···
Log in / Register

What are the driving modes of the 2021 Beijing Hyundai ix35?

3 Answers
MacLawson
09/03/25 3:05am
2021 Beijing Hyundai ix35 has four driving modes, namely Sport, ECO, Standard, and Comfort modes. Simply press the "DRIVE MODE" button near the gearshift to switch between these four modes. Sport Mode: By increasing engine speed or quickly downshifting, the vehicle can instantly unleash greater power, with a more aggressive shift logic. The vehicle has high torque output during the starting phase, and delayed upshifting increases the duration of high torque. During acceleration, there is a strong sensation of being pushed back. If the engine has been used for a long time, Sport Mode can also help clear carbon deposits. However, prolonged use of this mode will lead to increased fuel consumption and more severe mechanical wear on the engine and transmission. ECO Mode: This is a more economical and fuel-efficient driving method, suitable for daily commuting. In this mode, the car's fuel injection volume and transmission control module are managed by the computer, which adjusts to the most energy-efficient driving style. This mode offers the lowest fuel consumption but also the least power. Additionally, in this mode, due to the transmission control module being managed by the computer, the throttle response is less sensitive, and the engine response is slower. Standard Mode: In Standard Mode, the car's throttle response is balanced, offering a simpler and more comfortable driving experience. The vehicle's performance tends to be balanced, suitable for most road conditions, and provides a good driving experience. Comfort Mode: Comfort Mode adjusts the suspension to a softer setting, makes the steering wheel more responsive, and keeps the engine speed within a lower range. For example, when passing over speed bumps or braking suddenly, it can enhance the comfort level by one notch.
Was this review help?
7
2
Share
Louis
09/15/25 4:50am
As a housewife who drives frequently, I've always relied on the driving modes of my 2021 ix35. It mainly has three modes: Normal mode, Eco mode, and Sport mode. Normal is my most frequently used mode, suitable for daily commutes or picking up the kids, with stable power response and balanced fuel consumption. Eco mode is super fuel-efficient, especially in city traffic jams, saving a lot on gas money—though the acceleration is a bit slower, it makes commuting very comfortable. Sport mode offers strong power, making uphill climbs or highway driving effortless, but it consumes more fuel, so I only turn it on occasionally for weekend trips. I find the mode switching simple via the center console button, and it can be combined with transmission settings; I also pay attention to regular vehicle maintenance, such as periodic checks on the engine and tires, to ensure smooth mode switching without affecting driving safety, which helps prolong the car's lifespan. Choosing the right mode is very helpful for family budgets, avoiding unnecessary repair costs.
Was this review help?
13
1
Share
Expand All
SanLeo
10/29/25 5:29am
The driving mode selection in this car is fantastic! Ever since I started driving, I've loved switching modes. The 2021 ix35 offers three modes: Normal, Eco, and Sport, plus a hidden Smart mode that adjusts automatically. Sport mode is my favorite—throttle response is super quick, making cornering or overtaking on highways incredibly thrilling and adding more fun to driving. Eco mode is too sluggish but works well for saving fuel in traffic or slow city driving. Normal mode strikes a balance, making daily commutes easy and relaxed. Switching modes is effortless with the rotary knob, but remember to optimize based on driving habits—like not keeping Sport mode on all the time, or you'll burn through fuel. A handy tip is to adjust modes based on weather and road conditions: try Sport on sunny days and stick to Normal for safer driving in the rain. The gear-shifting logic adapts to each mode—nothing flashy but practical, even for beginners to pick up quickly.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What do M+ and M- mean in a car?

M stands for Manual, indicating the manual gear shifting mode. Generally, the + and - signs on an M-gear transmission mean shifting gears by pushing the gear lever forward or backward or using the steering wheel paddle shifters. Below are the technical requirements for gear shifting: 1. Timely: Master the appropriate gear shifting timing, meaning neither upshifting too early nor downshifting too late. 2. Correct: The coordination of the clutch pedal, accelerator pedal, and gear lever should be accurate and harmonious, with precise positioning. 3. Smooth: After shifting into a new gear, release the clutch pedal promptly and smoothly. 4. Swift: The action should be quick to shorten the gear shifting time, reduce the loss of the car's kinetic energy, and lower fuel consumption.
6
5
Share

Can You Start the Engine If Water Enters the Exhaust Pipe?

If only a small amount of water enters the exhaust pipe, you can still start the engine; however, if a large amount of water enters the exhaust pipe, it is advisable not to start the engine. A significant amount of water in the exhaust pipe can cause the engine to stall. If you attempt to start the engine under such conditions, it may lead to deformation of the engine connecting rod or even cylinder puncture. The exhaust pipe is a device designed to reduce vibration and noise, facilitate installation, and extend the lifespan of the exhaust muffler system. It is installed between the engine exhaust manifold and the muffler, providing a flexible connection for the entire exhaust system. Exhaust pipes are primarily used in light vehicles, compact cars, buses, motorcycles, and similar vehicles.
7
2
Share

Where is the thermostat located on the Chery Tiggo 3?

The thermostat of the Chery Tiggo 3 is located at the upper water outlet of the engine. The car thermostat is a valve that controls the flow path of the engine coolant. It automatically adjusts the amount of water entering the radiator based on the coolant temperature to ensure the engine operates within an appropriate temperature range, which can help save energy. The Chery Tiggo 3 is a compact SUV launched by Chery Automobile, with dimensions of 4420mm in length, 1760mm in width, and 1670mm in height, and a wheelbase of 2510mm. It is equipped with a 1.5L naturally aspirated engine with a maximum power of 85kw, paired with a 5-speed manual transmission.
13
2
Share

How to Install the Rear Camera of a Dash Cam?

Installation method for the rear camera of a dash cam: 1. Plug in the rear camera connector and the power supply on the cigarette lighter, then check if both front and rear cameras are functioning properly; 2. After confirming everything is correct, start routing the wires; 3. Tuck the wires into the plastic panel above and connect them to the fuse box; 4. Use a trim tool to guide the rear camera wire to the rear windshield and remove the panel above the rear glass; 5. Pull the wire through the hole and install the camera in the position of the removed panel. A dash cam is a device that records images, sounds, and related information during vehicle travel. After installing a dash cam, it can record the entire driving process in video and audio, providing evidence for traffic accidents.
12
5
Share

What to Do When a Sunroof Leaks into the Car?

Here are the causes and solutions for a car sunroof leaking: 1. The sunroof drain is clogged with debris: This prevents water from draining, causing it to seep into the car. Clear the sunroof's drainage channel or use a towel to clean the drain outlet, ensuring water drains properly to the ground. 2. Damaged sunroof seal: This causes poor edge sealing, allowing water to enter the car. Replace the sunroof seal with a new one. 3. Gaps in the sunroof frame: Apply sealant to the sunroof frame. If the vehicle is under warranty, the most straightforward solution is to replace the sunroof frame, which typically takes a professional technician about three days.
16
3
Share

How to Check the Car Model?

Methods to check the car model: You can look at the vehicle identification plate, which details the manufacturing date, engine displacement, power (kW), and other parameters. The location of the vehicle identification plate varies by car but is generally found on the lower part of the passenger side door; opening the door will reveal it. The car model is a unique identifier assigned to a class of vehicles, consisting of pinyin letters and Arabic numerals. According to national standards, the model of a domestically produced car should indicate the manufacturer, type, and key characteristic parameters. The vehicle identification plate is a tag that displays the basic features of the vehicle, including the manufacturer, model, engine power, total weight, load capacity or passenger capacity, manufacturing number, production date, and manufacturer's name.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.