What are the dimensions of the Range Rover?

1 Answers
McCarson
07/29/25 8:17pm
The length, width, and height of the Range Rover are 5000mm/2073mm/1869mm, with a wheelbase of 2922mm. Below are the relevant details: Interior: Optional configurations such as rear seat ventilation and rear LCD display have become standard features in high-end models. Mid-to-high-end models come standard with lane assist, road traffic sign recognition, fatigue driving reminder, HUD head-up display, Apple CarPlay, and Baidu CarLife mobile mapping functions. Powertrain: The Land Rover Range Rover is equipped with a 3.0T inline six-cylinder twin-turbocharged engine paired with a 48V mild hybrid system, delivering a combined maximum power of 360Ps and a combined peak torque of 495Nm.
Was this review help?
20
1
Share
More Forum Discussions

What Do the 2 and L Gears Mean on an Automatic Transmission?

L stands for LOW, meaning low gear, which is the same as the numerical gear 1. Both are used to limit the gear to the lowest position to obtain high torque without shifting up. The number 2 represents limiting the gear between 1st and 2nd gears, which is useful for starting on slippery roads or moving slowly to restrict gear shifting. When driving on icy or snowy roads or in traffic jams, where the vehicle moves slowly, using D gear can cause the gear to fluctuate, increasing fuel consumption. Switching to L gear ensures the vehicle remains in 1st or 2nd gear, avoiding extra fuel consumption and wear on the vehicle. It is also suitable for uphill and downhill driving. In addition, automatic transmissions have other gears like P, R, N, D, S, and M. Here’s a detailed introduction: P (Parking) Gear: Used for long-term parking. It locks the vehicle's rotating parts mechanically by engaging the parking brake inside the transmission, securing the output shaft and applying the handbrake to prevent movement. R (Reverse) Gear: Used for reversing. Many models have a safety mechanism requiring the driver to press a button on the gear lever before shifting to R. N (Neutral) Gear: Similar to manual transmission neutral but not identical. N gear can be used when starting the engine, towing, or during temporary stops (e.g., at traffic lights). D (Drive) Gear: The most commonly used gear for normal driving conditions. S (Sport) Mode: In this mode, gears can shift freely, but the shift timing is delayed to keep the engine at higher RPMs for increased power. However, this mode increases fuel consumption. M (Manual) Gear: This is the manual mode for automatic transmission vehicles. In M gear, drivers can manually shift gears using the + and - symbols near the gear lever. The + symbol upshifts, while the - symbol downshifts.
9
4
Share

What are the functions of the center console buttons in the 2020 Mercedes-Benz GLA200?

The center console buttons of the Mercedes-Benz GLA200 are very comprehensive. Here is a detailed introduction: 1. Overview: The 2020 Mercedes-Benz GLA200 features a 10.25-inch center multimedia screen equipped with the MBUX system. The functions are clearly divided and can be operated via touch or handwriting pad, making it easy to use. The interior design might be the most attractive feature of the new GLA for young people, even though it has already appeared in the A-Class and GLB, it still sparks curiosity. 2. Functions: The full LCD instrument panel measures 10.25 inches, with very fine display effects and no noticeable glare under strong light, providing a great experience. The 64-color ambient lighting is highly playful, supporting dynamic multi-color modes. Different zones of the light strips can display different colors and continuously change.
20
2
Share

What are the passing criteria for hill start and fixed-point parking?

Hill start and fixed-point parking is generally the second item in the subject two driving test. Many students are not very familiar with the requirements and key points of fixed-point parking and starting. The following are the passing criteria for hill start and fixed-point parking operations: 1. After the vehicle stops, if the front bumper is not positioned on the pole line and exceeds 1250px in front or behind - fail. 2. When starting, if the vehicle rolls back more than 750px - fail. 3. After the vehicle stops, if the starting time exceeds 30 seconds - fail. 4. After the vehicle stops, if the front bumper is not positioned on the pole line but does not exceed 1250px in front or behind - deduct 10 points. 5. When starting, if the vehicle rolls back less than 750px - deduct 10 points. 6. After stopping, if the body is more than 750px away from the road edge line - deduct 10 points.
3
3
Share

Why doesn't the car door light turn on?

Possible causes for the light not turning on include a burnt-out bulb or the driver manually turning off the dome light switch. After checking the status of the car's dome light switch, determine whether the bulb has malfunctioned. 1. Door classification: Based on the number of doors, car models can be categorized into two-door, three-door, four-door, and five-door vehicles. Considering the car's purpose and passenger convenience for entering and exiting, the door opening angle is typically controlled at around 70 degrees. 2. Precautions when opening car doors: After confirming safety, slowly open the door to exit the vehicle: Once safety is confirmed through the door gap, you can exit the car. When getting out, continue to observe the traffic behind you and always keep the door under control with your hand. Only open the door to an angle sufficient for exiting; do not push the door open abruptly.
12
2
Share

What Causes the Metallic Clanking Sound from the Car Chassis?

Metallic clanking sounds from the car chassis are typically caused by damage, deformation, or detachment of components in the disc brake system, such as the brake shoe support plate, vibration damping spring plate, or guide plate. These issues increase the clearance between the brake shoe iron and the brake caliper support frame, leading to mutual collisions that produce the noise. It is recommended to visit a repair station to fix deformed parts and replace detached components. Relevant information about the car chassis is as follows: 1. Introduction: The car chassis consists of four main systems: the transmission system, running gear, steering system, and braking system. The chassis serves to support and install the car engine and its various components and assemblies, forming the overall shape of the vehicle. It also receives power from the engine to enable movement and ensure normal driving. 2. Maintenance Guidelines: To maintain the chassis in winter, thorough cleaning and rust-proof treatment are essential. Start with a complete cleaning of the chassis. If there is excessive mud or dirt, use an oil-removing cleaner to wash it once, revealing the chassis's original color, before proceeding with rust-proof care.
16
2
Share

Should I Buy the Peugeot 508L in Silver Gray or Black?

Whether to buy the Peugeot 508L in silver gray or black should be based on the owner's needs. Here is some relevant information about Peugeot: 1. Introduction: Peugeot Automobile is part of the Peugeot Group, formed in 1976 by the merger of Peugeot and Citroën, making it the third-largest automobile company in Europe. Peugeot's simple, crisp, and bold lines symbolize a more perfect and mature Peugeot automobile. 2. Product Numbering: Peugeot models are named using the x0y format. The x indicates the size (or class) of the car, while the y indicates the model (the larger the number, the newer the model). Therefore, a Peugeot 406 is definitely larger and newer than a Peugeot 305.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.