What are the Dynasty Series models from BYD?

1 Answers
Stewart
07/29/25 5:52pm
BYD offers four car models named after Chinese dynasties: BYD Qin, BYD Song, BYD Yuan, and BYD Tang. BYD is a Chinese automotive brand established in 1995, primarily manufacturing business sedans, family cars, and batteries. The BYD Qin has body dimensions of 4675*1770*1500mm and is a 4-door, 5-seater sedan. It is equipped with a front-mounted single electric motor and a single-speed electric transmission. The BYD Song measures 4600*1830*1700mm and is a 5-door, 5-seater SUV. It comes with a turbocharged engine paired with either a 6-speed wet dual-clutch transmission or a 6-speed manual transmission. The BYD Yuan has body dimensions of 4360*1785*1650mm and is a 5-door, 5-seater SUV. It features either a naturally aspirated or turbocharged engine, mated to a 5-speed manual transmission or a 6-speed dry dual-clutch transmission. The BYD Tang measures 4870*1940*1720mm and is a 5-door, 7-seater SUV. It is powered by a turbocharged engine coupled with a 6-speed automatic transmission.
Was this review help?
17
0
Share
More Forum Discussions

What is the qualified light transmittance for car window films?

Car window films with a light transmittance of 70% or higher are considered qualified. These films are applied to the interior side of car windows, including the front windshield, rear windshield, side windows, and quarter windows. The steps for applying car window films are: 1. Place bath towels on the hood and dashboard; 2. Cover the seats with seat covers and secure them with cling film; 3. Thoroughly clean the glass; 4. Position the soft template over the window glass by sliding it into place, then cut the film according to the template. The functions of car window films include: 1. Blocking infrared heat to achieve heat insulation and sun protection; 2. Filtering out most UV rays to prevent skin damage and reduce aging of car interiors; 3. Preventing injuries to passengers from shattered glass in case of accidents; 4. Reducing the occurrence of accidents caused by glare.
2
1
Share

Where is the license plate 'Shaanxi S' from?

Shaanxi S is the license plate of the Shaanxi Military District. 'Shaan' represents Shaanxi Province, and the letter following 'Shaan' represents cities within Shaanxi Province. The license plate codes for other cities in Shaanxi Province are: Shaan B - Tongchuan City, Shaan C - Baoji City, Shaan D - Xianyang City, Shaan E - Weinan City, Shaan F - Hanzhong City, Shaan G - Ankang City, Shaan H - Shangluo City, Shaan J - Yan'an City, Shaan K - Yulin City, Shaan V - Yangling Agricultural Demonstration Zone. License plates are plates hung on the front and rear of vehicles, made of materials such as aluminum, sheet iron, plastic, or paper. License plates refer to vehicle registration plates, and their functions are: 1. To identify the region to which the vehicle belongs; 2. To trace the owner of the vehicle and its registration information based on the license plate.
9
2
Share

How Many Years is BMW's Warranty?

BMW offers different warranty periods for different series of models. The specific details are as follows: Examples: The official warranty period for the BMW M3 is 3 years or 100,000 kilometers, while the three-guarantee period for the entire vehicle is 2 years or 50,000 kilometers. The warranty period for the BMW 3 Series is 3 years, and the three-guarantee validity for the BMW X5 is 2 years or 50,000 kilometers, etc. Car Maintenance Tips: Body maintenance: Generally, it is also necessary to perform a series of maintenance on the car's body. Since the car's body is exposed to the air for long periods, it undergoes sun exposure, wind, and rain, which can cause some damage to the paint. Therefore, body maintenance should also be included during maintenance. Avoid excessive waxing: Some waxes contain alkaline substances, which can cause the car's surface to turn black over time and affect the body. Proper amount of antifreeze: When adding antifreeze to the car, do not fill it too much. The maximum level should be up to the top of the scale line.
17
1
Share

How to Cool Down a Car Exposed to Sunlight in Summer?

Methods to cool down a car exposed to sunlight in summer: 1. Open the doors for ventilation: After a car is exposed to sunlight in summer, it's best to first open the doors to allow air circulation, which helps the car gradually cool down. Once the interior is less stuffy, close the doors and turn on the air conditioning. It's also advisable to use a heat-insulating pad on the seats to avoid excessive heat. 2. Apply car glaze: To reduce the heat caused by UV rays, car manufacturers have developed a high-molecular UV-reflective paint care agent. Applying a layer of this agent on the car's surface in summer can help prevent the body from overheating and minimize UV damage. 3. Clean the radiator: When washing the car, remember to clean the radiator, as it tends to accumulate various impurities that hinder engine cooling. Cleaning the radiator is one way to help cool down the car. 4. Install a sunshade: Summer sunlight can heat up the car's interior. A sunshade can reflect sunlight and prevent direct exposure. Sunshades are typically placed on the front and rear windows. Using a sunshade can significantly lower the temperature of the seats and dashboard, making it an effective cooling method. 5. Park with windows slightly open: In summer, if a car is parked with all windows closed, the interior can become hotter than the outside temperature. To prevent this, leave a small gap (about the width of a finger) when parking to allow air circulation between the inside and outside, thereby reducing the interior temperature. Be cautious not to leave too large a gap to avoid theft of valuables. 6. Park in the shade: The primary reason a car gets hot is direct sunlight exposure. Whenever possible, park the car in a professional underground garage, under a tree, or in any other shaded area. This is the most effective way to prevent the car from overheating.
6
5
Share

How to Open the Trunk of Toyota Prado?

Toyota Prado trunk opening methods: Pull up the trunk switch located at the lower left corner of the driver's cabin or use the car key to open the trunk. Below is an introduction about Toyota Prado: 1. Overview: The Toyota Prado off-road vehicle is the latest model in the Toyota Land Cruiser (Land-Cruiser-Prado) series. This newly developed next-generation off-road vehicle is equipped with a newly developed Toyota six-cylinder electronic fuel injection 1GR-FEV6 engine, with a displacement of 3956cc, excellent power performance, and exhaust emissions that comply with the latest European Ш standard, making it highly environmentally friendly. 2. Models: Toyota Prado vehicle models include the 4.0L-V6-TX 2010 model, 4.0L-V6-TX-L 2010 model, 4.0L-V6-VX 2010 model, etc.
11
0
Share

What engine does the GM6 use?

GM6 car engine is jointly developed by SAIC Motor and General Motors, and is produced by SAIC's engine factory. The GM6 engine model is 18K4C, with a maximum power of 124kw, a maximum torque of 250Nm, a maximum power speed of 5500rpm, and a maximum torque speed of 170Nm. The GM6 engine can be maintained daily using the following methods: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid faults, change the oil regularly according to usage conditions and keep the oil volume moderate; When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it will burst the filter element or open the safety valve, allowing oil to pass through the bypass valve and bring contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking filters and oil holes, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine works properly but also extends the overall lifespan of the radiator and engine.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.