What are the effects of changing from 165 tires to 185?

2 Answers
StAna
08/28/25 4:05am
The effects of changing from 165 tires to 185 are: increasing the width of the tires, which enlarges the contact area with the ground. When the vehicle is in motion, this increases the friction between the tire and the ground, thereby improving the vehicle's handling, especially during cornering, where the tires can provide better grip, enhancing driving safety in rainy conditions. The negative effects include a potential increase in fuel consumption and greater tire noise. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are typically installed on metal rims and serve to support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure the vehicle's driving performance.
Was this review help?
10
1
Share
McAnthony
09/10/25 2:38am
After driving for twenty years, the most noticeable change when switching from 165 to 185 wide tires is the significantly improved grip, especially on slippery roads where the car is less prone to skidding, and the handling feels more stable. During high-speed turns, the car stays firmly planted. However, fuel consumption definitely increases. Previously, a full tank could cover 500 kilometers, but now it might drop to around 450, costing more in fuel. It's important to note that the rims may not match the original design. Forcing them on could cause the tires to rub against the wheel arches during turns, putting extra strain on the suspension over time. Also, be mindful of regulations—modifying tire width requires registration. While safety improvements are beneficial, don’t overlook the economic impact and vehicle condition. It's advisable to test the actual fuel consumption before deciding on long-term use.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

Where is the child safety lock located in a car?

Child locks are typically located in the window button area on the driver's side door or along the inner edge of the rear doors. Here are the details about child locks: How to use: When you need to activate the child safety lock, first open the rear door, gently move the small lever below the door lock in the direction of the child icon, and then close the door. Function: When the child safety device is in the locked state, the door can only be opened from the outside, and the interior door handle temporarily loses its function. Even if the central locking system is unlocked, the child safety lock remains engaged, allowing the door to be opened only from the outside. If you find that the rear door cannot be opened from the inside while it opens normally from the outside, check whether the child safety lock has been accidentally activated.
16
0
Share

What is the difference between factory paint and repaint?

From the perspective of paint layers, factory paint consists of four layers, while repaint only has three layers, lacking the electrophoretic layer. As a result, repaint may develop color differences after some time of use. In terms of application techniques, factory paint is applied by machines, ensuring even spraying, excellent adhesion, and high-temperature resistance. In contrast, repaint is done manually, which can lead to issues like peeling and fading. Below are some advantages of factory paint: Factory paint has a very thin coating: The thickness does not exceed 0.1 millimeters, equivalent to the diameter of a strand of hair. Despite its thinness, factory paint boasts strong adhesion, high hardness, and good wear and corrosion resistance. Factory paint provides uniform color: During production, manufacturers use the same type of paint, sometimes even custom-made specialized paint. Whether in terms of color or type, the paint is perfectly matched to the product, ensuring consistent thickness and uniform color without any color discrepancies.
9
3
Share

Can a tire with a 55 aspect ratio be replaced with a 60?

Tire with a 55 aspect ratio can be replaced with a 60. The steps for changing a tire are: 1. Park the vehicle, turn off the engine, and engage the handbrake to prevent sliding; 2. Loosen the screws in a diagonal pattern; 3. Lift the vehicle to a certain height; 4. Remove the screws and take off the tire; 5. Install the new tire and tighten the anti-theft screws in a diagonal pattern; 6. Lower the vehicle and tighten the screws and nuts. Things to note when changing tires include: 1. Check the expiration date, inventory should not exceed 3 years; 2. Observe the tread pattern and color; 3. Check if the joint between the tread and sidewall is smooth; 4. Avoid mixing tires with different structures and sizes.
14
2
Share

What is the Venueir car from Venucia?

There is no car model named Venueir. Only a brand with similar letters exists, which is Venucia. Venucia originates from Greek, meaning the Morning Star. In Chinese, it is called Dongfeng Venucia, symbolizing the first ray of light that heralds the dawn and guides the future direction. Additional Information: Venucia Motors: The Venucia brand was established on September 8, 2010, and launched its first model, the D50, in April 2012. Venucia Motors is a key component of Dongfeng Group's "Big Self-owned" strategy and became officially independent in 2017. About the Brand: The current brand logo of Venucia was introduced on its 7th anniversary. The early logo featured a blue background with a large white star surrounded by four smaller five-pointed stars (three blue and one white).
16
0
Share

How to Install One-Key Start in Lavida?

Lavida one-key start installation method is: 1. Install the induction device on the door handle; 2. Disassemble the instrument panel and door panel, and take out the wiring harness inside; 3. Solder the wiring of the one-key start device. It is recommended to go to a professional modification shop for installation. The car one-key start is part of the smart car device, which is a button device that realizes a simplified ignition process and can also be used to turn off the engine. Lavida is the first A-class car independently developed by Shanghai Volkswagen. The waistline design of the body is relatively sharp, while retaining the side profile similar to the Octavia. The advantage of this design is that it facilitates the entry and exit of rear seat passengers. The 2610mm wheelbase also ensures a comfortable rear seating space for Lavida.
11
0
Share

What is the appropriate position to adjust the rearview mirror?

Adjust the rearview mirror so that the horizon line is positioned at two-thirds of the mirror's height, and then adjust the edge of the car body to occupy one-fourth of the mirror's image. The rearview mirror is a tool that allows the driver to directly obtain external information about the rear, side, and lower areas of the car while seated in the driver's seat. For the convenience of the driver's operation, to prevent traffic safety accidents, and to ensure personal safety, all countries require that cars must be equipped with rearview mirrors, and all rearview mirrors must be adjustable in direction. For example, the adjustment method for the center rearview mirror is to move it left or right until the left edge of the mirror just cuts off the right ear of your reflection in the mirror. This means that under normal driving conditions, you cannot see yourself in the center rearview mirror. The up and down adjustment involves positioning the distant horizon in the center of the mirror.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.