What are the dimensions of the Tiguan?

2 Answers
DelCody
07/29/25 4:00am
FAW-Volkswagen Tiguan dimensions, detailed introduction: FAW-Volkswagen Tiguan: Length: 4525MM; Width: 1809MM; Height: 1685MM; Wheelbase: 2684MM. Model introduction: The Volkswagen Tiguan is a compact SUV produced by SAIC Volkswagen, which was first introduced to consumers in 2009. Upon its debut, it received widespread attention and popularity. The SAIC Volkswagen Tiguan offers four versions with a total of seven models: Urban, Trendline, Comfortline, and Highline. They are equipped with Volkswagen's flagship 1.8TSI and 2.0TSI engines, delivering excellent performance in both power and fuel efficiency. Paired with a 6-speed manual transmission or an Aisin 6-speed automatic transmission, the power is better utilized, providing exhilarating performance while maintaining more environmentally friendly emissions.
Was this review help?
8
0
Share
McMichael
08/12/25 7:46am
As a long-time owner of the Tiguan, having driven it for three years, I'm very familiar with its dimensions: approximately 4712 mm in length, 1839 mm in width, and 1673 mm in height. These dimensions make it very convenient for daily use, and finding parking spots in the city isn't too difficult, especially since the small turning radius makes parallel parking a breeze with its agile handling. The interior is spacious, comfortably seating five adults without feeling cramped, and the rear seats can be folded down to accommodate large luggage. On the highway, the body remains stable, and the fuel consumption is quite economical, averaging around 8 liters per 100 kilometers. When choosing an SUV, dimensions affect off-road capability, and the Tiguan's height is just right—no need to worry about scraping the undercarriage on rough roads. Overall, it's an excellent choice for family and urban travel.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

What is the maximum number of days for renewing a driver's license?

Driver's license renewal should normally be completed within 90 days. If the license has expired for less than one year, it can still be renewed normally without being canceled. Documents required for driver's license renewal: Original driver's license of the applicant; ID card and a copy of the applicant; Physical examination certificate issued by a county-level or above medical institution or military medical institution; Three one-inch personal photos of the applicant. Go to the vehicle management office to fill out the "Motor Vehicle Driver's License Application Form" and submit it along with the above documents to the relevant window of the vehicle management office for processing. Related services of the vehicle management office: The vehicle management office is mainly responsible for handling motor vehicle registration, modification, transfer, mortgage, and cancellation, as well as applications for driver's licenses, replacements, renewals, verifications, and other services related to motor vehicles and drivers.
5
1
Share

What is the fuel consumption of a 2.0T SUV in summer?

The fuel consumption of a 2.0T SUV in summer ranges between 7L/100km and 8L/100km. Factors affecting fuel consumption: Incorrect driving habits have the greatest impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues. Experts have conducted fuel consumption tests during acceleration and found that fuel consumption increases by 2 to 3 times compared to driving at a constant speed. Tips to reduce fuel consumption: If you want to save fuel, avoid frequent lane changes, overtaking, and merging. Besides increasing fuel consumption, these actions also raise the risk of accidents, and each gear shift consumes additional fuel. Even in traffic jams, try to queue in order. Cutting in line will only result in higher fuel consumption.
19
1
Share

How Many Points Can Be Reduced Through Traffic Law Learning?

