure reset is the operation of resetting the tire pressure monitoring system after the tire pressure fault has been resolved.
11
4
Share

Does Stage 1 ECU Tuning Affect the Car?

Stage 1 ECU tuning does have effects on the car: After ECU tuning, the car will require higher-quality gasoline. Using low-quality gasoline may damage the vehicle. The engine will also have higher temperature requirements. After ECU tuning, the engine operates at overclocked frequencies, and without an excellent cooling system, this can impact the engine's lifespan. The 4S store may refuse warranty coverage. Vehicles with modified ECUs can be denied warranty services by 4S stores. Here is additional information: The principle of car ECU tuning The operation of a car engine is controlled by the car's computer (i.e., the ECU). The ECU controls the engine's air intake, fuel injection, ignition timing, etc., thereby determining the engine's operational efficiency, power, torque, and other factors. Information such as air intake, fuel injection, and ignition timing corresponding to various engine speeds, gears, loads, temperatures, and other conditions is recorded in the ECU in the form of a database, known as the "M.A.P."
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.