What are the disadvantages of inflating car tires with nitrogen?

1 Answers
VanIsaac
07/29/25 7:59pm
Inflating car tires with nitrogen has the following disadvantages: 1. Oxygen residue: Under normal circumstances, car tires are inflated with air, and the nitrogen content in the air accounts for about 78%. Therefore, when inflating tires with nitrogen, the residual air will also make the nitrogen impure. The best practice is to vacuum the tires, but it is usually impossible to achieve a 100% vacuum, so there is still a very small amount of oxygen residue (1-2%). Correspondingly, the oxygen content in the tire needs to be reduced to about 2-3% to achieve a balance of partial pressure inside and outside the tire. Therefore, in reality, the purity of nitrogen required for tire inflation can only reach 95-98%. 2. Damage to the tire: During the vacuum process, the tire often deforms due to the vacuum. Those familiar with tires know that when vacuumed, the various structural layers of the tire, as well as the fabric and steel wires, will also deform, which may cause structural layer delamination and fabric or steel wire breakage. In other words, inflating with nitrogen can directly cause damage to the tire.
Was this review help?
11
0
Share
More Forum Discussions

How to Reset the Tire Pressure Light on an Older BMW X5?

After adjusting the tire pressure, start the car and navigate to the maintenance interface in the I-Drive system, then press the second option. The screen will prompt: Please ensure the vehicle's engine is running and the car is stationary. Wait patiently for several tens of seconds, and the tire pressure light will be reset.
20
5
Share

How to Adjust the Headrest on an Older BMW 5 Series?

Sit in the car and lean back slightly to find a comfortable seating position. Using the adjustment button, align the softest part of the headrest to the back of your head, ensuring it is level with your head. Press the button located next to the two support rods of the seat headrest or on the side of the headrest to adjust the height up or down.
20
4
Share

How to Open the Sunroof on an Older Audi A6?

The panoramic sunroof glass and sunshade can only be operated when the power mode is set to ON. Press the sunroof switch button once to automatically open the sunroof. During automatic opening or closing, a brief press of the switch will stop it at the current position. Pull and hold the switch backward, then release it when the desired position is reached. Push and hold the switch to start moving the sunroof glass, and release it when the appropriate position is achieved.
10
3
Share

How to reset the tire pressure warning on an older BMW X1?

Press the OK button on the left side of the steering wheel and the right button to navigate to the maintenance interface, then press the downward arrow button on the steering wheel to access the tire pressure interface. Wait until the instrument panel displays the message 'Run-flat indicator activated', then press the OK button on the steering wheel to confirm. The instrument panel will indicate whether the tire pressure is normal. Press the arrow button to select 'Yes' and then press the OK button to confirm.
7
2
Share

How to connect Bluetooth in an old Audi A5?

First, enable the Bluetooth function on both your mobile phone and the car's Bluetooth device. Then, set your phone's Bluetooth to "Visible to All" or to a mode where it can be detected. Search for Bluetooth devices on your phone and select the appropriate one to pair and connect. Enter the dedicated passcode to complete the connection. If the Bluetooth has been paired before, the system will automatically reconnect the Bluetooth when it is turned on again. Once the pairing is completed, the Bluetooth connection will be successfully established.
12
5
Share

How to set the time on the dashboard of an older smart car?

The dashboard has a time reset button on the right side, located on the small raised knob on the dial. Press it briefly to switch between time and mileage. When the time is displayed, press and hold for 3 seconds. Wait until the hour display flashes, then press briefly to adjust the hour. Press and hold for 3 seconds again, and the minute display will flash. Press briefly to adjust the minutes. Press and hold for 3 seconds once more or do nothing to return to normal time display.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.