Traffic law learning is not about adding points but is a policy that allows motor vehicle drivers to reduce points for road traffic safety violations through education. Within one scoring cycle, a maximum of 6 points can be deducted. According to Article 5 of the Notice on the "Work Standards for Reducing Points for Road Traffic Safety Violations Through Accepting Traffic Safety Education (Trial)" issued by the Ministry of Public Security on January 14, 2020 (Public Traffic Management [2020] No. 14), motor vehicle drivers who apply to participate in traffic safety education to reduce points for traffic violations must participate in corresponding road traffic safety laws, regulations, and related knowledge learning, examinations, or traffic safety public welfare activities based on their highest permitted driving license type and meet relevant requirements to apply for point reduction. Traffic law learning is a measure for drivers holding a driving license who have been penalized for traffic violations. After participating in online traffic safety learning and passing the examination, their penalty points can be reduced. This is a convenient traffic management measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Function: Traffic law learning reduces existing penalty points on a driving license rather than adding points or substituting for violation penalties. The points obtained through free learning are used to clear penalty records. For example, if a driver is penalized 6 points for a violation, passing the point-reduction examination will clear these 6 points, allowing a fresh start. Regulations: The number of points that can still be deducted after traffic law learning depends on how many points the driver had before participating in the learning. However, the cumulative penalty points cannot exceed 11. Regardless of participation in traffic law learning, a driving license only has 12 points. Traffic law learning can only reduce existing penalty points and does not increase the total points to 18. Specific considerations are as follows: Eligible Individuals: Motor vehicle drivers holding a driving license issued by the People's Republic of China, regardless of the permitted driving license type or whether they are commercial vehicle drivers, can participate in traffic law learning. They must participate in corresponding road traffic safety laws, regulations, and related knowledge learning and examinations based on their highest permitted driving license type. Specific Rules: Motor vehicle drivers participating in online road traffic laws, regulations, and related content learning must complete 5 minutes of continuous learning each time, accumulating 30 minutes of study within 3 days. They can then register for an examination within 7 days. Passing the examination reduces 1 point. Drivers can also attend on-site learning, with each session lasting no less than 1 hour. After completing the required study hours, they can apply for an examination. Passing the examination reduces 2 points. Drivers can also participate in offline safety public welfare activities, with each hour-long session reducing 1 point. Cases Not Accepted: The following situations will not be accepted: In the previous scoring cycle, the driver had two or more full-point penalty records. Within a 3-point cycle, the driver was involved in hit-and-run accidents, drunk driving, or the use of forged or altered documents or license plates. The driving license is in the probationary period or has not been reviewed on time. The driver has unresolved traffic violation records. The driver owns a vehicle with an expired safety technical inspection or one that has not been deregistered as required. The driver has already reduced the maximum of 6 points in the current cycle.
20
3
Share

What is the height requirement for seat belts?

Seat belts must be worn at heights of two meters and above. Primary functions of seat belts: The main functions of the shoulder belt and lap belt are to cushion the forward or backward inertia of occupants during an accident, keeping them securely in their seats as much as possible. When properly worn, the shoulder belt should cross the chest cavity, and the lap belt should fit snugly against the hip bones. Avoid friction: When using seat belts, ensure they do not rub against sharp tools to prevent damage. Do not recline the seat back too far, as this may prevent the seat belt from extending and retracting properly. When the seat is unoccupied, retract the seat belt into the retractor to prevent the buckle from hitting other objects during emergency braking.
3
1
Share

What Causes a Sudden Loss of Idle Speed in a Motorcycle?

Reasons for a motorcycle suddenly losing idle speed: intake pipe leakage, idle switch not closing. Intake pipe leakage: Fault analysis: According to the idle speed stability control principle of the engine, under normal circumstances, the opening degree of the idle speed control valve and the intake air volume strictly follow a certain functional relationship, that is, as the idle speed control valve opening increases, the intake air volume correspondingly increases. If there is intake pipe leakage, the intake air volume and the opening degree of the idle speed control valve will not strictly follow the original functional relationship, meaning the intake air volume changes abruptly with the variation of the idle speed control valve. The air flow meter cannot accurately measure the true intake air volume, causing the ECU to inaccurately control the intake air volume, leading to unstable engine idle speed. Idle switch not closing: Fault analysis: If the idle contact opens, the ECU determines that the engine is under partial load. At this time, the ECU determines the fuel injection volume based on signals from the air flow meter and the crankshaft speed. However, the engine is actually operating under idle conditions with less intake air volume, resulting in an overly rich air-fuel mixture and an increase in speed.
20
5
Share

Why is the Kawasaki GTR1400 engine overheating?

Reasons for the Kawasaki GTR1400 engine overheating: insufficient coolant, radiator leakage, cooling fan malfunction, thermostat failure. Insufficient coolant: Prolonged water circulation during engine operation can gradually deplete the coolant in the engine's cooling system, leading to a lack of water in the radiator. If the owner fails to promptly inspect and replenish the coolant, it can easily result in engine overheating. Radiator leakage: Broken or loose radiator hoses can cause leaks, obstructing water circulation and, in severe cases, leading to engine "boiling over." Cooling fan malfunction: Damage to the cooling fan or short circuits in the wiring can cause the fan to operate improperly or at a slow speed, preventing the dissipation of engine heat and resulting in a natural rise in engine temperature. Thermostat failure: The thermostat is a device that controls the flow path of the coolant. If it becomes stuck or fails, the engine's large and small circulation cycles will inevitably be affected, preventing the effective dissipation of engine heat.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.