What are the dimensions of the Teana?

1 Answers
Aria
07/30/25 1:13am
The dimensions of the Nissan Teana are 4901*1850*1450mm (length*width*height), which are official data. The vehicle length refers to the distance between two vertical planes perpendicular to the longitudinal symmetry plane of the vehicle and touching the foremost and rearmost protruding parts of the vehicle. The vehicle width refers to the distance between two parallel planes parallel to the longitudinal symmetry plane of the vehicle and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The vehicle height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The naturally aspirated engine of the Teana has a maximum power of 115kW and a maximum torque of 197Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque at 4400 rpm. It is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a CVT transmission. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
Was this review help?
16
2
Share
More Forum Discussions

Can You Drive a Sedan on the Sichuan-Tibet Line?

You can drive your own sedan on a self-drive tour along the Sichuan-Tibet Line. However, the vehicle must have strong engine power. Just like humans, cars can also experience altitude sickness in high-altitude areas. A powerful car can, to some extent, help reduce its "altitude sickness." Here is some relevant information about self-drive tours: 1. Introduction: A self-drive tour is a type of independent travel, distinct from traditional group tours. It offers travelers flexibility in choosing destinations, participation procedures, and experiencing freedom. 2. Characteristics: It provides travelers with flexibility in selection, participation, and freedom of experience, featuring inherent traits such as freedom and personalization, flexibility and comfort, as well as seasonality and selectivity.
3
5
Share

How Serious Is It to Drive Several Kilometers with the Handbrake On?

The following are the consequences of driving several kilometers with the handbrake on: 1. Severe brake pad wear: Driving with the handbrake engaged causes significant brake wear. The most direct effects are accelerated wear of the brake discs and hardening of the brake pads due to overheating, as well as stretching of the handbrake cable. This leads to reduced braking performance, and the burnt smell sometimes noticed by the driver comes from this. In severe cases, smoke may appear from the rear of the car. 2. Tire damage: Driving with the handbrake on also damages the tires. Keeping the handbrake engaged for a long time can cause the rear wheels to lock up, leading to smoke from friction and potentially causing brake failure.
3
5
Share

What to do if the car is burning oil a bit seriously?

Solutions to the problem of a car burning oil a bit seriously are: 1. Replace the engine oil with a new one corresponding to the engine model; 2. Replace the new valve oil seal; 3. Replace the new oil seal between the turbocharger and the intake pipe. Once the problem is identified, the corresponding damaged parts can be repaired or replaced. If the car still burns oil seriously after these operations, it needs to be sent to a 4S shop for a comprehensive inspection. The functions of engine oil are: 1. To alleviate friction and high temperature; 2. To reduce gas leakage and prevent external pollutants; 3. To prevent water, air, acidic harmful gases from contacting with parts; 4. To buffer the pressure rise at the engine cylinder port.
5
2
Share

What are the reasons for the 2017 Lavida's one-button start failing to ignite?

Here are the specific reasons why the 2017 Lavida's one-button start car fails to ignite: 1. Steering wheel locked: The steering wheel lock is an anti-theft feature. When the car is turned off, turning the steering wheel from the centered position to a certain angle in one direction will lock the steering wheel. In the locked state, the one-button start function will not work. It is necessary to turn the steering wheel left and right while pressing the engine start button to release the tension and unlock the steering wheel. 2. Smart key battery dead: When the vehicle's smart key battery is dead, the key's transmission power is low, making it difficult for the in-car sensor to detect it. In this case, the one-button start cannot complete the ignition.
12
5
Share

How Many Attempts Are Allowed for Each Driving Test Subject 3?

There are 5 attempts allowed for the driving license Subject 3 test. Important notes for Subject 3 examination: 1. If fingerprint verification fails, the candidate must exit the vehicle to re-collect fingerprints before rejoining the queue for examination. 2. During the vehicle perimeter inspection to observe exterior conditions, maintain a 1-meter distance from the vehicle body to ensure accurate radar signal detection. 3. When multiple candidates are preparing for the test simultaneously, after one examinee completes the test, the next candidate must follow standard procedures - exiting the vehicle, performing pre-test preparations including the perimeter inspection and nighttime lighting simulation before commencing the examination.
3
1
Share

Do automatic transmission cars need to engage the handbrake when parking?

Automatic transmission cars need to engage the handbrake when parking. When parking, the electronic handbrake of an automatic transmission can be engaged either by shifting into P gear first and then pulling up the handbrake, or by pulling the handbrake first and then shifting into P gear. However, if you pull the handbrake first and then shift into P gear, the driver's foot must remain on the brake pedal and cannot be released. This is because the automatic transmission contains a hydraulic transmission mechanism, and the flow of hydraulic fluid has a certain inertia that cannot change abruptly. Below are the advantages of electronic handbrakes: 1. Eliminating the mechanical brake handle inside the car provides more design flexibility for the interior styling. 2. The parking brake is completely replaced by a single button instead of a manual parking brake handle. 3. Additionally, electronic handbrakes are more reliable than mechanical handbrakes.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.