···
Log in / Register

What are the driving skills and precautions in foggy weather?

4 Answers
Figueiredo
07/29/25 5:06pm

Driving skills and precautions in foggy weather are: 1. Pay attention to speed and distance, drive at a low speed in fog, especially maintaining a sufficient safe distance from the vehicle in front, avoiding being too close; 2. Do not use high beams, turn on fog lights and low beams in foggy conditions, avoid using high beams as their elevated light can refract in the fog and easily shine into the eyes of oncoming drivers, blurring their vision; 3. Use the horn frequently, honk when meeting another vehicle to alert the opposite driver, and turn off fog lights to avoid dazzling the other driver; 4. After parking, the driver should stay away from the vehicle, if the fog is too heavy, park the car close to the roadside, turn on fog lights, low beams, and hazard lights, and all passengers should exit from the right side and leave the roadway.

Was this review help?
14
5
Share
Londyn
08/14/25 7:21am

When driving in fog, safety is my top priority. I always maintain a low speed, about 20 km/h slower than usual, to ensure I have enough reaction time when visibility is poor. Turning on the fog lights is a must, as high beams can reflect off the fog and make it even harder to see the road, which is dangerous. In terms of following distance, I keep at least two to three times the normal distance from the car ahead and avoid changing lanes hastily, as it’s easy to miss vehicles in blind spots in the fog. I regularly check my car’s lights and tire pressure to ensure good traction and avoid sudden braking that could cause skidding. If the fog is too heavy, I pull over in a safe area and wait for it to clear—never stopping on the highway shoulder due to the high risk of rear-end collisions. Keeping a small windshield wiper to clear fog or using the heater’s defrost function works even better. Developing these habits during regular maintenance can significantly reduce the risk of accidents.

Was this review help?
16
5
Share
Expand All
StArya
10/13/25 4:57am

Driving in foggy weather used to make me quite nervous, especially as a beginner. Now I've learned some techniques: always use low beam headlights combined with fog lights, and never risk using high beams. Maintain a speed 10-20 km/h below the speed limit, and keeping a safe distance is crucial—at least 50 meters. Avoid distractions like mobile phones inside the car, stay focused on the road, and brake or steer gently. If the fog gets too thick, turn on the wipers or activate the defogging mode of the air conditioning to clear water droplets from the windows for better visibility. Remember to use reflective items like warning signs as a precaution, and check tire wear to prevent skidding. By following these simple steps, driving becomes much safer and helps avoid fatigue.

Was this review help?
7
4
Share
Expand All
StArthur
11/26/25 5:56am

I think the key to driving in foggy conditions lies in lighting and speed management. Proper use of front and rear fog lights can improve visibility, but avoid using high beams as they can cause reflections and worsen the blur. Speed should be significantly reduced, adhering to the recommended speeds on traffic signs. Maintaining sufficient distance is crucial for safety—keep at least a 4-5 second gap to prevent sudden stops by the vehicle ahead. Avoid sudden braking or frequent lane changes, as they can lead to loss of control. Turn on the air conditioning defogging function to prevent windshield fogging from affecting visibility. Regularly check the vehicle's lighting system to ensure it functions properly. On foggy days, avoid using cruise control; manual driving is more flexible and safer.

Was this review help?
11
3
Share
Expand All
More Forum Discussions

What Causes a Motorcycle to Have Unstable Firing with a 'Tututu' Sound?

When a motorcycle only makes a 'tututu' sound but fails to start during ignition, there are several potential causes to consider. It is necessary to separately check whether the spark plug is faulty, whether there is a misfire or the high voltage is too weak, whether the gasoline is of poor quality, whether the carburetor is clogged (clean the carburetor), and whether the carburetor's air-fuel mixture ratio is improperly adjusted. Additionally, check whether the choke is used incorrectly or has issues preventing the enrichment of the mixture, whether the valve clearance is too small or the valves are not sealing properly, whether there is a flooded cylinder, whether the cylinder pressure is too low, whether there is slight air leakage in the intake pipe or other rubber hoses, and whether the valve timing is incorrect. Any of these issues could lead to this type of malfunction.
8
4
Share

Which Vehicles Are Exempt from Toll Charges on Highways?

