What are the disadvantages of car color change film?

1 Answers
StRyder
07/30/25 5:34am
The disadvantages of car color change film are: 1. Difficult to remove adhesive, damaging the paint: Low-quality color change films use inferior adhesives, leaving residue on the car paint that is hard to clean, not only failing to protect the original paint but also corroding it; 2. Wrinkling and peeling: Due to the poor stability of the materials used in low-quality color change films, they start to wrinkle and peel quickly; 3. Fading: Low-quality color change films are made with inferior materials, resulting in poor color brightness and durability, making them prone to fading. The advantages of car color change film: 1. Changing the car's color or adding decals without damaging the original paint; 2. Compared to a full repaint, color change film is easier to apply, offers better protection for the car's integrity, provides more flexibility in color matching, and avoids color mismatch issues between different parts; 3. If you want to restore the original paint, simply remove the film.
Was this review help?
17
4
Share
More Forum Discussions

What does AFW transmission fluid mean?

Aisin AFW6 is a type of transmission fluid, which is a lubricant used to maintain the cleanliness of the gear system. It ensures the proper functioning of the transmission and extends the lifespan of the transmission components. Depending on the structure of the transmission, transmission fluids are categorized into automatic transmission fluid (ATF) and manual transmission fluid (MTF). Below are some details about transmission fluid: 1. Transmission fluid is typically replaced every approximately 40,000 kilometers, as it can deteriorate and evaporate under high-speed and high-temperature conditions over time. 2. Failure to replace the transmission fluid can accelerate the wear and tear of mechanical components. Transmission fluid provides effective lubrication even in low-temperature conditions and reduces fluid loss under harsh operating conditions.
8
4
Share

What Causes Intermittent Engine Shaking?

Engine intermittent shaking can be attributed to the following reasons: 1. Engine intake pipe leakage: The intake system contains numerous intake manifolds or valves. Any leakage can allow unintended gases to enter, causing the air-fuel mixture concentration in the intake manifold to become either too high or too low, ultimately leading to intermittent engine shaking or weak performance during idle. 2. Fuel system blockage or malfunction: Blockages in the fuel tank vent hole, fuel tank switch, fuel filter, or fuel lines between the tank and carburetor can prevent the engine from receiving the required fuel supply during idle. This results in a lean air-fuel mixture, weakened engine power output, and idle shaking. 3. Idle control valve failure: In fuel-injected engines, idle operation is primarily controlled by the idle control valve. The ECU adjusts the valve opening based on signals such as engine speed, temperature, and throttle position to maintain stable idle. If the valve malfunctions, it disrupts air distribution, causing uneven engine power during idle and resulting in vehicle shaking. 4. Engine carbon buildup: Carbon deposits in critical areas such as cylinders, throttle body, spark plugs, and intake valves directly impact engine power output. Excessive carbon buildup reduces ignition efficiency and intake air flow, leading to unstable engine power, idle shaking, and poor acceleration.
19
3
Share

What are the differences between China 5 and China 6 vehicle emission standards?

China 5 and China 6 vehicle emission standards differ in the following aspects: 1. Different carbon monoxide emission levels: China 5 allows 1,000 mg of carbon monoxide emissions; China 6 permits 700 mg. 2. Different emission limits: China 5 has an emission limit of 0.0045 grams per kilometer; China 6's limit is 0.25 grams per kilometer. 3. Different issuing authorities: China 5 was issued by the Ministry of Environmental Protection; China 6 was jointly issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine. 4. Different letter representations: China 5 is denoted by V; China 6 is represented by VI.
11
0
Share

What does it mean when the warning light comes on?

The reasons for the warning light coming on are: 1. Engine oil indicator light: If this light stays on, it indicates that the engine may have a fault; 2. Battery indicator light: This means there is an issue with the battery and it needs to be replaced; 3. Water temperature indicator light: This indicates that the coolant temperature is too high, and the vehicle should be stopped immediately until the temperature returns to normal and the light goes off; 4. Brake pad indicator light: If this light comes on, it means the brake pads are faulty or excessively worn. If any of these warning lights come on while driving, the owner should identify the problem and immediately go to an auto 4S shop for inspection and repair.
3
1
Share

How to Deal with Wiper Blades Not Cleaning Properly?

Methods to address wiper blades not cleaning properly: 1. Remove both wiper blades; 2. Purchase a sheet of water sandpaper and tear it into small pieces, using one piece at a time; 3. Use an appropriate container to hold water, then soak the wiper blades and water sandpaper in it; 4. Sand the rubber strips of the wiper blades with the water sandpaper, paying attention to sanding both sides as well as the front of the rubber strips appropriately. The process doesn’t need to be very long, about 5 minutes is sufficient. Wiper blades, also known as windshield wipers, are devices used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety.
19
1
Share

What kind of mirror is a car's rearview mirror?

Car rearview mirrors are convex mirrors, which have a light-dispersing effect, providing a wider field of vision compared to flat mirrors and enhancing safety. Rearview mirrors can be categorized by installation location into: exterior rearview mirrors, lower rearview mirrors, and interior rearview mirrors. By purpose, the exterior rearview mirrors show the rear sides of the car, the lower rearview mirrors display the area in front and below the car, and the interior rearview mirrors reflect the rear of the car and the interior conditions. The functions of car rearview mirrors include: 1. Observing passengers in the back seat through the central rearview mirror, especially when there are children; 2. Estimating the distance between vehicles via the central rearview mirror—when the rear car's front wheels are just visible in the mirror, the distance is about 13 meters; when the grille is visible, it's approximately 6 meters; and when the grille is just out of sight, the distance is about 4 meters.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.