What are the dimensions of the Tiguan X?

1 Answers
EvaFitz
07/29/25 4:26pm
The dimensions of the Tiguan X are a length of 4764mm, a width of 1859mm, and a height of 1628mm, with a wheelbase of 2791mm. The engine model is EA888DPL, equipped with a 7-speed dual-clutch transmission. The fuel tank capacity is 60L, and the luggage compartment volume ranges from 450 to 1561mm. The maximum horsepower is 186, and the maximum torque is 320 Nm. The Tiguan X's maximum power is 137 kW, with the maximum power speed ranging from 4100 to 6000 rpm. The front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It features an electric sunroof, automatic parking, and child seat interfaces.
Was this review help?
18
4
Share
More Forum Discussions

What are the reasons for insufficient turbocharging in the LaCrosse engine?

The reasons for insufficient turbocharging in the LaCrosse are as follows: 1. Air filter blockage: A blocked air filter in the turbocharger increases suction loss, leading to insufficient boost pressure; 2. Increased airflow resistance: Excessive oil deposits in the compressor's internal air passages increase airflow resistance, resulting in reduced boost pressure; 3. Carbon buildup: Poor fuel combustion causes carbon buildup on the rotor, or increased rotational resistance due to damaged turbocharger bearings, also leading to decreased boost pressure.
13
3
Share

What are the standard dimensions for a C1 driving test garage?

C1 driving test garage is 5250mm in length and 2310mm in width; the test area is 1600mm in length and 6830mm in width. Passing standards for C1 driving license test: Traffic regulations and related knowledge (Subject 1) - Written test, full score is 100, passing score is 90 or above. Field driving (Subject 2) - On-site, actual vehicle. Minimum passing score is 80, below 80 is a fail. Road driving (Subject 3) - Highway or simulated field, actual vehicle. Full score is 100, must achieve 90 or above to pass. Safe and civilized driving knowledge - Written test, questions mainly in the form of cases, pictures, animations, etc., question types include true/false, single-choice, and multiple-choice, totaling 50 questions, full score is 100, passing score is 90. Permitted vehicle types for C1: C1 driving license permits small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special operation vehicles; small passenger vehicles with seating capacity of 9 or fewer. C1 driving license does not permit: large buses, tractors, city buses, medium buses, large trucks, ordinary three-wheel motorcycles, ordinary two-wheel motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, C1 license does not permit vehicles with more than 9 seats, nor does it permit trucks with a total length exceeding 6 meters.
13
1
Share

How Long After Obtaining a Temporary Residence Permit Can You Get License Plates?

You can get license plates after obtaining a temporary residence permit and purchasing a vehicle. Below are the relevant details: 1. Regulations: According to Article 44 of the "Regulations on the Registration of Motor Vehicles" (Ministry of Public Security Order No. 124), the owner of a motor vehicle applying for a replacement vehicle license must fill out an application form and submit proof of identity. Additionally, according to Article 64, Paragraph 4, Item 3 of the same regulations, for mainland residents residing in a temporary location, their identity proof includes their "Resident ID Card" or "Temporary Resident ID Card," along with a residence or temporary residence permit issued by the public security authorities. Therefore, when applying for a replacement vehicle license, the applicant must submit the residence or temporary residence permit issued by the public security authorities. 2. Validity of the Temporary Residence Permit: The Temporary Residence Permit is valid for one year. If continued temporary residence is required after the expiration, the holder must apply for a renewal at the local public security station within the temporary residence area. Any non-local individual aged 16 or older who intends to reside for more than 30 days must apply for a Temporary Residence Permit within 10 days of arriving at the temporary residence location. However, individuals temporarily staying for visiting relatives or friends, tourism, medical treatment, or education are exempt from applying for a Temporary Residence Permit.
2
2
Share

Can a C2 license be upgraded to C1?

You can upgrade from a C2 driver's license to a C1, provided that: You need to hold a C2 driver's license, ID card, and a health certificate, then apply at the vehicle management office that issued the C2 license. You must undergo study and tests, and upon passing, you can exchange for a C1 driver's license. If you already hold a motor vehicle driver's license and apply to add a permitted vehicle type, you must not have accumulated 12 penalty points in the current scoring cycle or the most recent scoring cycle before the application. C1 driver's license test: The test subjects include traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving common sense—four items in total. Passing standards: Traffic regulations and related knowledge (Subject 1)—written test, full score is 100, 90 or above is passing. Field driving (Subject 2)—on-site, actual vehicle. The minimum requirement is 80 points, below 80 is failing. Road driving (Subject 3)—highway or simulated site, actual vehicle. Full score is 100, must achieve 90 or above to pass. Safe and civilized driving common sense—written test, questions mainly in the form of cases, pictures, animations, etc., with question types including true/false, single-choice, and multiple-choice, totaling 50 questions. Full score is 100, 90 is passing.
9
5
Share

What is the difference between a ramp and an acceleration lane?

The differences between a ramp and an acceleration lane include speed limits, varying lengths, different driving sequences, and traffic flow distinctions. A ramp refers to a connecting road that links an access road to the main highway, while an acceleration lane is a designated lane for vehicles to accelerate before merging into high-speed traffic. Speed limits: The minimum speed on a ramp is 60 km/h, whereas there is no minimum speed limit on an acceleration lane. After passing the ramp entrance, vehicles must enter the acceleration lane and are not allowed to directly merge into the main traffic lane from the ramp entrance, as doing so may result in penalties and demerit points. Different lengths: The length of an acceleration lane is designed based on factors such as traffic flow and speed, while there is no fixed length requirement for ramps. Different traffic flow: The traffic flow on an acceleration lane is relatively lighter, whereas ramps tend to have heavier traffic. After entering the acceleration lane, drivers should accelerate promptly to safely merge into the main traffic lane and continue driving normally. Different driving sequences: When entering a highway, vehicles must first pass through the ramp, then enter the acceleration lane, and finally merge into the main traffic lane. The acceleration lane comes after the ramp. According to highway regulations, the minimum speed on an acceleration lane is 60 km/h, and all vehicles must accelerate to at least 60 km/h before merging into the high-speed lane.
20
5
Share

Does the base model Honda Lingpai have Bluetooth?

The base model Honda Lingpai also comes with Bluetooth. There are two methods for Bluetooth connection: 1. For car Bluetooth that appears as a display: First, turn on the car Bluetooth; at this point, the car Bluetooth display will show a pairing request password, usually 0000. Then, enable Bluetooth on your phone; search for the car Bluetooth information on the phone, click it, and enter the pairing password. This will establish the connection. 2. Another type similar to a Bluetooth headset: First, press and hold the power button of the car Bluetooth for 3-5 seconds until the car Bluetooth enters pairing mode. The display may vary for different Bluetooth products, but in pairing mode, the indicator light will flash alternately in red and blue. Only in pairing mode can the car Bluetooth device be detected. Next, enable Bluetooth on your phone by going to Settings > Bluetooth > Turn On, then click the search option below the interface to find the corresponding pairing name of your car Bluetooth and click to connect. A prompt usually appears asking to confirm the connection; simply click confirm. If some devices require a password during pairing, you can refer to the manual and enter it, usually "0000". Once connected successfully, the car Bluetooth indicator light will enter standby mode. Under the Bluetooth devices section on your phone, it will also show as connected for the corresponding device.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.