What are the dimensions of the Teana?

What are the new regulations for annual review of a B2 driver's license after points deduction?

B2 driver's licenses require an annual driver's review, which must be conducted within 30 days after the end of the current scoring cycle at the local vehicle management office where the license was issued. However, if there are no accumulated penalty points during the current scoring cycle, the review for that cycle can be exempted. Key points regarding B2 license review: Holders of a B2 large truck driver's license must undergo a review at the traffic management department of the public security authority within thirty days after the end of each scoring cycle. If there are no penalty points recorded during a scoring cycle, the review for that cycle is waived. Motor vehicle drivers aged 70 or above must undergo an annual physical examination and submit a medical certificate issued by a county-level or higher medical institution (or a military medical institution at the regimental level or above) within thirty days after the end of the scoring cycle. Within ninety days before the expiration of a motor vehicle driver's license, the holder must apply for a renewal. When renewing the license, they must undergo a review by the traffic management department of the public security authority. If a motor vehicle driver's household registration is transferred out of the jurisdiction of the original vehicle management office, they must apply for a license renewal at the vehicle management office of the new jurisdiction, during which a review is also required.

14

0

Share

What to Do If Vision Fails the Driver's License Renewal Test?

You need to go to a local hospital or optician to have your vision checked and get glasses matched to your vision condition. After getting the glasses, you can go to the medical examination center to retake the physical examination, which will allow you to pass. This method is permitted and there will be no issues at all. Here are some additional notes on license renewal: 1. If the license has expired for less than a year, renewing it promptly will not have any impact. 2. If the driver's license has expired for more than two years, you need to reapply at the vehicle management office and retake the subject one test before you can renew the license. 3. If it has expired for more than three years, the driver's license will be canceled, and you will have to retake the driving school exams. 4. For renewing a driver's license in a different location, you need to submit your local residence permit. 5. When renewing the driver's license, all traffic violations must be settled; otherwise, the renewal cannot be processed.

12

3

Share

How to Schedule the Subject 4 Driving Test?

The process for scheduling Subject 4 is as follows: 1. Open the Comprehensive Traffic Safety Service Management Platform and select your province/city. 2. Choose 'Exam Scheduling'. 3. Click 'Register Now'. 4. Fill in user information: Enter your ID number and the mobile number registered during application (Note: If your mobile number has changed, please update it at the DMV service center). 5. Select user type: Choose 'First-time applicant for a motor vehicle driver's license'. 6. SMS verification. 7. Service notice: Read and agree, then click 'Next'. 8. Confirm information: Verify details are correct and click 'Next'. 9. Exam scheduling: Select the subject, test venue, scheduling period, enter the image verification code, and click 'Next'. 10. Choose date and session: The system offers two scheduling modes—self-selection of test sessions or system-assigned scheduling. In self-selection mode, the system displays all available test sessions within your selected period, allowing you to choose one or multiple sessions. In system-assigned mode, it automatically matches eligible sessions within your selected period. After selection, click 'Next' to confirm. 11. Confirm submission: Review information again and click 'Complete' if correct. 12. Submission completed: Upon successful submission, the system generates a transaction serial number. It will arrange the test and announce the scheduling result on the designated result publication date.

6

2

Share

What is the fuel consumption of the 3.0t Volkswagen Touareg?

The fuel consumption of the 3.0t Touareg is 12.3 liters per 100 kilometers. The Touareg is a high-end luxury mid-to-large-sized SUV under the Volkswagen brand, sharing the same platform as the Porsche Cayenne. The Volkswagen Touareg is equipped with two types of engines: a 2.0-liter turbocharged engine and a 3.0-liter turbocharged engine. Here is an introduction to the Volkswagen Touareg: 1. The Touareg has a wheelbase of 2904mm, with length, width, and height dimensions of 4878mm, 1984mm, and 1717mm respectively. The 2.0-liter turbocharged engine delivers 245 horsepower and a maximum torque of 370 Nm. This engine reaches its maximum power at 5000 to 6500 rpm and its maximum torque at 1600 to 4300 rpm. It features hybrid injection technology and uses an aluminum cylinder head with a cast iron cylinder block. The engine is paired with an 8-speed automatic transmission. 2. The 3.0-liter turbocharged engine produces 340 horsepower and a maximum torque of 450 Nm. This engine achieves its maximum power at 5300 to 6400 rpm and its maximum torque at 1340 to 5300 rpm. It is equipped with direct fuel injection technology and uses an aluminum cylinder head and block. The engine is matched with an 8-speed automatic transmission.

13

0

Share

Where to Collect the Vehicle Inspection Exemption Sticker?

Vehicle inspection exemption stickers can be applied for at the local vehicle management office without any fees. The vehicle owner must personally bring the following documents: vehicle license (original and copy), ID card of the vehicle owner, compulsory traffic insurance policy, and proof of vehicle and vessel tax payment or exemption. Additional information: 1. Vehicle inspection exemption means: For vehicles that meet the exemption conditions within 6 years, the on-site inspection process is waived. Owners only need to apply for the inspection sticker every two years and affix it to the vehicle as required. Essentially, this exempts the vehicle from on-site inspection. As long as the vehicle meets the national policy conditions, it does not need to undergo on-site inspection; the owner can directly apply for the inspection sticker from the traffic management department. Before applying, the owner should check for any traffic violations and resolve them before proceeding. 2. Types of vehicles not eligible for inspection exemption: (1) Vehicles involved in accidents during this period, i.e., new vehicles within 6 years that have been involved in fatal accidents, are not eligible for exemption; (2) Minivans (referring to 7-seater and above vehicles); (3) Vehicles that have not been registered for a long time after purchase are not eligible for exemption. For vehicles that have not been registered within 4 years of manufacture, the original inspection rules apply within 6 years (i.e., inspection every 2 years), and they are not eligible for exemption.

19

4

Share

How to Lock the Car with a Spare Key?

Spare keys can be categorized based on whether they come with a remote control. Below is a detailed introduction to their unlocking methods: 1. With a remote control: No different from the main key, it can remotely unlock the car. 2. Without a remote control: Only mechanical unlocking is possible. Here is supplementary information on the main functions of a car's smart key: 1. When approaching the car: As the driver brings the key in their pocket near the car, the key and the car begin exchanging preset command information via radio waves. Subsequently, the car's locking system, security system, and engine control system are all activated. 2. When opening the car door: As soon as the driver touches the door handle, sensors detect this pressure, and the servo motor unlocks the door while the turn signals flash twice. The seat, steering wheel, and exterior rearview mirrors then automatically adjust to the driver's preset position. 3. Before starting the car: When the driver presses the brake pedal, the steering wheel lock is released, the start button is enabled, and the parking brake is automatically disengaged. 4. When exiting the car: Upon exiting, the driver must press the lock button. If the turn signals flash once, it indicates that the doors are securely locked. Simultaneously, the key and the car establish a new command information protocol.

10

4

Share

What are the dimensions of the Teana?

What are the new regulations for annual review of a B2 driver's license after points deduction?

What to Do If Vision Fails the Driver's License Renewal Test?

How to Schedule the Subject 4 Driving Test?

What is the fuel consumption of the 3.0t Volkswagen Touareg?

Where to Collect the Vehicle Inspection Exemption Sticker?

How to Lock the Car with a Spare Key?

How to Handle Toilet Waste in RVs?

Can the Tiguan use 92 octane gasoline?

What does E/P mean on a car?

What does the 'a' displayed on the vehicle mean?