···
Log in / Register

What are the dimensions of the Toyota Camry?

3 Answers
CalebLynn
07/29/25 9:03pm
The dimensions of the Toyota Camry are 4850mm in length, 1825mm in width, and 1480mm in height. Here is more information about the Toyota Camry: 1. Compared to the current 2.0G Luxury version, the Toyota Camry 2.0G Comfort version reduces the 6-inch multimedia touchscreen, Bluetooth phone, and rearview camera, while the headlights are changed to halogen, and it adopts a single-disc CD system. 2. The Toyota Camry 2.0E Elite version reduces features such as the leather steering wheel, electric sunroof, electric adjustment and heating functions for the front seats, and comes with fabric seats. 3. The Value-added version of the Toyota Camry has reduced technological configurations. The 2.0L and 2.5L naturally aspirated engines are paired with a 4-speed automatic transmission and a 6-speed automatic transmission, respectively. The 2.0L engine provides a maximum power output of 109 kW (148 horsepower), while the 2.5L engine delivers a maximum power output of 135 kW (184 horsepower).
Was this review help?
13
1
Share
AllieFitz
08/15/25 7:04pm
The dimensions of the Toyota Camry are quite common. For example, the latest eighth-generation model has a length of approximately 4885 mm, a width of around 1840 mm, and a height of 1445 mm. When I drive this car myself, I find the size design very practical, especially with its spacious interior that doesn’t feel cramped. The moderate height also helps keep wind noise low on the highway. However, the length can make parking a bit challenging in tight urban spots, requiring extra caution. The width is manageable for daily driving without much hassle. I’ve also noticed that the dimensions vary slightly between different generations of the Camry—earlier models might be a bit shorter, while the current ones have been slightly lengthened to enhance comfort. Overall, the size is well-balanced, making the car stable to drive, suitable for family use or daily commuting, and it’s also fuel-efficient.
Was this review help?
11
1
Share
Expand All
MacZachary
10/16/25 8:10am
I often pay attention to the details of the Toyota Camry, which is approximately 4.88 meters in length, 1.84 meters in width, and 1.44 meters in height. These dimensions place it at a medium level among its peers. Compared to the Honda Accord, the Accord is slightly longer but similar in width; the lower height design helps reduce the drag coefficient to about 0.27, making it more fuel-efficient at high speeds. Thanks to its wide wheelbase, the rear seating comfort is excellent. Having driven on various road conditions, the length doesn't affect its turning agility. The size details are crucial for handling, and the Camry strikes a good balance between practicality and performance, making it worth a closer look.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

What is the top speed of the Magotan 380?

The top speed of the Magotan 380 model is 230km/h. Below is an introduction about the Magotan:1. In terms of power, the 380 model is equipped with a 2.0T high-power version turbocharged engine, with a maximum power of 162kw and a maximum torque of 350 Nm. 2. There are three power badges at the rear of the Magotan, which are 280, 330, and 380, representing the engine displacement, equipped with 1.4T and 2.0T high/low power engines. 3. In terms of power, the 330 model is equipped with a 2.0T low-power engine, with a maximum power of 186 horsepower and a maximum peak torque of 320 Nm. The Magotan 380 is the high-end model of this car, equipped with a 2.0T high-power turbocharged engine, with a maximum power of 220 horsepower and a maximum peak torque of 350 Nm. 4. The 330 model and 380 model are equipped with the EA888 2.0T turbocharged engine, which is the third-generation engine produced by Volkswagen. This engine adopts intake manifold injection + direct injection technology.
6
4
Share

What does the ECO button on a car mean?

ECO stands for the car's economical driving mode. ECO is an English abbreviation derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the Eco indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. The Eco mode can be categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to enable it. When the driver presses the Eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active Eco mode does not have a dedicated button. When the dashboard Eco indicator light turns on, it serves merely as a reminder function. The Eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most cars employ the active Eco driving mode, meaning they have their own switch button. Therefore, during daily driving, the Eco mode can generally be enabled. However, it is unnecessary to activate the Eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode—especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of Eco but could also impact the vehicle's power. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the Eco mode to deactivate automatically. During idle parking or when in N/P gear or manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not function under these conditions.
15
5
Share

How Many Times to Use Turn Signals in Subject 2 Driving Test?

There are a total of 6 instances where turn signals are required in Subject 2: When starting the vehicle, turn on the left turn signal; When starting on a slope, turn on the left turn signal; During parallel parking, turn on the right turn signal when the vehicle passes the parking spot and stops 30 cm from the curb before reversing; Before shifting into reverse gear for parallel parking, turn on the left turn signal because the steering wheel will be turned fully to the right during reversing, causing the front of the car to shift left; Before exiting the parking spot during parallel parking, shift into drive gear and turn on the left turn signal, then turn it off promptly after exiting; When entering the right-angle turn area, turn on the left turn signal and turn it off promptly after completing the turn. Penalties for incorrect turn signal usage are as follows: Failure to use or incorrect use of turn signals before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. Using the turn signal for less than 3 seconds before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. Subject 2 has a full score of 100 points, with criteria for failure, 20-point deduction, 10-point deduction, and 5-point deduction. The test is passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. For small vehicles (C1, C2), the test includes five mandatory items: reverse parking, parallel parking, slope parking and starting (canceled for C2), right-angle turns, and curve driving (commonly known as S-curves). Some regions also include a sixth item: highway toll card collection. For large vehicles (A1, A2, A3, B1, B2), the test includes: pole test, slope parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, limited-width gate crossing, continuous obstacle crossing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp mountain curves, tunnels, rain (fog) conditions, slippery roads, and emergency handling.
4
3
Share

After renewing the driver's license for six years, what is the validity period?

