···
Log in / Register

What are the dimensions of the XT5?

4 Answers
TuckerAnn
07/29/25 3:06pm

The Cadillac XT5 has a body length of 4812mm, width of 1903mm, height of 1680mm, and a wheelbase of 2857mm. Below are the specific details of the Cadillac XT5: 1. Vehicle Positioning: The Cadillac XT5 is positioned as a midsize SUV, with both front and rear light clusters featuring a unified vertical stripe design. 2. Configuration: Only the top trim comes with an 8-inch color instrument panel, while an 8-inch touchscreen is standard. However, features are skewed towards mid and high trims, including GPS navigation, traffic information display, car networking, and OTA upgrades. 3. Powertrain: The Cadillac XT5 is equipped with a standard 2.0T high-performance engine across all trims, delivering a maximum power of 174kw (237ps) and a peak torque of 350nm, paired with a 9-speed automatic transmission.

Was this review help?
13
2
Share
KalebFitz
08/13/25 7:47am

As a father who frequently takes family trips, I've been driving the XT5 for several years. Its dimensions are approximately 4813 mm (about 189 inches) in length, 1903 mm (around 75 inches) in width, 1682 mm (just over 66 inches) in height, with a wheelbase of 2863 mm (112.7 inches). For our whole family, this size is super practical—the interior space is spacious enough, the rear seats don’t feel cramped for legroom, and the trunk capacity is large, easily accommodating a stroller, suitcases, and a bunch of picnic gear. On long trips, the kids complain less, and it handles highways quite steadily. Parking in the city can be a bit tricky as the spaces are tighter, but the rearview camera is a huge help. Compared to other SUVs like the Highlander, which is roughly the same size, the XT5 has a more elegant design and better space utilization. It’s been a great companion for our daily commute and holiday travels, minimizing little hassles on the road.

Was this review help?
14
1
Share
Expand All
OSarah
10/11/25 6:34am

I'm passionate about car modifications and have an in-depth understanding of the XT5's dimensions: overall length of 4813mm, width of 1903mm, and height of 1682mm—these figures are absolutely crucial. When upgrading wheels, I must match the tire size precisely; the wide body allows for larger rims without risking scrapes. The ground clearance is just right, making it effortless to lift the suspension for off-roading. Dimensions also impact aerodynamics and performance, and the spacious layout simplifies installing an aftermarket exhaust system. I often compare it to the Audi Q5—the XT5’s slightly greater width gives me more creative freedom for custom styling, like adding decals or modifying light clusters. In short, dimensions are the foundational specs for modifications, and I rely on them every time I tweak the car.

Was this review help?
17
2
Share
Expand All
LeDeclan
11/24/25 7:41am

I've been driving the XT5 to and from work for almost a year now, with dimensions around 189 inches in length, 75 inches in width, and 66 inches in height. Driving in the city with this size can be a bit challenging, especially in small parking spaces where I have to be careful not to scrape other cars while reversing. Fortunately, the panoramic camera helps me handle it with ease. The interior space is genuinely comfortable, making even rush hour traffic bearable, and the trunk is just right for my laptop bag and miscellaneous items. The larger size does mean slightly higher fuel consumption, so I have to focus on fuel-efficient driving. Compared to the Audi Q5, the XT5 is slightly bigger but offers stable handling, making it suitable for commuters.

Was this review help?
4
1
Share
Expand All
More Forum Discussions

What Causes the Steering Wheel to Make Noise in Volkswagen Cars?

Below are the locations and reasons for the clicking sound when turning the steering wheel in Volkswagen cars: 1. Sound from the turn signal reset: If the turn signal is activated while turning, the sound might come from the reset mechanism's spring clip, which is normal. Sometimes, multiple clicks are heard because the steering column has three automatic reset positions per full rotation. Turning the wheel one full circle will produce three clicks. 2. Noise from the steering column dust cover: If the noise comes from below the steering wheel, it might be due to the steering column dust cover. Lack of lubrication can cause friction sounds. Applying grease inside the dust cover should eliminate the noise. 3. Noise from inside the steering wheel: If the noise originates inside the steering wheel, it is likely caused by the clock spring (spiral cable) for the airbag. Remove the steering wheel and apply grease to the clock spring. If the noise persists, replace the clock spring. Handle the steering wheel gently during removal, or disconnect the airbag fuse to prevent accidental deployment.
20
0
Share

What is the body weight of the 2021 Corolla?

2021 Corolla body weight is approximately 1265-1305 kg. Here are the detailed specifications: 1. Overview: The 2021 Toyota Corolla features a refined exterior design with sharp headlights on both sides extended by silver trim, showcasing a strong sense of layering. The wide lower air intake is neatly designed with uniform inner panels. The fog light area panels are subtly outlined, and the simple circular fog lights are complemented by raised lines on both sides, adding a sense of strength. The car body design is more elongated, with the exterior mirrors adopting a spliced design and the multi-spoke alloy wheels exhibiting exquisite craftsmanship. The rear taillights feature a well-organized spliced design, with stylish silver trim extensions and sharp lines in the fog light area. 2. Powertrain: The vehicle is equipped with either a 1.2T engine or a 1.8L engine + hybrid system, paired with a CVT continuously variable transmission or E-CVT continuously variable transmission. Additional features include knee airbags, active brake/active safety system, full-speed adaptive cruise control, engine electronic anti-theft system, front seat heating function, and car networking system.
19
0
Share

Is It Normal for the Fueling Amount to Exceed the Tank Capacity?

