What are the dimensions of the Range Rover Evoque?

What is the principle of turning a car past the B-pillar?

B-pillar rule is suitable for four-door cars with balanced body proportions. When the car is about to turn, if the driver's line of sight just reaches the B-pillar, it indicates that the car's length is just right to avoid collision and can safely complete the turn. For common right turns at intersections, you can start steering when the vehicle's B-pillar reaches the stop line. The principle of turning past the B-pillar is that when you feel half of the car's body has passed the stop line, you can make the turn. Precautions for turning are as follows: 1. Control speed: The first thing to pay attention to when turning is not to apply the brake during the turn, as it can easily lead to loss of control, causing skidding or even rollover. You should reduce the speed to an appropriate level before entering the turn. 2. Avoid neutral gear when turning: Try not to enter a turn in neutral gear, especially for U-turns. In neutral gear, the engine cannot restrain the wheels' movement, and the car is essentially moving by inertia, which greatly reduces the effectiveness of all braking and steering operations.

4

5

Share

How many points are deducted for parking within 50 meters of an intersection?

Parking within 50 meters of an intersection results in a deduction of 2 points. Below is relevant information about the penalties: 1. Urban streets: Illegal parking on ordinary urban roads or main urban roads, or parking on roadsides without parking lines, generally results in a fine but no point deduction. 2. Violations: If you park illegally at key traffic points such as traffic lights, you will be fined and have 3 points deducted. The most severe penalty is for illegal parking on highways, occupying emergency lanes, which results in a fine and a deduction of 6 points. 3. No-parking zones: Some areas have no-parking signs or markings, barriers, pedestrian crossings, or construction zones where parking is not allowed. Areas such as intersections, sharp curves, steep slopes, tunnels, railway crossings, and within 50 meters of these locations are prohibited for parking, as are bus stops. Parking is also not allowed within 50 meters of gas stations.

12

0

Share

What does the D gear in a car mean?

The D gear in a car refers to the drive gear, which is used for normal driving on regular road surfaces and is one of the most commonly used gears. It automatically adjusts to a comfortable operating state based on road conditions and vehicle speed. Below is an introduction to more gears: 1. N gear: Neutral gear, which functions similarly to the neutral gear in a manual transmission and is used for temporary parking. Another function is that if the engine suddenly stalls while driving and you need to restart it while moving, you must shift into N gear. Generally, you shift into N gear when waiting at a traffic light. 2. P gear: Parking gear, used when the engine is off or the car is stationary. When the vehicle is stopped, you must shift into P gear to power off, remove the key, and lock the doors. Once shifted into P gear, the vehicle's braking system is locked, ensuring that even if parked on a slope, the vehicle will not move. When using P gear, the car must remain stationary; otherwise, the transmission may be damaged. 3. R gear: Reverse gear, which functions the same as the reverse gear in a manual transmission. Before shifting into R gear, ensure the vehicle has come to a complete stop. Shifting into R gear while the vehicle is still moving may damage the transmission. 4. L gear: Low gear, also known as the climbing gear, which limits the speed ratio range to reduce speed and increase torque. Generally, it only allows shifting between 1st and 2nd or 1st and 3rd gears. 5. OD gear: Overdrive gear, also known as the high-speed gear, used for high-speed driving. In this mode, the car is more fuel-efficient, but it is best to turn it off on roads with frequent uphill and downhill sections to avoid frequent gear shifts. 6. S gear: Also known as sport mode. In this mode, the engine speed and corresponding shift timing are automatically adjusted, with slower upshifts or earlier downshifts to keep the engine at higher RPMs. Whether climbing a slope or accelerating for a quick overtake, S gear can be used. In S gear, the transmission automatically downshifts, increasing engine RPM and torque output for greater power, resulting in a more noticeable acceleration feel, but with higher fuel consumption.

8

5

Share

What is a Three-Way Catalytic Converter in Automobiles?

An automobile's three-way catalytic converter is a device that transforms harmful gases such as CO, HC, and NOx emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Below is an introduction to the three-way catalytic converter: 1. Three-Way Catalytic Converter: The core component of a three-way catalytic converter is a porous ceramic material, installed in a specially designed exhaust pipe. It is called a substrate because it does not participate in the catalytic reaction itself but is coated with precious metals such as platinum, rhodium, and palladium. It is the most important external purification device installed in a vehicle's exhaust system. 2. Three-Way Catalytic Converter at High Temperatures: When high-temperature exhaust gases pass through the purification device, the catalyst in the three-way catalytic converter enhances the activity of CO, HC, and NOx, promoting specific oxidation-reduction chemical reactions. CO is oxidized into colorless, non-toxic carbon dioxide gas at high temperatures; HC compounds are oxidized into water (H2O) and carbon dioxide; and NOx is reduced into nitrogen and oxygen. These three harmful gases are converted into harmless gases, thereby purifying the vehicle's exhaust. 3. Cleaning the Three-Way Catalytic Converter: The three-way catalytic converter generally does not require cleaning. If it becomes severely oxidized, it should be replaced directly because the operating temperature of the converter is around 350 degrees Celsius, leaving no liquid water residue, making cleaning ineffective.

11

4

Share

At what water level is a car considered flooded?

The criteria for defining a flooded vehicle are as follows: If the water level exceeds half of the wheel height and enters the interior, it is called a water-soaked vehicle; if the water reaches the engine hood, it is called a flooded vehicle; if the water exceeds the roof, it is called a submerged vehicle. The specific water levels and impacts when a car is submerged are: 1. Water just reaching the chassis—the floor may get damp, but significant water ingress is unlikely, and the impact on electrical components is minimal. 2. Water exceeding half of the wheel height—due to the vehicle's incomplete sealing, water begins entering the cabin. For low-sedan models, the water level may affect seat adjustment motors, heating, ventilation, and other electrical components. 3. Water almost completely covering the tires—the cabin water level will submerge the seat cushions and center console, affecting numerous electrical systems. 4. Water reaching the engine hood—the cabin water rises to the dashboard level, and the headlights and engine air intake begin taking in water. 5. Water fully covering the engine hood—nearly all interior electrical components will be compromised. 6. Water exceeding the roof—the headliner and sunroof module sustain damage, with no interior component remaining unaffected.

15

1

Share

What is the fuel consumption of the manual Hyundai Elantra?

The combined fuel consumption of the manual Hyundai Elantra is 5.6L/100km. The above figure is the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 5.6-7.3L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before red lights, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline for combustion. Heavier cars also have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low, the injected gasoline during cold starts does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, in low temperatures, the engine computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

9

1

Share

What are the dimensions of the Range Rover Evoque?

What is the principle of turning a car past the B-pillar?

How many points are deducted for parking within 50 meters of an intersection?

What does the D gear in a car mean?

What is a Three-Way Catalytic Converter in Automobiles?

At what water level is a car considered flooded?

What is the fuel consumption of the manual Hyundai Elantra?

What is the diameter of a Prado tire in centimeters?

Does Shutting Off an Automatic Car in Neutral Gear Harm the Vehicle?

What Causes the Bumpy Noise in the Jeep Compass?

What is the reason why the clutch cannot be pressed down and the gear cannot be engaged?