What are the driving techniques for automatic transmission cars?

How to Drive an Automatic Transmission Car on Continuous Downhill Slopes?

Before descending a slope, test whether the braking performance is good. If there are any faults, they should be resolved before descending. Use brakes cautiously on downhill sections. Do not turn the steering wheel sharply on downhill sections, as the inertia is high on downhill slopes, and improper use of the steering wheel at high speeds can easily cause the vehicle to overturn. Maintain a distance of more than 50 meters from the vehicle in front. If the slope is too long and the vehicle's inertia is significant, the distance between vehicles should be appropriately increased. When going downhill, never shift the gear to N (neutral) in a manual-automatic transmission car, as this can damage the transmission and make it difficult to control the speed.

9

2

Share

What to Do If Too Much Coolant Is Added?

If too much coolant is added, you can directly use a syringe to extract the excess coolant until the liquid level is below the maximum mark (MAX). Method for replacing coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipelines, with a particular focus on the five-way water pipe. The five-way pipe gets its name from having five connections to different parts of the car. Coolant flows through the five-way pipe and is then distributed to various parts of the vehicle to perform its function. If there is any leakage of coolant in this section, the water pipe should be replaced or the connections re-secured as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue to pour water into the reservoir, allowing it to flow continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out from the reservoir will have a faint pink color. Continue adding clean water until clear water flows out. Note: Don't forget to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose—this allows the coolant to flow quickly into the radiator. Then, add another bottle of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is expelled from the cooling system. Add more coolant until the level reaches the "MAX" mark on the reservoir.

7

3

Share

How to Adjust a Crooked Motorcycle Front End?

Remove the cover above the key. Some models also require removing the front cover to access the large nut, loosen it a few turns. There is also an adjustment nut on the shock absorber. Also loosen it a few turns, then straighten the direction and tighten the nuts. The above adjustment method is only applicable to vehicles where the front shock absorber and handlebar are not deformed.

16

0

Share

How to use 2021 XRV without navigation?

Owners can prioritize using mobile phone navigation as an alternative to in-car navigation, or purchase a dash cam with navigation functionality. Finally, owners can consider installing an aftermarket navigation system in their vehicle.

6

0

Share

How to Adjust the Headlight Height of the URV?

Stand directly in front of the headlight with your feet as close as possible to the headlight, observe the position of the high beam, and note it down. Then move vertically to the wall and mark the position of the light center based on your feet. Use a screwdriver to rotate the headlight's scale gear, ensuring the light center aligns with the marked position on the wall. The vertical distance should not exceed 10 centimeters. If there is no one else in the car while adjusting the headlights, you can slightly raise the light center, generally not exceeding 5 centimeters. If the light center does not move horizontally, don't worry. Continue turning the screwdriver firmly until the light center aligns with the marked position.

10

1

Share

How to use the Peugeot 408 manual-automatic transmission?

When driving a manual-automatic transmission car, you should switch to manual mode when driving on uphill or downhill sections. For manual-automatic transmission cars, since the manual mode requires stepping on the clutch, it is more convenient for the owner to switch to automatic mode when driving on flat roads. When overtaking, push from D gear to manual mode, then downshift twice in succession while maintaining the current throttle position. Generally, this provides stronger overtaking power. When driving on highways, the speed is usually high, but if there is frequent congestion, you can switch to manual mode to avoid excessive braking.

8

2

Share

What are the driving techniques for automatic transmission cars?

How to Drive an Automatic Transmission Car on Continuous Downhill Slopes?

What to Do If Too Much Coolant Is Added?

How to Adjust a Crooked Motorcycle Front End?

How to use 2021 XRV without navigation?

How to Adjust the Headlight Height of the URV?

How to use the Peugeot 408 manual-automatic transmission?

How to Choose Between BYD Han and Tang?

How to Tell if a Tire is Punctured?

How to Screen Mirror with a Phone in Haval H6?

How to Adjust Brake Pulling to the Left?