What are the effects of not applying film to the windshield?

Where is the fuse for the Buick Excelle cigarette lighter located?

Buick Excelle cigarette lighter fuse is located in the fuse box under the dashboard cover. Instructions for using the cigarette lighter: 1. Turn on the car power and insert the cigarette lighter into the car power socket; 2. Press down to lock; 3. The cigarette lighter begins heating. When the heating wire reaches the required temperature, it will automatically pop out or wait 5-8 seconds until the heating wire turns red, then manually remove it. Precautions for using the cigarette lighter: 1. Frequent plugging/unplugging may cause the lighter to get stuck in the socket and fail to heat; 2. When the heating wire reaches temperature and glows red, the retaining spring may deform due to high temperature; 3. Regularly check if the socket retaining spring has become loose.

14

5

Share

How to steer when the car is leaning to the left?

When reversing to the left, turn the steering wheel to the left. Just remember one thing when reversing: to move the rear of the car in a certain direction, turn the steering wheel in that direction. Because car brands are different, models are different, reference points are different, the timing of steering when reversing is basically different for each car, and it cannot be generalized. Because the light may be too dark to see clearly, it is recommended to get out of the car and observe the exact position before reversing. This is for safety considerations and also makes it easy to correct the body position immediately.

16

5

Share

What is the reason for white smoke coming from the exhaust pipe after carbon cleaning?

The reasons for white smoke coming from the exhaust pipe after carbon cleaning are: 1. Residual cleaning agent sprayed inside during cleaning; 2. When the vehicle is started, the residual cleaning agent will burn along with the fuel, and if the air-fuel mixture is too rich, it will produce white smoke. The exhaust pipe is installed between the engine exhaust manifold and the muffler, allowing the entire exhaust system to have flexible connections, thereby reducing vibration and noise, facilitating installation, and extending the life of the exhaust muffler system. The maintenance methods for the exhaust pipe are: 1. Regularly check if the exhaust pipe is cracked; 2. Regularly inspect the exhaust pipe for abnormal noises; 3. Regularly check for any foreign objects inside the exhaust pipe; 4. Let the engine idle for 10 minutes before starting to expel accumulated water inside.

6

0

Share

What is the method for adding windshield washer fluid?

The method for adding windshield washer fluid is: 1. Use the wiper control knob to first spray out the old washer fluid; 2. After completely spraying out the existing fluid, open the washer fluid reservoir and add a small amount of new washer fluid solution; 3. Activate the washer spray function again to flush out any remaining old fluid; 4. When no more fluid sprays from the nozzles during the second activation, refill with new washer fluid and securely close the cap. Windshield washer fluid consists of water, alcohol, and ethylene glycol, serving as a cleaning liquid for vehicle windshields. Its functions include: 1. Windshield cleaning via wipers; 2. Anti-freeze and anti-fog properties.

12

2

Share

How are license plates ending with letters restricted?

Vehicles with license plates ending in English letters are managed as even-numbered plates. Within urban areas, odd-even license plate restrictions are implemented, with odd-numbered plates allowed on odd days and even-numbered plates on even days. Based on the last Arabic digit of the vehicle license plate (including temporary plates), they are divided into five groups. On Mondays, plates ending with "1" and "6" are restricted. The odd-even driving restriction is implemented 24 hours a day, with plates ending in letters or Chinese characters managed as even-numbered plates. Vehicle license plates ending with English letters are managed as number "0".

16

0

Share

How to Perform Front-First Parallel Parking?

First, drive past the parking space to assess whether it can accommodate your vehicle. Quickly shift your gaze from the right rearview mirror to the left rearview mirror, paying attention to oncoming traffic and obstacles on the left side. While turning the steering wheel fully, slowly reverse until the left rearview mirror can completely see the front of the car behind you, then straighten the wheels and continue reversing. Observe the distance between the right rear wheel and the curb. When it seems appropriate, turn the steering wheel fully to the left and try to get the car as close to the curb as possible. Once most of the car is in the parking space, the driver should determine the distance from the car behind by turning their head or using the parking assist system.

2

4

Share

What are the effects of not applying film to the windshield?

Where is the fuse for the Buick Excelle cigarette lighter located?

How to steer when the car is leaning to the left?

What is the reason for white smoke coming from the exhaust pipe after carbon cleaning?

What is the method for adding windshield washer fluid?

How are license plates ending with letters restricted?

How to Perform Front-First Parallel Parking?

How to Open the Hood of Volkswagen Lavida XR?

Why does the car lack power when starting in winter?

What are the causes of the sunroof rattling in the Prado?

Where is the cabin air filter located in a Buick Excelle?