···
Log in / Register

What Are the Effects After Replacing the Chassis Bushings on an Old Car?

4 Answers
DelMariana
09/04/25 7:01am

Affects the stability and handling of the vehicle. There are the following precautions for the car chassis: 1. Subframe bushings: When installing subframe bushings, you can first heat the subframe, being careful not to make the temperature too high, utilizing the principle of thermal expansion and contraction. Then, apply some grease on the subframe bushings and use tools to install them. Generally, if there is no significant gap in the subframe bushings, they do not need to be replaced. Since the subframe represents the safety system of the car, it must not be taken lightly. 2. Ensure driving safety: The round holes on the subframe for the bushings will enlarge slightly each time the bushings are replaced. After several replacements, the holes may become larger than the bushings themselves, creating a gap between the hole and the bushing. At this point, it is necessary to replace the subframe promptly to ensure driving safety.

Was this review help?
15
1
Share
LaTyler
09/16/25 7:53am

I just replaced the suspension bushings on my decade-old car, and it feels like the whole vehicle has been reborn! Before, going over speed bumps or rough roads made the body sway like a boat, which was really uncomfortable. Sometimes when turning, the steering wheel would creak, affecting the sense of control and safety. After installing the new bushings, all those strange noises are gone, and the car is as stable as a rock, feeling as tight as a new one. The ride is much smoother now, and my wife says the kids don't get carsick anymore when we go out. It's a huge relief for me. Spending a few thousand bucks was totally worth it—don't underestimate these small parts; regular maintenance can really extend an old car's life. Just make sure to get them replaced at a reputable shop to avoid improper installation and future issues.

Was this review help?
5
5
Share
Expand All
SabrinaLynn
10/30/25 8:28am

I recently replaced the suspension bushings on my old car, and the results are truly impressive. The driving experience is night and day—before, the steering wheel shook violently, and there were creaking noises when shifting gears; now everything is smooth as new, with no body roll during cornering and much quicker handling response. More importantly, noise levels have significantly decreased, music is no longer interrupted, and long-distance driving is more comfortable. I consulted a professional opinion—it's common for old car rubber bushings to wear out, and timely replacement can prevent further wear on the suspension system, saving on major repair costs. Although the replacement cost was a bit high, compared to replacing parts on a new car, this investment is well worth it.

Was this review help?
13
2
Share
Expand All
DeHailey
12/13/25 8:36am

I feel that after replacing the suspension bushings, my old car has become safer and more reliable. Before the replacement, the car tended to wobble during braking, and the handling was unstable. Now, the overall feel is tighter, and there are far fewer heart-stopping moments while driving. As an average driver, my main concern is safety: worn-out bushings can lead to suspension deformation, and after replacement, the shock absorption improves, helping to avoid unexpected risks. If you're on a tight budget, prioritize replacing these critical components, combined with checking the brakes or tires, to maximize driving comfort and safety.

Was this review help?
10
5
Share
Expand All
More Forum Discussions

Why is the body of the Song Classic so heavy?

The reason for the heavy body of the Song Classic is that the Song Classic is an SUV model with a high chassis, which raises the center of gravity, thus making the entire vehicle heavier. The role of the car body: The main functions of the car body are to protect the driver and create a good aerodynamic environment. A good body not only enhances performance but also reflects the owner's personality. In terms of structure, car bodies are mainly divided into two types: body-on-frame and unibody. The impact of an overly heavy car body: The heavier the car, the more fuel is needed to drive it, and the greater the resistance the tires encounter. Therefore, the heavier the car, the more fuel it requires. Moreover, greater weight also necessitates a corresponding engine, and larger displacement engines consume more fuel.
8
3
Share

What is the fuel tank capacity of the 2012 Nissan Qashqai in liters?

2012 Nissan Qashqai has a fuel tank capacity of 65 liters. The vehicle is equipped with a 1.6L naturally aspirated engine and a luggage compartment capacity of 495-1780 liters. In the same class, the 2021 Tank 300 has a fuel tank capacity of 80 liters, powered by a 2.0L turbocharged engine with an 8-speed automatic transmission. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the dashboard, marked with E and F. When the pointer is near E, it indicates low fuel, and when it is close to F, it means the fuel level is sufficient.
16
4
Share

What are the steps for removing and installing the rear bumper of the 10th-generation Accord?

First, open the hood and remove the screws and clips on the bumper of the hood. Use a 10cm wrench to remove the screws and clips at the edges of the front bumper on both sides. Next, remove the clips at the bottom. Use a pointed screwdriver to pry up the center of the clips, then pull them out to remove. Some may also have screws, mostly Torx screws or screws requiring a 10cm wrench. Use the appropriate tools to remove them, then gently pull the sides outward by hand. If it doesn't budge, avoid forcing it. Check through the gap to see if there are any remaining screws that haven't been removed.
13
4
Share

What is the battery model of the Lynk & Co 01?

The Lynk & Co 01 uses an AGM battery with a specification of 12 volts. Precautions for battery use: Regularly check the electrolyte level. If it is below the minimum level mark, replenish it immediately. Continued use in this state will not only accelerate the aging of internal components, shortening the battery's lifespan, but may also cause an explosion. Keep the battery away from open flames and avoid causing sparks near the battery due to short circuits. When charging the battery, carefully read the warning labels on the battery and remove it from the machine. The battery's electrolyte, dilute sulfuric acid, is corrosive and should not come into direct contact. If electrolyte comes into contact with eyes, skin, or clothing, rinse thoroughly with clean water immediately. If electrolyte enters the eyes, seek medical treatment after rinsing with water. Perform regular maintenance and care for the battery. Battery replacement method: Open the engine hood, remove the red positive terminal of the battery, then remove the black negative terminal. Unscrew the battery's mounting screws and install the corresponding new battery. If the electrolyte is low, replenish with distilled water or a dedicated replenishing solution. During daily driving, frequently check if the small holes on the battery cover are ventilated, whether the battery's positive and negative terminals are oxidized, and if any parts of the circuit are aged or short-circuited, turn off the electrical devices.
18
3
Share

What are the models of Honda business vehicles?

Honda business vehicles include the Dongfeng Honda Elysion and the GAC Honda Odyssey. Both models are positioned as MPVs. Introduction to Elysion: The Elysion is an MPV model under Dongfeng Honda. Unlike the Odyssey, the Elysion has a stronger business-oriented appeal. Among Honda's vehicles, the Elysion's biggest selling point is its spacious performance. Additionally, its engine combines the advantages of low fuel consumption and strong power, making the later usage costs quite economical. This has made the Elysion one of the best-selling MPV models. Introduction to Odyssey: The Odyssey is the preferred choice for family cars, suitable for serving large families. Its design leans more towards a family-oriented feel, with a less intense business atmosphere. Thanks to Honda's MM concept, the Odyssey boasts excellent space performance. Moreover, its compact size prevents the vehicle from feeling bulky on narrow roads.
12
5
Share

How to Eliminate Brake System Malfunction in the Tenth-generation Accord?

Abnormalities in the brake system manifest as poor braking or failure, unilateral braking deviation, braking noise, and brake drum overheating caused by brake drag. ABS function failure can cause the brake fault light to illuminate. It is advisable to check if the vehicle's ABS function is abnormal. Severely worn or failed brake pads can also trigger the brake fault light. Inspect the brake pads for any abnormalities. Inferior or unsuitable brake fluid may cause the brake fault light to come on. Consider replacing the brake fluid.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.