What are the dimensions of the Volkswagen Magotan?

How to Replace the Battery in a Mercedes Key Fob?

Replacing the battery in a Mercedes key fob involves the following steps: 1. From the end of the key, push up the marked switch to release the hidden mechanical key, then remove it. 2. Using the extracted mechanical key, press against the marked position at the key's end with slight force to open the key casing. 3. Once the casing is open, the battery is located deep inside; gently pry it out using any tool inserted into the side gaps. 4. When installing the new battery, ensure the positive and negative poles are correctly aligned. 5. To reassemble, first insert the top of the casing, then press firmly on the other end to complete the battery replacement.

13

4

Share

Which country does Jetour belong to?

Jetour is a Chinese automobile brand, a product of Chery Holding Group. It has launched models such as the Jetour X70, Jetour X70S, Jetour X90, Jetour X70SEV, Jetour X95, Jetour X70M, and Jetour X70Coupe. Taking the Jetour X70 2021 1.5T Manual Special Edition I 5-seater as an example: it is a mid-size SUV introduced by Chery Automobile, with a length, width, and height of 4720mm, 1900mm, and 1710mm respectively, a wheelbase of 2745mm, equipped with a 1.5T turbocharged engine, a maximum power of 115kw, and paired with a 6-speed manual transmission.

8

1

Share

What Causes the Transmission to Overheat?

Transmission overheating can be caused by: insufficient lubricating oil in the transmission or the use of lubricating oil with an incorrect specification, excessively tight bearing assembly, excessively tight gasket and washer assembly, or excessively small meshing clearance of newly replaced gears. To avoid affecting usage, it is recommended to promptly contact a 4S shop for maintenance and repair. The transmission is a device that changes the speed ratio and direction of motion, located between the clutch and the central drive. It is used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. The main functions of the transmission are: to change the driving force and speed of the vehicle without altering the engine's speed and torque, allowing the vehicle to reverse, and enabling the engine to stop without stalling.

20

5

Share

Why Can't the Key of Baojun 730 Be Pulled Out?

When the key of Baojun 730 can't be pulled out, many people may think there is a malfunction somewhere. In fact, this is just the self-locking anti-theft function that comes with the car's steering column. Reasons why the key can't be pulled out: The cause of this situation is that the steering wheel was moved after the last time the engine was turned off and the key was pulled out. At this point, you just need to apply a little force, wiggle the steering wheel left and right while turning the key to solve the problem. Principle of why it can't be turned: After the key is pulled out, the mechanism controlled by the key will no longer hold the locking tongue, and the locking tongue will pop out under the action of the spring. At this time, if the steering wheel is turned, the locking tongue will engage tightly with the locking groove on the steering column, making the key unable to turn as well.

6

3

Share

What are the differences between different colors of antifreeze?

There are three main differences between antifreeze of different colors: 1. Different colors: Ethylene glycol-based antifreeze appears green. Diethylene glycol antifreeze is blue. Propylene glycol antifreeze is red. 2. Different costs: Ethanol is flammable and volatile, so its content should not exceed 40% when preparing, and it is not suitable for use in diesel engine cooling systems with higher operating temperatures. Glycerin (glycerol) requires a significant amount in water to achieve a low freezing point antifreeze. 3. Different boiling points: The freezing point of glycerin (glycerol) is -17℃, and the boiling point is 290℃. When mixed with water, the lowest freezing point can reach -46.5℃. The freezing point of ethylene glycol is -11.5℃, and the boiling point is 197.4℃. When mixed with water, the lowest freezing point can reach -68℃.

4

5

Share

What are the reasons for the Wuling Rongguang feeling sluggish and powerless when accelerating?

The reasons for the Wuling Rongguang feeling sluggish and powerless when accelerating include: clogged three-way catalytic converter, degraded ignition performance of spark plugs, abnormal fuel injection, etc. Below are detailed cause analyses and solutions: Clogged three-way catalytic converter: Sluggish acceleration and a feeling of being stifled are likely caused by a clogged three-way catalytic converter. When clogged, it restricts engine exhaust flow, causing the engine's RPM increase to lag significantly behind the throttle pedal's depression depth, resulting in a stifled and powerless sensation. Solution: Clean the three-way catalytic converter by removing it, soaking it in oxalic acid or toilet cleaner to break down carbon deposits, and restore it to normal condition. Degraded ignition performance of spark plugs: As the direct component for igniting the air-fuel mixture, the spark plug's performance directly affects the engine's power output. During acceleration, if the spark plug's ignition performance degrades and fails to produce a high-intensity spark promptly, the suddenly increased fuel injection cannot combust fully, leading to sluggish and stifled acceleration. Solution: Use dry tissue or cloth to wipe the distributor inside and out, along with wires, then spray some desiccant specifically designed for the distributor cap, battery terminals, spark plugs, high-voltage wires, and ignition coil. Abnormal fuel injection: For gasoline to be injected into the cylinder in a well-atomized form, sufficient pressure is required as a foundation, with the injector nozzle serving as the passage. Therefore, when the nozzle is clogged, the injected fuel cannot form a good atomized state or reach sufficient injection volume, resulting in sluggish and stifled acceleration. Solution: Gently insert a sewing needle into the nozzle and stir back and forth to clean the injection holes, allowing it to be cleaned and reused.

13

2

Share

What are the dimensions of the Volkswagen Magotan?

How to Replace the Battery in a Mercedes Key Fob?

Which country does Jetour belong to?

What Causes the Transmission to Overheat?

Why Can't the Key of Baojun 730 Be Pulled Out?

What are the differences between different colors of antifreeze?

What are the reasons for the Wuling Rongguang feeling sluggish and powerless when accelerating?

What Causes the Loud Clanking Noise from the Chassis When Going Over Speed Bumps?

What Causes the Electric Power Steering Wheel to Become Heavy?

Is a Four-Wheel Alignment Necessary When Replacing All Four Tires?

How to Measure the Minimum Ground Clearance of a Vehicle?