What are the disassembly steps for the Haval H6 transmission?

1 Answers
SarahLynn
08/26/25 4:28am
Haval H6 transmission disassembly steps: 1. First, remove the front subframe, then disconnect the connection between the engine and the transmission. 2. Remove the transmission and proceed with its disassembly. The detailed disassembly steps are as follows: 1. The H6 is a transverse engine model, where both the engine and transmission are mounted on the subframe. Therefore, before disassembling the transmission, the front subframe must be removed first, and then use professional tools to support the engine oil pan. 2. After removing the subframe, locate the connection between the engine and the transmission, remove the screws, and then the transmission can be taken out separately. Once the transmission is removed, place it on a workbench and use specialized tools to disassemble the transmission screws one by one, which will allow the transmission to be taken apart. 3. During the disassembly process, a lot of fluid may leak out, so prepare towels in advance. The transmission is a crucial component of a vehicle, enabling the car to meet power demands under different operating conditions and allowing functions like reversing and idling. Without a transmission, the car cannot operate normally. When disassembling an automatic transmission, be cautious as it contains complex control mechanisms that need to be protected.
Was this review help?
8
5
Share
More Forum Discussions

Can the starter of Honda CRV be removed without dismantling the intake pipe?

Honda CRV's starter cannot be removed without dismantling the intake pipe. Definition of the starter: The car starter is a crucial component for starting the engine. It rotates by drawing power from the battery, thereby driving the engine's crankshaft to start the engine. Conditions requiring replacement: Generally, the starter of a car is highly durable. The most common reason for replacing a starter is after the vehicle has been driven for a long time, the carbon brushes inside the starter wear out too short due to frequent starts, making it impossible to start even after adjustments; another common issue is severe wear of the engagement gear, leading to starter damage and failure to start.
10
5
Share

What is the engine oil specification for the Geely King Kong manual?

Geely King Kong's dedicated engine oil specification is SJ-10w-30. Oil introduction: 5w represents low-temperature resistance down to -30°C (calculated as 5-35=-30. For example, 0w40 would be 0-35=-35°C). The number 40 represents high-temperature viscosity, determining oil film strength and lubricant thickness. Oil selection method: Based on China's climate conditions, all-season oil can be chosen for most regions, suitable for both winter and summer. All-season oil grades include: 5W/20, 5W/30, 5W/40, 5W/50, etc. The smaller the winter number, the better the low-temperature performance; the larger the summer number, the higher the viscosity and the wider the applicable temperature range.
4
2
Share

Why doesn't the Nissan Sylphy automatic transmission shift gears?

Nissan Sylphy automatic transmission not shifting gears may be due to the following reasons: Engine malfunction: Slight shifting impact may be normal, but if the impact is more noticeable, it is recommended to check the engine's working condition at a repair station and then inspect whether there is a fault in the transmission. Oil passage blockage: If the transmission oil is inadequate or the oil passage is blocked, the pressure in the hydraulic cylinder cannot rise, making gear shifting impossible. Normally, the oil should be changed every 60,000 kilometers, preferably using a circulating machine. Another point to mention: especially for some older cars, even if the oil has been changed as required, if the transmission oil pan has never been removed, the filter screen and filter element inside may be completely blocked, which can also lead to insufficient hydraulic pressure. It is recommended to remove the transmission oil pan of older cars to check its condition.
14
2
Share

Why can't the new Mondeo start?

The new Mondeo cannot start, possibly due to battery issues, a blown starter fuse, or problems with the dashboard. Below are detailed explanations: Battery issues: For example, the battery may have reached the end of its lifespan, the battery terminals may be loose or have poor contact, or the terminals may be oxidized. You can first press the horn to see if it sounds. If the horn is loud, the battery is fine; if the horn does not sound or is very weak, it indicates the battery is low on charge. Blown starter fuse: The ignition coil will lose power and won't spark, naturally preventing the car from starting. Dashboard problems: If all the dashboard indicator lights do not come on and the car shuts off immediately after starting, it is likely a dashboard issue, with the most common cause being a damaged dashboard CPU.
15
3
Share

How many liters of engine oil should be added to a Volkswagen Sagitar?

Volkswagen Sagitar requires 4 liters of engine oil. The method for adding engine oil: Reinsert the oil dipstick into the dipstick tube, then pull it out again to check the oil mark on the dipstick. Under normal circumstances, the oil mark should be between the upper and lower marks on the dipstick, slightly above the middle line. If the oil mark is below the lower mark, it indicates insufficient oil and should be topped up immediately. While adding oil, continuously pull out the dipstick to monitor the oil level. Hazards of excessive engine oil: If there is too much engine oil, it can enter the combustion chamber through the gap between the cylinder and piston, where it burns and forms carbon deposits. Excessive carbon deposits can easily cause engine knocking. Additionally, too much engine oil increases the movement resistance of the crankshaft and connecting rod, leading to higher fuel consumption.
6
5
Share

What is the optimal mileage for the first maintenance of the Teana?

The first maintenance for the Teana is most suitable at 5,000 kilometers. Concept of first maintenance: The first maintenance refers to the initial service of a car. It is performed at the end of the car's break-in period. The first maintenance is relatively simple, requiring only the replacement of engine oil, oil filter, and air filter. Engine oil is crucial for the engine, as it not only lubricates but also cleans, seals, buffers, prevents rust, and dissipates heat. Benefits of car maintenance: Ensures the vehicle remains in excellent performance condition. Enhances vehicle efficiency and reduces wear on parts and tires. Increases driving safety. Prevents potential hazards caused by vehicle issues. Helps reduce noise and environmental pollution. Maintains the vehicle's appearance and prevents damage.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.