What are the dimensions of the Prado?

2 Answers
McNatalie
07/23/25 11:09pm
The Prado is a representative model of Toyota's off-road vehicles, also known as the Land Cruiser Prado. The dimensions of the 2019 Prado 3.5L Automatic TXL Premium Edition are 4840/1885/1890mm (length/width/height), with a wheelbase of 2790mm. It belongs to the latest version of the Land Cruiser series. It is both an SUV and an off-road vehicle, featuring excellent power performance and fast acceleration, but it is relatively fuel-consuming. The exhaust standards comply with national regulations, making it an environmentally friendly vehicle. In terms of configuration: In addition to the newly added features, the 2019 Prado retains all the configurations of the current TXL standard version, including a 7-seat layout, tire pressure monitoring, parking radar, cruise control, a 4.2-inch instrument panel LCD display, 8-way electric adjustment for the driver's seat, 4-way electric adjustment for the front passenger seat, front seat ventilation and heating, 50/50 split folding for the third-row seats, electric folding and flattening, an onboard refrigerator, three-zone automatic air conditioning, and an 8-inch multimedia display. In terms of power: The 2019 Prado continues to be equipped with the 7GR-FKS 3.5L naturally aspirated V6 engine, with a maximum power output of 205kW and a peak torque of 365Nm. It also features dual injection technology and an automatic start-stop function. The transmission system is paired with a 6-speed automatic transmission and a new part-time four-wheel-drive system.
Was this review help?
18
5
Share
VanElle
08/10/25 7:07pm
As an experienced driver who has been driving a Prado for several years, I find the car's dimensions quite substantial: approximately 4840mm in length, 1885mm in width, and 1880mm in height. Driving it daily feels bulky, and parking can be tight, especially since many mall garages have a height limit of 1.9 meters, requiring extra attention to the roof. On the highway, it's stable, though the wind resistance is noticeable, leading to slightly higher fuel consumption. However, the spacious interior makes family trips with my wife, kids, and dog very comfortable. The turning radius is around 5 meters, so navigating narrow roads in old neighborhoods requires caution. We specifically chose a house with a large garage to avoid the hassle. Overall, while the size makes parking a challenge, the off-road capability and cargo space are definitely worth praising.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

Clutch Has No Pressure and Won't Spring Back, Can't Engage Gear?

The reasons why the clutch pedal doesn't spring back and can't engage gear: 1. Clutch return spring detachment or breakage: The clutch's rebound is achieved by the return spring. Therefore, when the clutch return spring detaches or breaks, the clutch cannot spring back. As long as the pedal doesn't return, the engine's power cannot be transmitted to the transmission, resulting in the vehicle having no power. When this fault occurs, simply replacing the clutch return spring will suffice. 2. Clutch pedal breakage: If the clutch pedal breaks, the pressure applied by the driver to the clutch pedal cannot be transmitted to the transmission. This issue can only be resolved by replacing the entire clutch assembly. Extended content, solutions for clutch not disengaging: 1. If the clutch not disengaging has seriously affected the vehicle's normal use, the best solution is to call for tow truck assistance. 2. If it's just the clutch return spring that's broken, we only need to replace the clutch spring without the need to replace the entire clutch assembly. 3. If the clutch pedal is damaged, then the clutch pedal assembly needs to be replaced.
16
1
Share

What is the actual fuel consumption of the Bestune T99?

The FAW Bestune T99, as a mid-to-large-sized SUV under the Bestune brand, has a combined fuel consumption ranging from 7.9L/100km to 9.5L/100km. Here is additional information about fuel consumption: 1. Fuel consumption refers to the fuel economy indicator of a car when driving at a constant speed on good road conditions. Since constant-speed driving is a fundamental operating condition for vehicles on highways, and this type of fuel consumption is easy to measure, it is widely adopted. 2. France and Germany use the constant-speed fuel consumption at 90Km/h and 120Km/h as the main evaluation indicators for fuel economy. China also adopts this indicator. 3. Since cars often experience various driving conditions such as acceleration, deceleration, braking, and engine idling in actual driving, constant-speed fuel consumption is often lower and significantly different from actual fuel consumption.
7
4
Share

What Causes Starter Freewheeling?

