What Are the Effects of a Missing Mudguard?

1 Answers
ArcherFitz
07/30/25 9:54am
Mudguards can effectively protect the car body and prevent scratches. Therefore, if a mudguard falls off, it can be replaced. The functions of a mudguard are as follows: 1. Protect the paint: Mudguards can protect the car paint. Car tires have tread patterns, so when driving, sand and stones on the road can squeeze through the gaps in the tread. At high speeds, sand and stones can cause significant damage to the car paint. 2. Protect mechanical components: Mudguards can protect mechanical structures. When driving on the road, you may encounter various road conditions. In bad weather or poor road conditions, mud and water can be splashed up. Without a mudguard, these particles can enter the car's mechanical components. 3. Block mud and rainwater: Mudguards can block mud and rainwater. While driving, the mudguard will prevent most of the mud from splashing onto the car body, keeping it cleaner. Additionally, passengers will not get dirty when getting in or out of the car.
Was this review help?
7
1
Share
More Forum Discussions

Where is the cabin air filter located in the Trumpchi GS8?

The cabin air filter in the Trumpchi GS8 is located inside the glove compartment on the front passenger side. Replacing the cabin air filter involves a relatively complex disassembly process, including removing the glove compartment, decorative panels, and over a dozen screws. To avoid unnecessary component damage, it is recommended to have it replaced at a 4S shop or a repair shop. The cabin air filter in the Trumpchi GS8 should be replaced every 20,000 kilometers, but in harsh driving conditions, it is advisable to shorten the replacement interval. Function of the cabin air filter: It filters out impurities, tiny particles, pollen, bacteria, industrial exhaust, dust, and other contaminants from the air entering the cabin, improving air cleanliness and preventing these substances from damaging the air conditioning system. This ensures a better air environment for passengers inside the vehicle. Maintenance of the cabin air filter: If the filter is dirty, clean it by blowing compressed air from the reverse side. Hold the air gun about 5 cm away from the filter and blow at a pressure of 500 kPa for approximately 2 minutes. The cabin air filter tends to accumulate a lot of dust, and compressed air can be used to blow away loose dust. Never wash it with water, as this can easily damage the filter. Poor maintenance of the cabin air filter can lead to the accumulation of dust and dirt on the filter plate, radiator, evaporator, and fin surfaces, causing airflow blockage. Additionally, the air conditioning system may experience reduced cooling and heating efficiency, increased power consumption, noise, and a shortened lifespan. Impact of not replacing the cabin air filter: Long-term use without replacement can cause impurities on the filter to mold, producing bacteria and unpleasant odors, which can harm the health of the driver and passengers and even induce respiratory diseases. If the air filter is severely clogged, it can increase the engine's intake resistance, leading to reduced engine power, poorer engine performance, increased fuel consumption, and accelerated engine wear and carbon buildup. Precautions for replacing the cabin air filter: Purchase a cabin air filter from a reputable manufacturer, ensuring the appearance and dimensions are checked and compared. Always replace the cabin air filter with the vehicle turned off. When loosening screws and removing clips, be sure to apply appropriate force. During installation, pay attention to the orientation of the cabin air filter to avoid installing it backward. After installation, check if the filter is properly seated, ensuring the filtering surface covers the entire air duct and fits snugly around the edges. Otherwise, filtration may fail. Precautions for using the car's air conditioning system: Do not turn on the heating immediately when warming up the car in the morning. Wait until the engine coolant temperature rises before activating the air conditioning. Do not set the air conditioning temperature too high. Prolonged exposure to excessively hot temperatures can cause drowsiness and affect driving. Also, avoid directing warm air straight at the face. If fogging occurs on the windows after turning on the heating, increase the fan speed and let it blow for a while longer. This will help the fog disappear without recurring. During long-distance driving, ventilate the cabin periodically. Poor air circulation in an enclosed space can lead to breathing difficulties for passengers over time. Turn off the air conditioning before parking and switch to external circulation with natural air. This helps clean the air conditioning system's ducts and prevents bacterial growth.
5
0
Share

Can Chinese Driver's License Be Used in Japan?

Chinese driver's license cannot be used in Japan, only an international driver's license is allowed. Below is relevant information about international driver's licenses: 1. Limitations: Although international driver's licenses exist, their applicability is still significantly restricted due to varying national regulations. 2. Certified Translation Document: An international driving permit is a certified translation document proving the holder possesses valid driving credentials in another country. Issued by authorized international organizations under the United Nations Road Traffic Convention, it certifies drivers who already hold a valid domestic license. 3. Driving Abroad: Its primary purpose is to eliminate obstacles faced by drivers abroad due to differing license requirements across countries.
8
1
Share

Is the car film applied on the inside or outside?

Car film is applied on the inside. Here is some relevant information about car film: 1. Benefits of applying car film on the inside: From a physics perspective, applying the film on the inside reduces light transmittance and increases the tension of the car glass, which can mitigate external forces. Even if the glass breaks, it won't shatter into small pieces. 2. Car heat insulation film: Car window tinting involves applying a thin film layer to the front and rear windshields, side windows, and sunroof. This film is also known as solar film or heat insulation film.
13
5
Share

Can I continue driving if the ESP warning light is on?

It is not recommended to continue driving if the ESP warning light is on, as it indicates a brake system malfunction. Continuing to drive poses safety risks. The causes for the ESP warning light being on may include ABS pump failure, ABS pump power or grounding circuit issues, loose sensor connectors, sensor failure, blown fuses, obstructed system signal transmission, or system false alarms. ESP is a component of the vehicle's active safety system, extending the functionality of the anti-lock braking system (ABS) and traction control system (TCS). When the vehicle is braking and the tires are about to lock up, the ESP system employs mechanical intermittent braking to allow the driver to maintain steering control even during full braking.
8
1
Share

What does it mean when the air-bag light is on?

AIR-BAG refers to the airbag. If this light stays on, it indicates a fault in the airbag system. Extended related information is as follows: Airbag Distribution: Airbags are distributed in three directions within the vehicle—front (driver and passenger seats), side (front and rear seats), and roof. Inertial Impact Force: The inertial impact force causes a sliding weight to move forward, pushing the gas reservoir to rapidly inflate the airbag hidden in the center of the steering wheel and near the dashboard, thereby reducing injuries to occupants. Fault Causes: The airbag status is abnormal, which could be due to broken sensor wires, improper installation, or damage caused by incorrect disassembly and assembly.
7
5
Share

What are the length, width, and height of the Chevrolet Tracker?

The Chevrolet Tracker has a length of 4411mm, a width of 1808mm, and a height of 1633mm. The Chevrolet Tracker is a compact SUV produced by SAIC-GM Chevrolet, equipped with a 1.3T 165-horsepower L3 engine and a CVT continuously variable transmission. The engine delivers a maximum power of 121kW and a maximum torque of 240Nm. The Chevrolet Tracker features a turbocharged intake system, with a top speed of 195km/h and a 0-100km/h acceleration time of just 9.1 seconds. It utilizes electric power steering and a unibody structure, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.