It is normal for the fueling amount to exceed the tank capacity. During the actual fueling process, the amount of fuel may exceed the calibrated capacity. This is because the tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safety level, and there is still some space from the safety level to the tank opening. This space is designed to allow the fuel to expand when the temperature rises without overflowing from the tank. If fuel is added up to the tank opening during fueling, the actual fueling amount will exceed the calibrated tank capacity. If car owners want to know the remaining fuel level in the tank, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it indicates that the fuel is almost empty, and when it is close to F, it means the fuel level is sufficient. Maintenance of the fuel tank is as follows: Drain accumulated water and sediment from the tank, and check for any fuel leakage at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and vapor valves, also check whether the ventilation holes are clear. The filter screen at the fueling port should be kept intact to prevent impurities from entering the tank during fueling and clogging the fuel lines. The sealing gasket on the fueling cap should also be intact to prevent fuel from spilling out while driving.
10
5
Share

What are the types of four-wheel drive chassis?

On-demand drive: Under normal road conditions, the vehicle generally adopts rear-wheel drive. Once encountering poor road conditions or wheel slippage, the computer automatically detects and immediately distributes the engine's output torque to the two front wheels, naturally switching to four-wheel drive mode. Its greatest advantage is simple operation, but at the same time, due to computer control, the vehicle's response may be slower. Part-time four-wheel drive is suitable for high-end RVs and urban sports cars. Full-time four-wheel drive: In this drivetrain, the front and rear wheels always maintain four-wheel drive mode. While driving, the engine's output torque is evenly distributed between the front and rear wheels, ensuring equal torque on both axles. The full-time drive system offers excellent driving control and tracking performance. However, this system consumes more fuel and has poor fuel economy. Full-time four-wheel drive is suitable for professional off-road vehicles. Part-time four-wheel drive: This is a four-wheel drive system where the driver can manually choose between two-wheel drive and four-wheel drive. The driver can switch between two-wheel drive and four-wheel drive modes by engaging or disengaging the transfer case based on road conditions, making it the most common drive mode. Its most notable advantage is the ability to select the drive mode according to actual conditions, making it more economical. Part-time four-wheel drive is suitable for SUVs and non-professional off-road vehicles.
7
3
Share

Why is the Volkswagen Lavida's horn not working?

The reasons why the Volkswagen Lavida's horn is not working include poor contact of the horn's wiring, a blown fuse, or a malfunction in the horn's control unit. The analysis of the Lavida's horn not working is as follows: 1. Check if the live wire has power: Use a screwdriver to scrape the battery terminal of the horn relay against a ground connection. If there is no spark, it indicates a short circuit in the live wire, and you should check for any open circuits in the wiring between the battery fuse and the battery terminal of the horn relay. 2. If the live wire has power: Then use the screwdriver to connect the "battery" and "horn" terminals of the horn relay. If the horn still does not sound, it indicates a fault with the horn itself. If the horn sounds, it indicates a fault with the horn relay or the button. 3. Press the horn button and listen for any sound inside the relay: If there is a "click" sound (indicating the contacts are closed), but the horn does not sound, it suggests that the relay contacts are oxidized or burnt. If there is no "click" sound from the relay, use the screwdriver to short the horn button terminal to a ground connection. If the relay contacts close and the horn sounds, it indicates that the button is oxidized, rusted, or dirty, causing poor contact. If the relay contacts still do not close and the horn remains silent, it indicates a short circuit in the relay coil.
2
4
Share

Can I still use my C1 license while upgrading to B2?

C1 license holders can still drive while upgrading to a B2 license. During the probation period after adding the new vehicle class, driving vehicles permitted under the original license is unrestricted. To upgrade from a C1 to a B2 license, applicants must pass exams and meet the following conditions: Age between 20 and 60 years old; height not less than 155cm; holding a C1 license for at least one year; no record of accumulating 12 penalty points in the current or previous scoring cycle. Specific process for applying for a B2 license: Apply to the vehicle management office for adding the B2 license class; fill out the application form, submit ID and health examination report. To upgrade from a C1 to a B2 license, applicants must pass exams and meet the following conditions: Age between 20 and 60 years old; height not less than 155cm; holding a C1 license for at least one year; no record of accumulating 12 penalty points in the current or previous scoring cycle; visual acuity must be at least 5.0 on the logarithmic visual acuity chart; no record of drunk driving or being primarily responsible for a fatal traffic accident while holding a C1 license. Specific process for applying for a B2 license: Apply to the vehicle management office for adding the B2 license class; fill out the application form, submit ID, health examination report, and original driver's license; attend scheduled theory and practical exams; the new license will be issued by the vehicle management office within 7 working days after passing the exams.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.