What are the effects of a faulty camshaft position sensor?

What is the emission standard of the 2017 Vios?

2017 Vios complies with the China V emission standard. Below are several methods to identify a car's emission standard: 1. Check the environmental protection label issued during the vehicle inspection. Upon passing the inspection, an environmental protection label is issued, which should be affixed to the upper right corner of the windshield. The standard will clearly indicate the car's emission level. 2. Visit the official website of the Motor Vehicle Exhaust Pollution Supervision and Management Center or the local traffic management bureau's website to inquire. 3. Bring the vehicle registration certificate (original or copy) to the vehicle management office for inquiry. 4. Make an approximate judgment based on the vehicle's registration year. Most cars registered after 2017 are China V; those registered after 2008 are mostly China IV; cars registered in 2007 might be China III or China IV; cars registered before 2007 are generally below China IV, meaning China III or China II; cars registered before 2005 are mostly China II.

6

2

Share

What is the fuel tank capacity of the City?

The fuel tank capacity of the City is 42 liters. Here are some details about this model: 1. Exterior. The front fascia design of the new-generation City is very similar to the new Fit, with very pronounced lines on the front fenders. The body features a dual waistline design, while the rear styling somewhat resembles the current Honda Crider. 2. Body dimensions. The new-generation City has seen significant improvements in body dimensions, measuring 4440/1695/1495mm in length, width, and height, with a wheelbase of 2600mm. 3. Powertrain. The new-generation City is equipped with the latest Earth Dreams series engines, with the 1.3L variant producing a maximum power output of 73kW and the 1.5L variant delivering 96kW. The transmission system offers a choice between a 5-speed manual and a CVT continuously variable transmission.

2

5

Share

Why does the car still pull to one side after a wheel alignment?

If the car still pulls to one side after a wheel alignment, you need to check the tire pressure and also inspect the brakes. If the car pulls to one side during braking, then the braking system needs to be checked. Below are the detailed explanations: 1. If the tire pressure of the two front tires is not the same, the car will pull to one side while driving. The front wheels have camber and toe-in angles, and the rear wheels also have camber angles. If there is an issue with the wheel alignment data, the car will pull to one side. For some cars, incorrect wheel alignment data can also cause uneven tire wear. 2. When driving over bumpy roads or speed bumps, the wheel alignment data of the car may change. Therefore, it is recommended to have a wheel alignment done regularly to ensure the car remains in good condition.

1

Share

How to Check if the Headlights Are Genuine OEM Parts?

Methods to check if the headlights are genuine OEM parts are as follows: 1. The quality of aftermarket headlights varies widely, and the edge transitions of the headlights cannot match the perfection of OEM headlights, often exhibiting many burrs. Additionally, the engraved characters and logos on the headlights tend to be blurry. 2. Due to insufficient manufacturing standards, aftermarket headlights often have significant tolerances, resulting in uneven gaps between the headlights and the car body after installation, with noticeable left-right deviations. 3. The lighting performance of aftermarket headlights is generally inferior, with slower response times and even uneven brightness between the left and right sides. Headlights come in two forms: high beam and low beam. Use low beam on urban roads with streetlights, and switch to high beam when driving on unlit roads or highways. When meeting another vehicle, switch from high beam to low beam.

3

1

Share

Where is the Air Conditioning Filter Located in the New Generation Focus?

The air conditioning filter in the new generation Focus is located inside the glove compartment on the passenger side. Replacement method: 1. First, open the glove compartment on the passenger side. 2. Locate and remove the securing clips to reveal the air conditioning filter cover. 3. Remove the cover, take out the old air conditioning filter, and install the new one. 4. Reassemble in the reverse order of disassembly to restore to the original position. Extended content: The functions of the air conditioning filter are: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, and other substances from the air, with strong and lasting moisture adsorption. 4. It prevents car windows from fogging up, ensuring clear visibility for drivers and passengers and safe driving; it provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety; it effectively sterilizes and deodorizes.

9

4

Share

Which Generation is the DQ200 Transmission?

dq200 transmission has been updated to the fourth generation, with relatively mature technology. Practical experience shows that its gearshift hesitation is acceptable, and it has relatively low fuel consumption. Here are the advantages of the dq200: 1. Fuel economy. It saves the related hydraulic system and the high torque transmission efficiency inherent in the dry clutch, improving fuel economy. Data shows that for the same 77Kw engine, the 7-speed DSG transmission saves over 10% more fuel than the 6-speed wet dual-clutch transmission. 2. Reduced lubrication oil requirement. In addition to higher transmission efficiency, it also eliminates components such as filters, oil coolers, and high-pressure oil pipes in the transmission housing, requiring only 1.7 liters of transmission oil compared to the 6.5 liters needed for the 6-speed DSG transmission. 3. Compact size. Due to layout and the choice of friction materials, the dry dual-clutch is smaller in size than the wet dual-clutch.

7

0

Share

What are the effects of a faulty camshaft position sensor?

What is the emission standard of the 2017 Vios?

What is the fuel tank capacity of the City?

Why does the car still pull to one side after a wheel alignment?

How to Check if the Headlights Are Genuine OEM Parts?

Where is the Air Conditioning Filter Located in the New Generation Focus?

Which Generation is the DQ200 Transmission?

What is a Plug-in Hybrid Electric Vehicle?

How to Turn on the Air Conditioning in BAIC New Energy Vehicles?

What is the difference between the P gear and the handbrake in an automatic transmission?

What Does Clutch Free Play Mean?