What are the dimensions of the Trumpchi GS3?

Press the Clutch or Brake First?

When driving at low speeds, you should press the clutch first and then the brake. During normal driving, you should press the brake first, and then press the clutch to shift gears when the speed decreases. In case of emergency braking, you should choose to press the brake first to slow down. There are two points to note about the clutch: 1. Clutch installation: The clutch can be installed coaxially or on separate shafts. The axial direction must be fixed, and neither the driving part nor the driven part should have axial movement. When installed on separate shafts, the coaxiality between the driving part and the driven part shaft should not exceed 0.1mm. 2. Adding lubricating oil: For wet electromagnetic clutches, lubricating oil must be added between the friction plates during operation. Lubrication methods include splash lubrication, oil bath lubrication (with the immersed part being about 5 times the volume of the clutch), and axial oil supply lubrication. For high-speed and high-frequency operations, the axial oil supply method should be used.

18

5

Share

What does the car trouble code P0597 mean?

Car trouble code P0597 refers to the thermostat heater control circuit/open circuit. Below are the specific details about car trouble codes: 1. Meaning: Indicates the fault system being monitored. P stands for powertrain; B for body; C for chassis; U for network or data communication transmission system fault code. 2. The first digit: Indicates whether it is a generic code (applicable to all vehicle manufacturers) or a manufacturer-specific code. For example: 0 refers to a generic code, while 1 refers to a manufacturer-specific code. General Motors in the U.S., for instance, has specific numeric type codes to assist in diagnosing vehicle technical conditions. 3. The second digit: Identifies the type of affected fault system, with numbers ranging from 1-7: 1 for fuel and air metering system; 2 for fuel and air metering system (specifically for injection system circuit malfunction); 3 for ignition system or misfire monitoring system; 4 for auxiliary emission control system; 5 for vehicle speed control and idle control system; 6 for computer output circuit system; 7 for transmission.

17

3

Share

When to Renew an Expired Driver's License?

Motor vehicle drivers should apply for license renewal at the vehicle management office of the issuing authority within 90 days before the expiration of their driver's license. When applying, they must fill out the "Motor Vehicle Driver's License Application Form". Documents required for renewal: Bring two copies of ID card, two 1-inch recent color photos without hats, original ID card, original driver's license, and a medical examination certificate from a county-level or above hospital (free physical examination is also available at the vehicle management office). Renewal process: The motor vehicle driver submits the required materials to the vehicle management office of the issuing authority to apply for renewal. The vehicle management office will process the renewal within one working day after approval. In addition to applying for renewal at the vehicle management office, you can also apply for renewal through the following methods: Renewal via the "Traffic Management 12123" APP. Download the "Traffic Management 12123" APP, select Service Center -- Expired License Renewal Service -- fill in the information. The new license is generally delivered by mail. Visit the "Police-Medical-Post" service point at the post office to process the renewal. It only takes half an hour from registration, physical examination to the production of the new license. Currently, only a few cities have opened this service, such as Hangzhou.

14

1

Share

Should the AC Button Be Pressed When Using Car Air Conditioning?

To use the air conditioning for cooling, it is necessary to press the AC button. Otherwise, the air conditioning system will only blow air at normal temperature because the AC button controls the compressor, which is the main component of the cooling system. Relevant information about car air conditioning is as follows: 1. How to use the A/C button: When the weather is hot and you need to cool down, press the AC button, adjust the temperature control knob to the blue section, then turn on the fan switch. The indicator light will illuminate, and the car air conditioning compressor will start working, blowing cold air from the vents. 2. How car air conditioning works: When the air conditioning is turned on, the blower in the system starts working, so air is blown out. However, the cooling system is not activated yet because the air conditioning compressor has not started working.

13

1

Share

What does the 'ss' displayed on the car dashboard mean?

The 'ss' on the dashboard is the auto start-stop light, which illuminates when the start-stop function is activated and turns off when it is deactivated. Engine auto start-stop is a system that automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) and restarts it when it's time to move forward again. Below are the details: 1. The English name for auto start-stop is STOP&START, abbreviated as STT. The STT intelligent fuel-saving system is a set of controls for engine start and stop. 2. By equipping a traditional engine with an enhanced motor that has idle start-stop functionality, the car can completely shut off the engine when idle stop conditions are met. When the vehicle needs to start moving again, the idle start-stop motor system quickly responds to the driver's start command, rapidly restarting the engine for seamless transition, thereby significantly reducing fuel consumption and exhaust emissions.

16

3

Share

What is the normal data range for the intake pressure sensor?

The normal range for the intake pressure sensor is between 40-80KPA. Here are the specific details about the automotive intake pressure sensor: 1. Function: The intake pressure sensor detects the absolute pressure in the intake manifold behind the throttle. Based on engine speed and load, it detects changes in the absolute pressure within the manifold, converts these into signal voltage, and sends it to the Engine Control Unit (ECU). The ECU uses this signal voltage to determine the basic fuel injection amount. 2. Types: There are various types of intake pressure sensors, including piezoresistive and capacitive types. The piezoresistive type is widely used in D-type injection systems due to its fast response time, high detection accuracy, compact size, and flexible installation. 3. Working Principle: Strain resistors R1, R2, R3, and R4 form a Wheatstone bridge and are bonded to a silicon diaphragm. The silicon diaphragm deforms under the absolute pressure in the manifold, causing changes in the resistance of the strain resistors. The higher the absolute pressure in the manifold, the greater the deformation of the silicon diaphragm, resulting in larger changes in the resistance R.

9

3

Share

What are the dimensions of the Trumpchi GS3?

Press the Clutch or Brake First?

What does the car trouble code P0597 mean?

When to Renew an Expired Driver's License?

Should the AC Button Be Pressed When Using Car Air Conditioning?

What does the 'ss' displayed on the car dashboard mean?

What is the normal data range for the intake pressure sensor?

Does the AMT transmission have gear shift jerks?

What is the fuel consumption of the Buick LaCrosse 1.5t?

What to Do When the Coolant Warning Light Comes On?

Does Fuel Additive Have Any Effect?