If there is no full score record (12 points) within the first 6-year validity period, a 10-year validity driver's license can be issued (if there is a 12-point record, only a 6-year validity license can be renewed). You must wait until the 10-year validity period expires without any full score record, otherwise it will be changed to a 6-year license. After that, you can use it until the age of 60. After 60 years old, an annual inspection is required, and a medical examination certificate must be submitted. According to Article 47 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Order No. 123 of the Ministry of Public Security): "The validity periods of motor vehicle driver's licenses are 6 years, 10 years, and long-term. Materials required for driver's license renewal: "Motor Vehicle Driver's License Application Form" (must be signed by the applicant). Identity proof of the motor vehicle driver (original and copy). Motor vehicle driver's license. Medical condition certificate issued by a county-level or above medical institution or a military regiment-level or above medical institution. Four photos of the motor vehicle driver. If an agent is entrusted to handle the renewal, the agent's identity proof and the application form jointly signed by the driver and the agent must also be submitted. The physical examination items for driver's license renewal mainly include vision and color blindness tests, as well as grip strength, squatting and standing up, blood pressure, hearing, electrocardiogram, etc. The medical examination certificate must be issued by a county-level or above medical institution or a military regiment-level or above medical institution. Notes for driver's license renewal: Before renewal, ensure that all traffic violations have been handled, fines paid, and points cleared, otherwise the vehicle management office will not issue the new license. Within 90 days before the expiration of the driver's license, you can apply for renewal at the vehicle management office where the license was originally issued. If there is any scoring cycle during the validity period of the driver's license where 12 points are recorded, a longer validity license cannot be issued. If the driver's license expires within one year, the renewal process remains normal; if it expires between one and three years, the license will be canceled, but renewal can still be processed by passing the subject one exam; if it expires for more than three years, the license will be invalid and cannot be renewed.
9
5
Share

Is the Baojun 360 front-wheel drive or rear-wheel drive?

Baojun 360 is front-wheel drive. Baojun 360 is a 6-seater family car tailored for young families by SAIC-GM-Wuling. On May 10, 2018, SAIC-GM-Wuling announced the launch of Baojun 360. The new car's chassis system adopts a front-engine, front-wheel-drive layout, with body dimensions of 4615*1735*1640mm and a wheelbase of 2750mm. Below is an introduction to Baojun 360: 1. Baojun 360 features a highly original exterior design with sharp and eye-catching body lines. The exterior design is dignified yet youthful, catering to users' various daily driving scenarios. In terms of body dimensions, it has a compact size of 4615*1735*1660mm. 2. The new Baojun 360 uses a black/beige dual-tone interior. The dashboard layout adopts a family-style design. The central control area features a touchscreen display and is also equipped with a full LCD instrument panel. The three-spoke steering wheel comes with multifunction buttons to control the multimedia system and Bluetooth phone. 3. Baojun 360 is powered by a 1.5L naturally aspirated engine with the model number L2B, delivering a maximum output power of 82kW (111PS) and a combined fuel consumption of 6.9L/100km. The engine is paired with a 6-speed manual transmission and an automatic transmission with manual mode. The automatic version uses a rotary knob + paddle shifters for gear changes.
7
1
Share

What car brand has a big V logo?

A big V logo represents Changan Automobile. Chongqing Changan Automobile Co., Ltd., abbreviated as Changan Automobile, is a core vehicle manufacturer under China Ordnance Equipment Group Corporation. It has established a global collaborative R&D layout with six countries and nine locations, each with its own focus, including Chongqing, Beijing, Hebei, Hefei, Turin in Italy, Yokohama in Japan, Birmingham in the UK, Detroit in the USA, and Munich in Germany. Below is an introduction to Changan Automobile: 1. Changan Automobile Global R&D Center is located in Yufu Industrial Park, Liangjiang New District, Chongqing, and was officially put into use on April 9, 2019. Covering an area of over 1,000 acres with a total investment of 4.3 billion yuan, it is an open and shared intelligent R&D platform that integrates global resources. 2. With an investment of approximately 2 billion yuan, Changan Automobile built an international-standard comprehensive test track, covering a total area of about 3,500 acres. It includes conventional roads such as a high-speed loop, basic performance road, dynamic square, and brake test road, as well as unique roads for comprehensive vehicle commodity evaluation, abnormal noise testing, and comfort evaluation. The facility comprises 13 main roads, 4 access bridges, and nearly 70 special roads, with a total test road length of over 50 kilometers. It is the first professional comprehensive automobile test track in the western region that meets national standards.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.