What are the effects of exhaust pipe leakage in a car?

2 Answers
PresleyRose
07/24/25 6:14pm
The effects of exhaust pipe leakage in a car are as follows: Here are the relevant introductions: 1. Increased noise: If the leakage is located before the muffler, it will cause increased noise. The exhaust pipe is installed between the engine exhaust manifold and the muffler, allowing the entire exhaust system to have flexible connections, thereby reducing vibration and noise. 2. Exhaust emissions: If the leakage is before the catalytic converter, it will affect the quality of exhaust emissions, possibly leading to failed vehicle inspections. 3. Power: It has almost no effect on power, as the exhaust pipe discharges waste gases, which have little impact on the engine's operation and driving performance.
Was this review help?
1
4
Share
EleanorMarie
08/11/25 10:07am
Previously, while driving, I noticed that the exhaust pipe was leaking, and the car noise suddenly became ridiculously loud. People on the road thought a junk car was coming. The power was also noticeably insufficient—stepping on the accelerator didn’t increase the speed, and fuel consumption kept rising. Worse, harmful gases like carbon monoxide could leak into the car, especially in winter when the heater is on, making it easy for toxins to accumulate inside, leading to dizziness or even poisoning risks. Prolonged leakage can also accelerate engine wear and even spark flames that could ignite other components, posing safety hazards. Once, I almost had an accident. After discovering the leak, I immediately drove to a professional repair shop. The mechanic said regular checks of the exhaust system are crucial—it’s best to inspect for rust at the joints and seals every six months, rather than waiting for it to become a major issue.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

What maintenance does a car need at 60,000 kilometers?

The maintenance required for a car at 60,000 kilometers is as follows: 1. Replace engine oil, oil filter, air filter, fuel filter, cabin air filter, coolant, and brake fluid. 2. Automatic transmissions require transmission fluid replacement. 3. Replace spark plugs, power steering fluid, and timing belt. 4. Clean the throttle body, fuel injectors, and catalytic converter. 5. Inspect tires and chassis bolts. Additional information: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of a car, also known as car servicing.
13
5
Share

What does the abolition of provincial expressway toll stations mean?

Highway provincial boundary toll stations being abolished means the removal of toll stations at provincial borders, utilizing methods like ETC to achieve seamless passage. Additional information is as follows: 1. Toll Stations: Toll stations are facilities used to collect tolls from passing vehicles. Toll roads or toll interchanges must have toll stations. There are generally two types of toll station locations: one is directly set on the main line, also known as a barrier type, mostly used at the start and end points of toll sections on the main line; the other is set on interchange ramps or connecting lines, generally used for interchange points between toll sections on the main line to control vehicles entering and exiting the main line from intersecting roads. 2. Mainline Toll Stations: Mainline toll stations refer to toll stations set on the main line. In a closed toll system, besides one mainline toll station at each end of the expressway, the rest are located on ramps. In an open toll system, toll stations or mainline/ramp barrier-type mainline toll stations are typically set at certain intervals along the expressway, with bidirectional toll stations. The disadvantage of mainline toll stations is that the anticipated high traffic volume may require toll plazas to be too wide, making the road right-of-way impractically broad, leading to difficulties in land acquisition and potential issues such as insufficient minimum turning radius.
13
4
Share

What causes water leakage in the interior dome light?

Water leakage in the interior dome light may be caused by improper sealing of the sunroof or gaps in the roof lining. More information about interior dome lights is as follows: 1. Interior dome lights are installed in various cabin locations to facilitate safe entry/exit at night and map reading while driving. 2. When designing the layout, the light switch (SW) should be operable from both front and rear seats. SW typically has three positions: ON, OFF, and door-linked mode. To minimize light thickness, 5~10W bulb units are commonly used. For spacious cabin illumination requirements, bulbs with 8~30W power are generally employed.
14
1
Share

Why does the car AC make noise and not cool when turned on?

Reasons for car AC making noise and not cooling when turned on are as follows: 1. Belt slipping: The AC compressor is driven by the engine crankshaft via a belt. If the belt is loose, aged, severely worn, or the pulley tension is insufficient, it can cause the belt to slip, resulting in a hissing noise. 2. AC compressor failure: When the AC switch is turned on, the AC compressor starts operating. If the compressor is damaged, it may produce a hissing noise. 3. Foreign objects in the air duct: If there are foreign objects in the AC system's air duct, they can rotate with the blower airflow and repeatedly hit the air filter, causing a hissing noise.
2
5
Share

Where is the best place to put a fire extinguisher in a car?

When fighting a fire, every second counts. If the fire extinguisher is placed in the trunk, the rescue time will be greatly delayed. Therefore, the car fire extinguisher should be placed as close to the driver's seat as possible and in a position that is easy to access, such as under the driver's seat or the front passenger seat. The specific introduction is as follows: 1. The most critical thing is to extinguish the initial fire: When the car has a burning smell or emits thick smoke, the owner should immediately understand that this is a precursor to spontaneous combustion and take action as soon as possible. First, park the moving vehicle in a safe and less crowded place as soon as possible, quickly cut off the oil circuit and power supply, and prepare the fire extinguisher. 2. Spraying the root of the flame is effective: When extinguishing the fire, do not rush to open the hood completely, because the air flow will cause open flames to appear, so be careful to avoid it. Choose to stand in the upwind direction, turn the fire extinguisher upside down several times to loosen the dry powder inside. Hold the middle of the fire extinguisher with your left hand, pull off the safety ring on the pressure handle with your right hand, and aim the nozzle at the most intense burning point to press the pressure handle. Do not spray at the surface of the flame, but aim at the root of the flame to spray, quickly push forward, and confirm that the flame is completely extinguished before moving the fire extinguisher away. After the vehicle has cooled down, check it again. You can refer to the usage method of the dry powder fire extinguisher to correctly operate the fire extinguisher to extinguish the fire.
20
3
Share

What Causes Squealing and Ineffective Braking During Emergency Stops?

Here are the specific reasons for squealing noises and difficulty braking during emergency stops: 1. When installing new brake pads without resurfacing the old brake rotors, causing improper fit. Improper installation or fitting new pads directly onto uneven old rotors will result in uneven wear of the new brake pads. 2. There might be defects in the braking system itself, causing the brake pads to only partially contact the rotors. This increases pressure per unit area, leading to squealing. It's recommended to inspect components like calipers and guide pins. 3. Foreign objects may be present, causing mismatched contact surfaces and resulting in noise.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.