What are the drawbacks of replacing 185 tires with 195 tires?

1 Answers
EverlyLee
07/25/25 4:35pm
The drawbacks of replacing 185 tires with 195 tires include increased fuel consumption, higher risk of rollover, and abnormal operation of the vehicle system. Below are the detailed explanations: Increased fuel consumption: The increased rolling resistance makes the steering wheel heavier during driving, leading to higher tire noise and fuel consumption. Higher risk of rollover: It interferes with the geometric dimensions designed for the body and suspension, significantly increasing the turning radius. This makes the vehicle more prone to rollover, especially during sharp turns, as the centrifugal force from the car's tilt can lift the inner wheels off the ground. Abnormal operation of the vehicle system: It can alter driving data, causing abnormalities in the vehicle system. For example, ABS, ESP, mileage, and fuel consumption are calculated based on the original tire's outer diameter. Replacing the tires without the system being able to make correct judgments can affect driving performance.
Was this review help?
4
3
Share
More Forum Discussions

How to Activate One-Touch Window Lift for Volkswagen Santana?

The method to activate the one-touch window lift for Volkswagen Santana is: 1. Start the vehicle and press the window button to the second position; 2. Press the window switch all the way down; 3. Pull the button up to raise the glass to the top and hold for 5 seconds. One-touch window lift refers to a system where the car window glass can be controlled to rise or fall into place with a single press. Taking the 2021 Volkswagen Santana as an example, it is a compact car with body dimensions of 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm. The 2021 Volkswagen Santana is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112ps and a maximum power of 82kw. It uses a MacPherson strut independent suspension at the front and a compound torsion beam non-independent suspension at the rear.
9
1
Share

What is the reason for insufficient air pressure after stepping on the brakes several times?

The reason for insufficient air pressure after stepping on the brakes several times is a problem with the brake valve. Problems with the brake valve: When the vehicle's air reservoir cannot store enough compressed air, the brake valve's air supply is insufficient; air leaks in the brake valve pipeline or blockages in the air circuit can both result in insufficient compressed air pressure generated by the braking system during braking. Braking with air pressure: During air pressure braking, when the driver steps on the brake pedal, the brake control valve opens, connecting the passage from the air reservoir to the brake chamber. This allows the compressed air in the air reservoir to enter the brake chamber through the brake control valve. Sufficient air pressure pushes the brake chamber push rod outward, driving the brake adjustment arm to rotate the cam. The rotation of the cam causes the brake shoes to expand and press against the brake drum, thereby braking the wheel. If the pressure is insufficient, it cannot push the chamber push rod outward to expand the brake shoes and press them against the brake drum, thus failing to brake the wheel.
3
3
Share

Will parking at an angle fail the test?

Parking at an angle will not fail the test. The following are precautions for parking by the roadside: Reduce speed: When you hear the system voice prompt to park by the roadside ahead, slow down in advance, preferably to below 10km/h, and shift to first gear. The slower the speed, the more beneficial it is for the subsequent operations. Turn on the right turn signal: Keep the right turn signal on for more than three seconds. If the signal turns off during the operation, make sure to turn it on again promptly; otherwise, points will be deducted. Observe road conditions: Check the surroundings through the rearview mirrors to see if there are suitable conditions for parking. If there are many vehicles, control your speed. Note that if there is an intersection ahead or a no-parking sign, you should pass that area before finding a suitable spot. Post-parking precautions: After parking, shift to neutral, pull the handbrake, and do not release it until you hear the voice prompt indicating that you have passed the test. Confirm roadside safety before exiting the vehicle: Before getting out of the car, check the left rearview mirror to ensure there are no approaching vehicles from behind, and exit only when it is safe to do so.
1
0
Share

How to Remove Adhesive Residue from Car Window Tinting Film?

The methods to remove adhesive residue from car window tinting film are: 1. Use a cotton swab to apply vinegar to the residual adhesive. After the vinegar dissolves the adhesive, wipe it clean with a cloth; 2. Apply essential balm to the adhesive and scrape it off with a blade; 3. Evenly apply alcohol to the residual adhesive. Once the adhesive is softened by the alcohol, wipe it away; 4. Spray a specialized heat-insulating cleaner onto the residual adhesive to dissolve it, then wipe it clean with a cloth. The functions of car window tinting film include: 1. Blocking a significant amount of heat generated by infrared rays; 2. Filtering out some ultraviolet rays to protect the skin and reduce the aging of car interiors; 3. Strengthening the glass to prevent injuries to passengers in case of accidental glass breakage. Car window tinting film is a thin layer applied to the front and rear windshields, side windows, and sunroof of a vehicle. This layer is called solar film or heat-insulating film.
15
3
Share

What is the following distance when driving below 100 km/h on the highway?

When driving on the highway at speeds below 100 km/h, the distance between your vehicle and the one in front in the same lane can be appropriately reduced, but the minimum distance must not be less than 50 meters. Below is relevant information about following distances: Road speed limit requirements: According to traffic experts, speed limits are primarily set based on the road environment and traffic flow needs. For example, some suburban roads may only have two lanes in each direction but allow speeds up to 70 km/h; in urban areas, some roads may have eight wide lanes but are densely populated with inconvenient traffic, likely resulting in speed limits of 40 km/h or 60 km/h. Different speed limits for different road sections: Even on the same highway, speed limits can vary for different sections, especially on sharp curves, slopes, tunnels, bridges, ramps, and construction zones. These limits may be adjusted and can change based on actual conditions. Generally, the maximum speed limit for passenger cars on highways is 120 km/h, but due to factors like road environment in the actual design and construction of highways, speed limits can range from 80 km/h to 120 km/h.
2
5
Share

Should You Use the Clutch or Brake to Control Speed in First Gear?

When controlling speed in first gear, you should use the brake. Below is a related introduction about gear positions: Concept: Gear positions are adjustment devices that regulate the speed and traction (torque) of a car. The lower the gear, the slower the speed, but the greater the car's traction (torque). The higher the gear, the faster the speed, and the smaller the car's traction (torque). Gear positions are generally divided into two main categories: forward gears and reverse gear. Engaging a forward gear makes the car move forward, while engaging the reverse gear makes the car move backward. Common car gear positions: Typically, a standard car has five forward gears and one reverse gear. The first forward gear is the starting gear, where the speed is the slowest (0-10 km/h), but the torque is the highest. Applications of each gear: First gear is also suitable for climbing steep slopes. After starting, when the engine speed reaches around 2000 rpm, shift to second gear, which is suitable for low-speed urban driving and climbing gentle slopes. Similarly, shift to the next gear when the speed reaches around 2000 rpm. The fourth and fifth forward gears are high-speed gears, suitable for driving on highways with good road conditions.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.