Vehicles exempt from toll charges on highways include micro buses, sedans, small buses, small off-road vehicles with 7 seats or fewer, as well as motorcycles permitted to travel on regular toll roads. Below is an introduction to highways: 1. Overview: Highways are classified as high-grade roads, commonly referred to as expressways. 2. Requirements: According to the "Technical Standards for Highway Engineering" by the Ministry of Transport of China, highways are defined as "roads capable of accommodating an average annual daily traffic volume of over 25,000 small passenger vehicles, exclusively designed for high-speed divided-lane travel, with fully controlled access." 3. Development: Although different countries have varying names for highways, they all specifically refer to roads with at least four lanes, separated directional traffic, fully controlled access points, and entirely grade-separated interchanges. Additionally, many countries also classify direct trunk roads with partially controlled access and not entirely grade-separated interchanges as highways.
13
3
Share

Where is the cabin air filter located on the BMW 525Li?

The cabin air filter of the BMW 525Li is located in the engine compartment, adjacent to the engine hood support rod, and can be seen upon opening the hood. Below is relevant information about the cabin air filter: 1. The cabin air filter purifies air entering the vehicle interior from outside, improving air cleanliness. It typically filters impurities in the air, including microscopic particles, pollen, bacteria, industrial exhaust, and dust, preventing them from entering the air conditioning system and causing damage. It protects the health of vehicle occupants and prevents window fogging. 2. A high-quality cabin air filter can absorb fine particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, enhance driving comfort, and protect the air conditioning cooling system. There are two types of cabin air filters: one without activated carbon and another with activated carbon. The activated carbon cabin air filter not only performs the above functions but also absorbs a significant amount of odors. The general replacement interval for the cabin air filter is every 10,000 kilometers.
20
2
Share

What is the displacement of 60tfsi?

According to the manufacturer's model information, the imported Audi A8L-60-TFSI model has a displacement of 4.0T and a maximum horsepower of 435hp. Here is some extended information: 1. Audi A8L market: The Audi A8L is a car produced by Volkswagen Group of Germany. It is the most high-end luxury car in the Audi lineup, featuring an all-aluminum body with a top speed of 250km/h, positioned to compete with the Mercedes S600 and BMW 7 Series. Currently, there are three models available, all equipped with V6 spark plugs and 5 valves per cylinder. 2. Audi A8L exterior: The all-aluminum body frame structure (ASF) and permanent all-wheel drive quattro are unique technologies of Audi. ASF technology can reduce the vehicle weight by 50% while increasing strength by 60%. Quattro technology can improve the car's off-road capability and stability. The Audi A8L, which combines these two 'unique skills,' can be called the pride of the luxury car lineup.
18
3
Share

On which days of the week is Subject 4 usually taken?

It can be scheduled from Monday to Friday, depending on the appointment time. Relevant details are as follows: 1. Exam content: Subject 4, also known as the Subject 4 theoretical exam or driver theory test, is part of the motor vehicle driver's license assessment. After the implementation of the Ministry of Public Security's Order No. 123, the Subject 3 exam was divided into two parts: besides the road test, a safe and civilized driving test was added, commonly referred to as "Subject 4," which evaluates "driving ethics." Since this test is conducted after Subject 3, it is commonly called the Subject 4 exam. However, there is no official term "Subject 4" in the actual regulations. 2. Exam format: The test paper consists of 50 questions, mainly in the form of case studies, images, animations, etc. The total score is 100, with a passing score of 90.
14
5
Share

Can Improper Gear Shifting Damage the Transmission Gears of a Motorcycle?

Yes, shifting gears on a motorcycle without pulling the clutch can cause jerking sensations, gear grinding, and in severe cases, damage the transmission. While riding at high speeds, you can shift gears without using the clutch, but this is only applicable during acceleration. When decelerating, the clutch must be used to avoid damaging the transmission. Transmission gears operate under conditions of high speed, high load, and constantly alternating speed and load. Apart from normal wear, factors such as poor-quality lubricating oil, inadequate lubrication, improper driving techniques, incorrect gear assembly during maintenance (leading to improper meshing), gear impacts, poor tooth meshing, and shaking during startup can all accelerate gear wear and damage. Additionally, wear in other parts of the gear or related components (such as spline grooves in gear holes, bearings, or spline shafts), deformation (e.g., wear or deformation of transmission housing bearing seats, bending of spline shafts), improper assembly of the clutch or drive shaft, and manufacturing defects (like uneven carburization or gear warping) can also hasten gear wear.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.