What are the effects of a faulty oxygen sensor in the catalytic converter on a car?

Which car brand features a snake and cross in its logo?

The logo featuring a snake and cross elements belongs to Alfa Romeo. Below is an explanation of the Alfa Romeo logo's significance: 1. The red cross is part of the coat of arms of Milan, commemorating the ancient Crusader knights; the dragon-snake pattern originates from the emblem of an old noble family in Milan. These two symbols representing Milanese traditions, though unrelated in meaning, combine to form one of the most famous logos in the automotive world. 2. The logo embodies a modern style with a historical touch, suggesting constant innovation and technical perfection, accompanied by a poetic name, like a sprite from a dream.

13

5

Share

Is it okay to start an automatic transmission vehicle in P gear?

Automatic transmission vehicles can be directly started in P gear. P gear is the most common gear in automatic transmission vehicles, usually located at the frontmost position of the gearshift console, in front of the R gear, designed to lock the axle when the car is stationary on a slope. Here is an introduction to automatic transmission: 1. As the name suggests, automatic transmission does not require the driver to manually shift gears; the vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Generally, there are six gear positions in an automatic transmission car, from top to bottom: P, R, N, D, S, L. 2. Driving an automatic transmission car using only the parking gear P, reverse gear R, neutral gear N, and drive gear D can fully meet the needs of general driving. If encountering some special driving environments, other functional gears may be needed. Therefore, if the correct operation and control method is chosen, an automatic transmission car can perform better than a manual transmission car.

12

1

Share

Why does the Q5's brakes squeak?

Q5 brake squeaking is a common issue, and currently, there is no suitable solution. It is said that the main reason for the "squeaking" is due to the car's high power—the heavier the vehicle and the faster it goes, the higher the required friction coefficient. The brake noise is caused by the friction between metal particles in the friction material and the brake disc, and this noise does not affect safety. Below is some relevant information about the Q5: 1. The new Audi Q5 still comes equipped with the EA888 2.0-liter turbocharged direct-injection engine. The entry-level 35TFSI model is the low-power version, with a maximum power of 132kW at 4000-6000rpm and a peak torque of 320N·m at 1500-3900rpm. 2. The other five 40TFSI models are high-power versions, with a maximum power of 155kW at 4300-6000rpm and a peak torque of 350N·m at 1500-4200rpm. Except for the entry-level 35TFSI, which comes with a 6-speed manual transmission, the other five 40TFSI models are equipped with an 8-speed automatic transmission.

20

2

Share

What are the body dimensions of the GAC Trumpchi GM8?

The body dimensions of the GAC Trumpchi GM8 are 5066mm in length, 1923mm in width, and 1822mm in height, as per official data. The length of the GAC Trumpchi GM8 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetrical plane, touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two parallel planes parallel to the vehicle's longitudinal symmetrical plane, touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The GAC Trumpchi GM8 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 252 and a peak torque of 390 Nm, paired with an 8-speed automatic transmission. National regulations stipulate specific dimensions for vehicles. According to the national standard 'GB1589-89,' the total width of a vehicle excludes side mirrors. The limitation on vehicle width is designed to ensure sufficient lateral clearance for overtaking in adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in providing adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.

9

0

Share

Why Shouldn't You Coast a Car in Neutral Gear?

Here are the reasons why coasting a car in neutral gear is not recommended: 1. When coasting in neutral, the engine stops running, and the air compressor ceases to operate. Since the car frequently needs to brake, the compressed air in the air reservoir continuously depletes, which may lead to brake failure. 2. It can easily damage the transmission. Most transmissions use rolling bearings extensively. While coasting in neutral, the second shaft of the transmission rotates, but the constant-mesh gears do not. As a result, these gears cannot agitate the gear oil in the transmission, causing bearings (especially those positioned higher and relying on splash lubrication) to lack reliable lubrication, leading to premature wear of bearings and gears. 3. Some drivers, aiming to save fuel, depress the clutch and let the engine stall to coast. After descending a slope, they suddenly release the clutch pedal to restart the engine. At this point, power is transmitted in reverse: drive wheels → half shafts → differential → reduction gear → drive shaft → transmission second shaft → synchronizer → clutch. The sudden engagement of the clutch with the stationary flywheel subjects the clutch to enormous impact loads, which can easily damage the clutch friction disc.

15

0

Share

How many kilometers can a run-flat tire travel after a puncture?

According to the characteristics of run-flat tires, after a puncture, they can still maintain a speed of 80km/h, allowing you to drive for about an hour and cover a distance of nearly 80 kilometers. Here is some information about run-flat tires: Advantages of run-flat tires: In the event of a tire leak, even if the air pressure inside the tire is completely lost, you can continue driving at a speed of 80 km/h without having to replace the tire immediately. Disadvantages of run-flat tires: In terms of tire quality, due to the thicker sidewalls, run-flat tires of the same specifications are heavier than ordinary tires, which to some extent can reduce the performance of the car.

16

4

Share

What are the effects of a faulty oxygen sensor in the catalytic converter on a car?

Which car brand features a snake and cross in its logo?

Is it okay to start an automatic transmission vehicle in P gear?

Why does the Q5's brakes squeak?

What are the body dimensions of the GAC Trumpchi GM8?

Why Shouldn't You Coast a Car in Neutral Gear?

How many kilometers can a run-flat tire travel after a puncture?

Are Car Air Purifiers Useful?

How often should the transmission fluid of an Audi A4L be changed?

Where is the lighting control module of Changan Eado located?

Difference Between N Gear and P Gear?