The reasons for starter freewheeling: 1. Check whether the starter drive gear and engine flywheel ring gear are excessively worn or have missing teeth; 2. Verify the integrity and effectiveness of the friction clutch, and whether the spring tension meets the specified value; 3. Due to prolonged use and frequent exposure to high temperatures, the starter shift fork is prone to fatigue, distortion, and loss of performance. When starting the engine in a cold or low-temperature condition, freewheeling may occur. If the engine is restarted after a 15-second pause as specified, the freewheeling phenomenon may persist. Troubleshooting methods: 1. Disassemble and clean the starter, visually inspect the wear on the shift fork and shift fork ring for excessive wear or breakage, and repair or replace if necessary; 2. While checking the performance of the friction clutch, also inspect the spring tension, and replace if it falls far below the required specification; 3. Examine the wear on both the starter drive gear and the engine flywheel ring gear, or measure the tooth taper with specialized tools. Replace if excessively worn, and perform welding repairs if cracks are found.
5
4
Share

Which Gear is the Reverse Gear?

The position of the reverse gear varies depending on the vehicle model. Below are specific introductions for manual and automatic transmission vehicles: 1. For manual transmission vehicles, the parking gear and neutral gear are the same, located in the gap in the middle of the gear positions. When parking, it is essential to engage the handbrake. In most 5-speed cars, the reverse gear is located below the 5th gear. In a few vehicles, the reverse gear shares the same position as the 1st gear, but to engage reverse, you need to press down the gear shift knob and then shift into reverse. 2. In automatic transmission cars, the reverse gear is mostly positioned towards the front of the gear console, immediately after the P (Park) gear and before the N (Neutral) gear. Whether the car has a P gear or not, the reverse gear and the drive gear are always separated by the neutral gear. Additionally, to engage or disengage the R (Reverse) gear, you must press the brake pedal and either press the safety button on the gear shift handle or push down the gear shift lever.
3
1
Share

What Does a Crossover Vehicle Mean?

Crossover vehicles, as the name suggests, are models that cross the boundaries of vehicle types, combining the advantages of different models. Initially, crossover vehicles mainly referred to SUV models with sedan-like characteristics. Later, the term evolved to broadly describe models that freely combine elements of sedans, SUVs, MPVs, and other vehicle types. Below are the specific details about crossover vehicles: 1. The most notable feature of crossover vehicles is that they cannot be classified into any existing car category. They do not belong to sedans, SUVs, or MPVs, yet they encompass the advantages of all these vehicle types. With their perfect body proportions, refined and luxurious interiors, excellent handling, and elegant appearance, they surpass their peers in the same class. 2. Crossover vehicles prominently showcase the comfort, sportiness, practicality, luxury, and versatility pursued by the new generation of cars. The "Enjoy, Drive, Safety" crossover concept proposed by the Chrysler Group has become the standard for measuring the essence of today's crossover vehicles.
12
1
Share

What are the differences between Xiangling M1 and M2?

The differences between Xiangling M1 and M2 lie in the cargo compartment and wheelbase. Below are detailed introductions about the two models: Differences in the cargo compartment: For the M1 model, the cargo compartment is 3.05 meters long, 1.61 meters wide, and 1.7 meters high. In terms of body dimensions, the length, width, and height are 5230/1750/2580mm respectively, with a wheelbase of 2750mm. For the M2 model, the cargo compartment is 3.1 meters long, 1.71 meters wide, and 1.7 meters high. In terms of body dimensions, the length, width, and height are 5280/1850/2590mm respectively, with a wheelbase of 2850mm. Differences in wheelbase: The front wheelbase of the M1 is 1320mm, and the rear wheelbase is 1280mm. The front wheelbase of the M2 is 1410mm, and the rear wheelbase is 1320mm.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.