What are the dimensions of the Tiida in terms of length, width, and height?

Which side should you overtake from when driving a motor vehicle?

Overtaking should be done from the left side, except in special regions like Hong Kong, where left-hand drive is generally the norm. When driving, the driver can observe the vehicles and road conditions ahead by slightly deviating from the lane. Therefore, overtaking from the left is safer. Correct steps for overtaking: Before overtaking, observe the vehicles behind and the road conditions through the rearview mirror. Choose a time when visibility is good, the road is straight, and there are no vehicles within 150 meters ahead. After confirming that the surroundings are suitable for overtaking, turn on the left turn signal and honk the horn to signal. At night, if honking is not allowed, use alternating high beams instead. Once the vehicle ahead signals to yield, slightly steer to the left to maintain a safe lateral distance from the vehicle being overtaken. Then, shift down a gear, accelerate by pressing the throttle, and overtake from the left side of the vehicle, minimizing the time spent side by side. After overtaking, maintain speed for a while, check the rearview mirror for approaching vehicles, and once it's safe, turn on the right turn signal and return to the original lane. Introduction to right-side overtaking: When overtaking from the right, the driver needs to move away from the vehicle ahead to observe the road and vehicle conditions, making it harder to judge if overtaking is safe. This increases the risk of accidents, so right-side overtaking is considered a traffic violation.

1

4

Share

What Causes Difficulty in Engaging Third and Fourth Gears?

Difficulty in engaging third and fourth gears is related to the transmission. Below is an introduction to the various gears in an automatic transmission vehicle: 1. P (Park) Gear: This is the parking gear, which uses mechanical devices inside the transmission to lock the rotating parts of the vehicle. It must only be used when the vehicle is completely stationary. Additionally, the gear must be in P when the engine is turned off. 2. N (Neutral) Gear: This is the neutral gear, typically used during brief stops. When in neutral, the driver can release the brake pedal to rest their right foot. However, on slopes, the brake must still be applied to prevent the vehicle from rolling unless the parking brake or electronic brake is engaged. 3. D (Drive) Gear: This is the forward driving gear. When in D, the driver only needs to control the accelerator pedal to adjust the speed. The transmission will automatically determine the appropriate gear based on the accelerator input and vehicle speed, eliminating the need for manual gear changes.

20

5

Share

What Causes the Smell of Gasoline When Starting a Car?

Car starting with a gasoline smell is mainly due to the vehicle's catalytic converter, specifically the following situations: Cold start when the catalytic converter temperature is insufficient: The catalytic converter requires a working temperature between 200-350°C to start functioning, and during normal operation, the temperature should be between 350-700°C. During a cold engine start, the catalytic converter's temperature is low and hasn't reached the working temperature. Therefore, it is normal to smell gasoline in the engine exhaust. Under normal circumstances, the engine RPM is relatively high during a cold start, one of the purposes being to quickly raise the catalytic converter's temperature. Poor combustion condition when the engine is warm: Normally, after gasoline is completely burned and purified by the catalytic converter, no noticeable smell should be present in the exhaust. However, when the engine's combustion condition is poor, an incorrect air-fuel ratio can lead to incomplete combustion of some gasoline, resulting in a possible gasoline smell. This means that the main reason for the gasoline smell when the engine is warm is that some gasoline is not burned. Issues such as engine misfire, severe carbon buildup on spark plugs or fuel injectors, malfunctioning ignition system, inaccurate ignition timing, or a dirty oxygen sensor can all contribute to the gasoline smell. Aging catalytic converter: In many older cars, the catalytic converter may be severely aged, and the oxygen sensor heavily clogged, rendering it ineffective for purification. In such cases, a gasoline smell may also be detected in the exhaust. The solution is to replace the catalytic converter, as general cleaning is often ineffective.

2

Share

Where to Recycle Three-Way Catalytic Converters?

Three-way catalytic converters can be recycled by local automotive recycling manufacturers. Below is more information about three-way catalytic converters: 1. Introduction: The three-way catalytic converter is the most important external purification device installed in a vehicle's exhaust system. It converts harmful gases such as CO, HC, and NOx emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. 2. Structure: The outer shell of a three-way catalytic converter is made of double-layer stainless steel plates forming a cylindrical shape. The interlayer between the double-layer thin plates contains insulating material, such as asbestos fiber felt. Inside, a purifying agent is placed between mesh partitions. The purifying agent consists of a carrier and a catalyst.

7

1

Share

Does a squeaking sound mean the brake pads need to be replaced?

A squeaking sound indicates that the brake pads need to be replaced. Below is relevant information about automotive brakes: 1. Introduction to brakes: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other transportation tools, or machinery. The general principle of braking involves fixing a wheel or disc on the high-speed shaft of the machine and installing corresponding brake shoes, bands, or discs on the machine base to generate braking torque under external force. The braking device, also known as a decelerator, is a mechanical braking device that can slow down the vehicle. 2. Classification of brakes: Drum brakes (advantages and disadvantages of drum brakes), disc brakes, etc.

6

3

Share

What is the standard for measuring brake disc runout?

Brake disc runout is measured with a standard of flatness deviation exceeding 0.05 millimeters. Below is relevant information about automotive braking systems: 1. Introduction to Braking: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other transportation tools, or machinery. The general principle of braking involves fixing a wheel or disc on the high-speed shaft of the machine and installing corresponding brake shoes, bands, or discs on the machine base to generate braking torque under external force. The braking device is a mechanical deceleration system, also known as a retarder. 2. Classification of Braking Systems: Drum brakes (advantages and disadvantages), disc brakes, etc.

13

5

Share

What are the dimensions of the Tiida in terms of length, width, and height?

Which side should you overtake from when driving a motor vehicle?

What Causes Difficulty in Engaging Third and Fourth Gears?

What Causes the Smell of Gasoline When Starting a Car?

Where to Recycle Three-Way Catalytic Converters?

Does a squeaking sound mean the brake pads need to be replaced?

What is the standard for measuring brake disc runout?

Is HAES Speaker a Harman Kardon?

What are the Benefits and Functions of Throttle Body Cleaning?

Is Nissan French or Japanese?

Should the Mercedes S350 use 95 or 98 octane gasoline?