What are the dimensions of the Volkswagen Golf?

What is the GAC Honda City?

This is a compact sedan under the Honda brand, and the Chinese name for the Honda City is the Fit Aria. More details about the Fit Aria are as follows: Introduction to the 2019 Fit Aria Powertrain: The 2019 Fit Aria is equipped with a 1.5-liter naturally aspirated engine across the entire lineup. The engine code is L15B2, with a maximum power output of 96 kW, a maximum torque of 155 Nm, a maximum power speed of 6,600 rpm, and a maximum torque speed of 4,600 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission. 2019 Fit Aria Suspension: The Fit Aria uses a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.

10

3

Share

How to play videos on Trumpchi GS4?

Here is an introduction about the Trumpchi GS4 car: 1. The exterior design of the Trumpchi GS4 features a bold and imposing front face, smooth in motion and grand in stillness. Like an eagle soaring in the sky, it displays a captivating edge whether in motion or at rest. Every line and curve is meticulously crafted and presented with ultimate beauty. 2. The interior layout of the Trumpchi GS4 adopts a family-style wing-shaped horizontal design. Piano black lacquer decorative elements extend gracefully to the doors, while a technologically advanced and sculptural surround trim runs through the front cabin, stimulating the driver's desire to drive. The hexagonal buttons, inspired by Italian supercar style, orderly arrange the screen, elongated buttons, and bottom buttons, adorned with exquisite chrome decorations, creating a refined and delightful visual experience. 3. The spacious interior offers flexible and versatile space combinations, maximizing both seating and storage space to meet diverse storage needs and lifestyles. It is equipped with an 8-inch high-definition touchscreen for smarter route planning and more precise navigation. The car also features a reversing camera with dynamic guide lines and smartphone connectivity for higher sensitivity.

4

5

Share

How to disassemble the Crown crankshaft pulley?

The disassembly method for the Crown crankshaft pulley mainly consists of the following four steps: 1. First, use a Phillips screwdriver and special tools to remove the air cleaner, and then use a Phillips screwdriver to remove the front grille. 2. Use tools to loosen the bolts of the generator bracket and the generator, then remove the generator belt. 3. Use tools to loosen the bolts of the air conditioning compressor bracket and remove the compressor belt. 4. Use a flathead screwdriver to lock the flywheel in the small hole at the bottom of the transmission, while using tools to loosen the crankshaft pulley bolt and remove it. At this point, the crankshaft pulley can be easily removed. The Crown crankshaft pulley can be directly disassembled using special tools. The crankshaft position sensor is one of the most important sensors in the engine electronic control system. It provides signals for ignition timing (ignition advance angle) and confirms the crankshaft position, used to detect the piston top dead center, crankshaft angle, and engine speed.

13

5

Share

How to Deal with Carbon Deposits in Lavida Engine?

The methods to deal with carbon deposits in Lavida engine are: 1. Remove the engine cover, dismantle the throttle valve, and clean it with carburetor cleaner; 2. Open the oil filler cap, pour in the entire can of cleaner, close the oil filler cap, start the engine and let it idle for 10 minutes before turning it off to clean internal engine carbon deposits; 3. Before refueling, add the entire bottle of fuel additive into the fuel tank to clean the fuel injectors, combustion chamber, spark plugs, and throttle valve; 4. Pour the intake system cleaner into the liquid storage tank of a dedicated cleaning device, connect it to the intake system, start the engine to use vacuum to draw the cleaner into the intake tract for cleaning purposes. The Lavida is a sedan under the Volkswagen brand, with a length, width, and height of 4605mm, 1765mm, and 1460mm respectively, and a wheelbase of 2610mm.

5

2

Share

What are the steps for removing and installing the battery in a Buick GL8?

Here is a step-by-step guide on how to replace the battery: 1. Loosen the negative terminal nut: Open the two fastening buttons on the thermal insulation cover to reveal the red and black insulating caps on the positive and negative terminals. Lift the insulating caps to expose the locking nuts. 2. Remove the negative terminal: Use a wrench or hex socket to loosen the fastening nut on the negative terminal, then gently pry open the fastening block with a flathead screwdriver before pulling out the negative terminal. 3. Remove the positive terminal: Repeat the same process to remove the positive terminal. 4. Remove the locking strap: Unscrew the nut securing the battery's locking strap, release the strap, and then remove the battery. When installing the new battery, simply follow the reverse steps. However, note that when reconnecting the terminals, the order is "positive first, then negative," which is the opposite of the removal sequence. The principle remains the same—to prevent short-circuit risks and ensure safety.

4

2

Share

How to Set the Time on the Jetour X70 Dashboard?

Here are two methods to set the time on the Jetour X70: 1. Enter the settings on the central control screen. Click on personalized settings. Adjust the time in the time settings, and the dashboard time will automatically update. 2. Alternatively, enable GPS synchronization in the settings to automatically sync the time. Below is some information about the Jetour X70: 1. Exterior: The upward-sloping front grille extends to the headlight clusters on both sides, widening the horizontal visual effect of the front end. The eagle-eye-style LED headlights feature a unique design, integrated with matrix LED daytime running lights, giving the vehicle a more fashionable appearance. 2. The roof rack and body adopt an integrated design, with bold body lines highlighting its strong muscular feel. 3. Powertrain: It is equipped with a 1.5T L4 turbocharged engine, delivering a maximum horsepower of 156 PS, maximum power of 115 kW, and maximum torque of 230 Nm. The maximum power speed is 5500 rpm, and the maximum torque speed ranges from 1750 to 4000 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head. The engine is paired with either a 6-speed manual transmission or a 6-speed dual-clutch transmission.

19

4

Share

What are the dimensions of the Volkswagen Golf?

What is the GAC Honda City?

How to play videos on Trumpchi GS4?

How to disassemble the Crown crankshaft pulley?

How to Deal with Carbon Deposits in Lavida Engine?

What are the steps for removing and installing the battery in a Buick GL8?

How to Set the Time on the Jetour X70 Dashboard?

Which country does Maybach belong to?

Where are the airbags located in the BMW X3?

Do You Need to Enter the Left-Turn Waiting Area When Making a U-Turn?

What is the normal fuel consumption range for the Citroen C5?