What are the dimensions of the Wuling Hongguang V?

1 Answers
DelKira
07/28/25 9:11pm
The length, width, and height dimensions of the Wuling Hongguang V are 4425mm/1670mm/1860mm, which are official data. The length of the Wuling Hongguang V refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The Wuling Hongguang V is equipped with a 1.5L naturally aspirated engine, with a maximum power of 73 kW, maximum horsepower of 99, and peak torque of 140 N·m, paired with a manual transmission. There are relevant national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
Was this review help?
15
5
Share
More Forum Discussions

Why Can't the Car Key Be Turned When Inserted?

The reason why the car key cannot be turned when inserted is due to the automatic steering wheel lock. Below is an introduction to the related content: 1. Anti-theft: The steering wheel lock is a simple anti-theft feature. 2. Function: It ensures vehicle safety. The steering wheel self-locking function is automatically activated after the car is turned off. 3. Principle: The steering lock pin and the steering column are engaged together, preventing the steering wheel from moving. This is the vehicle's anti-theft system detecting a potential risk, thus locking the steering wheel to achieve the anti-theft function. Below are extended solutions for when the key cannot be turned after insertion: 1. Insert the key: Step on the brake and turn the steering wheel left and right. Although the steering wheel is locked at this time, it can still be slightly turned. 2. Turn the key: While turning the steering wheel, turn the key to complete the steering wheel unlocking process.
9
3
Share

Which country does Citroen belong to?

Citroen is a French automobile brand. Here is a detailed introduction to Citroen: 1. Brand Origin: Citroen Automobile Company is the third largest automobile company in France. It was founded in 1915 by André Citroën, and its headquarters is located in Paris, France. 2. Brand Models: Citroen's models include SUVs, sedans, and MPVs, with its main products being small passenger cars and light commercial vehicles. 3. Brand Achievements: Since its introduction to China for production and sales in 1992, Dongfeng Citroen cars have consistently kept pace with the improvements of the models introduced from France. Continuous adaptation work has been carried out for Chinese road conditions and material usage environments, achieving a cumulative sales volume of 800,000 units in China.
8
5
Share

What is the reason for the high idle speed of Wuling Zhiguang?

Wuling Zhiguang's high idle speed is caused by excessive carbon deposits in the vehicle's engine. You can go to an external repair shop to clean the engine carbon deposits. Solutions: 1. Adjust or replace the throttle position sensor; 2. Clean or replace the idle control valve, and use a dedicated decoder to perform basic idle speed settings; 3. Find the leakage point, reseal or replace related components. The length, width, and height of Wuling Zhiguang are 3810mm, 1510mm, and 1820mm respectively, with a wheelbase of 2500mm. The vehicle features additional silver-plated trim pieces and storage boxes in the middle, and the original cassette player has been replaced with a USB-equipped player with a data cable. The application of various materials is more harmonious; the air conditioning vents are more reasonably arranged.
10
3
Share

How to Drain Car Oil?

Methods to drain car oil: 1. First, fill the car's fuel tank completely and then drive it onto a slope. Put the gear in first and engage the handbrake. 2. After securing the car, open the fuel tank cap and insert a pre-prepared soft tube into the tank, placing it as far down as possible. Then, use airflow to draw the oil out. 3. Find a plastic bottle with a slightly larger opening than the soft tube. Flatten the bottle beforehand and then tightly connect the bottle opening to the soft tube. Use pressure to draw out the oil, then remove the bottle and direct the tube's opening into the oil container. 4. While draining the oil, monitor the oil level in the container. Once enough oil has been drained, lift the tube out of the container to let the remaining oil flow back into the tank, or remove the tube from the car's fuel tank to let all the oil in the tube flow into the container to avoid waste.
20
4
Share

How to Remove and Install the Air Conditioning Filter for the Nissan Sylphy Classic?

The steps for removing and installing the air conditioning filter in the Nissan Sylphy Classic are as follows: 1. The air conditioning filter is located behind the glove box, so the glove box needs to be removed first for installation; 2. Open the black snap fasteners of the air conditioning filter compartment; 3. Remove the old air conditioning filter from the vehicle; 4. Firmly squeeze the new air conditioning filter in the middle, then observe the direction of the air flow on the side of the filter, which is indicated by an arrow, and install the new filter in the correct position. The dimensions of the Nissan Sylphy are 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm. The vehicle is equipped with 7 NISSAN i-SAFETY intelligent active safety systems and 3 major driving assistance technologies, building a comprehensive safety fortress.
12
3
Share

Within how many days must a car's color change be registered?

After applying a wrap at a licensed modification shop, the shop will provide the vehicle owner with a receipt or invoice. Within 10 days from the date of issuance of the invoice, the owner can register the modification at the vehicle management office. According to Article 56 of the "Motor Vehicle Registration Regulations," if the vehicle's color is changed without completing the required registration, the traffic management department of the public security authority may issue a warning or impose a fine. The vehicle may also be impounded and required to revert to its original color. To apply for a change in the vehicle's body color, the following documents must be submitted in accordance with the "Road Traffic Safety Law": the "Motor Vehicle Change Registration Application Form," proof of identity for the vehicle owner and their agent, the motor vehicle registration certificate, and the motor vehicle driving license. According to Article 6, Chapter 2 of the "Road Traffic Safety Law," if the area of color change does not exceed 30% of the vehicle's surface, no registration for modification is required. Conversely, if it exceeds 30%, the change must be registered and documented within 10 days after the color change. Important considerations for vehicle color changes: Before changing the vehicle's color, the owner should consult the local vehicle management office where the vehicle is registered to confirm whether the region permits color changes via wraps. If the region does not allow this method, the modification cannot be registered, and the wrap must be completely removed to restore the vehicle's original color. Additionally, according to the "Motor Vehicle Registration Regulations," owners are no longer required to apply in advance to the vehicle management office. They can first change the vehicle's color, install body kits, replace the engine, etc., and then apply for modification registration afterward. According to Article 10, registered motor vehicles must apply for modification registration under the following circumstances: Change in body color. Replacement of the engine. Replacement of the body or frame. Whole vehicle replacement due to quality issues. Change in usage type, such as converting a commercial vehicle to a non-commercial vehicle or vice versa. Change in the vehicle owner's residence, moving in or out of the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": police cars, fire trucks, ambulances, and engineering rescue vehicles must display designated markings, install alarms, and warning lights as required. Other motor vehicles are prohibited from displaying, installing, or using markings, alarms, or warning lights that are specific to these vehicles or resemble them.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.