What are the dimensions of the Rolls-Royce Phantom?

1 Answers
AubreeDella
07/29/25 10:56pm
The long-wheelbase version of the Rolls-Royce Phantom measures 5990 mm in length, 2018 mm in width, and 1656 mm in height, with a wheelbase of 3772 mm. The standard-wheelbase version measures 5770 mm in length, 2018 mm in width, and 1648 mm in height, with a wheelbase of 3552 mm. Details about the Rolls-Royce Phantom are as follows: 1. The Rolls-Royce Phantom is a large luxury sedan, equipped with a 6.7-liter V12 twin-turbocharged engine across all models. This engine delivers 571 horsepower and a maximum torque of 900 Nm, achieving peak power at 5000 rpm and maximum torque at 1700 rpm. The engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. 2. The Rolls-Royce Phantom employs a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The multi-link suspension enhances the tire's ground contact performance, thereby improving traction.
Was this review help?
3
3
Share
More Forum Discussions

Is the tire of the Mercedes-Benz A200L a run-flat tire?

The tire of the Mercedes-Benz A200L is not a run-flat tire. Extended information about Mercedes-Benz is as follows: 1. Brand History: Mercedes-Benz is a world-class luxury car brand, considered one of the most premium automobile brands globally. It is renowned for its perfect technical level, stringent quality standards, innovative capabilities, and a series of classic coupe styles. 2. Logo: The original Mercedes-Benz logo featured the 'Benz' letters surrounded by laurel branches. In 1926, Daimler and Benz merged, and the star-shaped emblem was combined with the Benz laurel wreath, with 'Mercedes-Benz' written below. Later, the laurel branches were replaced by a circle, and the 'Mercedes-Benz' text was removed. With the merger of these two historic car manufacturers, the company reapplied for a patent for the trademark. The star within the circle evolved into today's logo, which has been used ever since and has become one of the most famous trademarks in the world.
11
4
Share

Is it necessary to warm up the car when the temperature is above 0 degrees Celsius?

It is still necessary to warm up the car when the temperature is above 0 degrees Celsius, but there is no need to keep idling in place. Just maintain low-speed driving for a few kilometers before driving normally. Benefits of warming up the car: The biggest benefit of warming up the car is avoiding cold engine wear. When starting the engine after it has been sitting overnight, the upper part of the engine is in a state of insufficient lubrication. It takes about 30 seconds after starting for the engine oil to reach the parts that need lubrication the most, such as the pistons, connecting rods, and crankshaft. Precautions for warming up the car: Idling to warm up the car is not better the longer it lasts. Avoid pressing the accelerator hard while idling. It is best to drive steadily at around 40 km/h for the first 2-4 kilometers. After starting the engine, wait about 30 seconds, then drive a short distance at low speed and in low gear to allow lubrication of the transmission, differential, and wheel hub bearings. Once the water temperature is normal, you can drive as usual.
9
5
Share

What does a 'dead file car' mean for new cars?

Dead file car refers to a type of vehicle that cannot be transferred but can be driven normally. A dead file car is one that cannot undergo ownership transfer, and its license plate remains valid until the car is scrapped. It can also undergo regular vehicle inspections. These cars are typically smuggled vehicles purchased in the past, which were then registered with the approval of the vehicle management office leadership. All the paperwork is genuine, and the vehicle management office acknowledges it, but there is no record in the archives except for the leadership's approval for registration. Therefore, such cars can only be driven locally and cannot be transferred or re-registered elsewhere. Additional information: 1. There are many possible reasons for a dead file car, such as the inability to locate the original owner or debt disputes. Small-scale import procedures also fall under the category of dead file cars (small-scale imported cars cannot be transferred out of the city and can only undergo local ownership transfer). 2. It is best not to purchase a dead file car as it offers fewer protections.
18
4
Share

Where to Obtain the Motor Vehicle Inspection Compliance Sticker?

To obtain the motor vehicle inspection compliance sticker, you need to bring the vehicle registration certificate, compulsory traffic insurance policy, and ID card to the local vehicle management office or traffic police station for free collection. The procedure for obtaining the motor vehicle inspection compliance sticker is as follows: 1. For vehicles exempt from inspection within 6 years (provided no major accidents have occurred), no on-site inspection is required; however, every two years, you must visit the vehicle management office to collect the annual inspection sticker and green environmental protection sticker. When it's time for inspection, bring your ID card, vehicle registration certificate, and the current valid compulsory traffic insurance policy to the vehicle management office. 2. Upon arrival at the vehicle management office, go to the designated window and submit the documents to the staff; after the staff enters the information, you can proceed to the next window to directly collect the annual inspection sticker and environmental protection sticker.
17
0
Share

What is the normal tire pressure for SUV vehicles?

The tire pressure for SUV tires is typically between 2.2-2.5 bar. Both overinflation and underinflation can have negative effects. For specific details, please refer to the vehicle's manual. Tire pressure is an indicator of a vehicle's load capacity. The load capacity depends on the level of tire pressure. According to the relationship between the tire's load index, pressure, and load capacity, higher tire pressure increases load capacity, while lower pressure reduces it. Overinflated tires are more prone to blowouts, especially during high-speed driving in summer. It can also increase vehicle jolts, affecting driving comfort and safety. The tire's contact area with the ground decreases, accelerating wear in the middle of the tire. Reduced grip can lead to skidding and longer braking distances. Underinflated tires increase contact with the ground, causing overheating, accelerating rubber aging and wear, increasing rolling resistance, reducing the vehicle's top speed, and increasing fuel consumption. Drivers should adjust tire pressure according to external environmental temperatures and driving conditions. In summer, high temperatures can cause tires to heat up, and high pressure increases the risk of blowouts, so pressure should be slightly lower. In winter, tire pressure should be slightly higher than in summer. On smooth roads, maintain normal tire pressure. On unpaved roads, reducing tire pressure ensures better grip and helps avoid punctures from sharp objects.
12
0
Share

What are the symptoms of a faulty Passat sensor?

If the oxygen sensor of a Volkswagen Passat fails, the computer of the electronic fuel injection system will not receive information about the oxygen concentration in the exhaust pipe, thus unable to perform feedback control on the air-fuel ratio. This will lead to increased engine fuel consumption and exhaust pollution, as well as engine issues such as unstable idling, misfiring, and surging. Therefore, it is essential to promptly address the fault or replace the sensor. Below are relevant details: 1. Oxygen sensor poisoning: Oxygen sensor poisoning is a common and difficult-to-prevent fault, especially for vehicles frequently using leaded gasoline. Even a new oxygen sensor may only function for a few thousand kilometers. If the lead poisoning is mild, using a tank of unleaded gasoline can remove the lead from the sensor's surface and restore normal operation. However, excessively high exhaust temperatures often cause lead to penetrate the sensor's interior, obstructing oxygen ion diffusion and rendering the sensor ineffective, necessitating replacement. 2. Silicon poisoning: Silicon poisoning of the oxygen sensor is also common. Generally, silicon dioxide generated from the combustion of silicon compounds in gasoline and lubricants, as well as organic silicon gases improperly emitted from silicone rubber gaskets, can cause the oxygen sensor to fail. Therefore, it is crucial to use high-quality fuel and lubricants.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.