What are the dimensions of the Peugeot 408?

What are the five major types of automobile overall layout?

The five major types of automobile overall layout are as follows: 1. Front-engine, rear-wheel drive (FR): The engine is longitudinally mounted at the front of the car and connected longitudinally to the transmission, driving the rear wheels via a driveshaft. Most early cars adopted the FR layout, which is now primarily used in mid- to high-end sedans. Its advantage lies in the even distribution of axle load, meaning a balanced front-to-rear weight ratio, resulting in better handling stability. 2. Front-engine, front-wheel drive (FF): The engine is transversely mounted at the front, directly driving the front wheels through the transmission, eliminating the need for a driveshaft and thus resolving the cabin floor issue inherent in FR layouts. This configuration is called the FF layout. FF is currently the most widely used layout for micro, small, and medium-sized sedans. 3. Rear-engine, rear-wheel drive (RR): This layout was widely used in early microcars due to its compact structure, lacking both a heavy driveshaft and complex front-wheel steering and drive mechanisms. Its drawback is the heavier load on the rear axle, leading to oversteer tendencies opposite to FF layouts, meaning poor stability during high-speed cornering and a propensity for skidding. Few sedans still use the RR layout today. 4. Mid-engine, rear-wheel drive (MR): This layout places the engine between the front and rear axles. Its greatest advantage is obviously the even axle load distribution, resulting in neutral handling characteristics. The downside is that the engine occupies cabin space, reducing space utilization and practicality. Therefore, MR is mostly adopted by sports cars that prioritize handling performance. 5. Four-wheel drive: Regardless of whether the engine is front-mounted, mid-mounted, or rear-mounted, four-wheel drive can be implemented. Since all four wheels are powered, traction utilization is maximized, but its notable drawbacks include increased weight and space consumption. Additionally, power loss rates are higher compared to single-axle drive systems. Four-wheel drive was once exclusive to off-road vehicles, but in recent years, with the development and application of limited-slip differential technology, 4WD systems can now precisely distribute torque among the wheels. Consequently, an increasing number of high-performance sports cars are adopting four-wheel drive to enhance handling.

3

0

Share

What does it mean when the engine fault indicator light comes on?

The reasons for the engine fault indicator light coming on are: 1. Poor gasoline quality can lead to incomplete combustion of the air-fuel mixture in the cylinders; 2. Carbon buildup in the intake tract and on the pistons can cause poor atomization, resulting in incomplete combustion; 3. Spark plugs that haven't been replaced for a long time may have weakened performance characteristics; 4. Faulty car sensors. An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. If you notice the engine fault light is on, it is recommended to have it inspected at a repair station as soon as possible.

17

1

Share

What is the dumbest method for reverse parking in the C1 subject 2 test?

C1 test reverse parking steering method is as follows: When the lower edge of the left rearview mirror aligns with the starting line, quickly turn the steering wheel fully to the right; When the distance between the car body and the library corner line is greater than or equal to 30cm, keep the steering wheel unchanged and continue reversing; If the distance between the car body and the library corner line is less than 30cm, turn the steering wheel one circle to the left until the appropriate distance is reached, then continue reversing; When the car body is parallel to the library sideline, straighten the direction, and stop when the lower edge of the left rearview mirror aligns with the library corner line. Permitted vehicle types for C1 license: The C1 driving license allows driving small and mini passenger cars, light and mini cargo trucks; light, small, and mini special-purpose vehicles; small passenger cars with seating capacity of 9 or fewer people. C1 driving license does not permit driving: large buses, tractor-trailers, city buses, medium buses, large trucks, ordinary three-wheel motorcycles, ordinary two-wheel motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, the C1 license does not allow driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.

16

0

Share

What is the fuel consumption of the GAC Trumpchi Emkoo?

GAC Trumpchi Emkoo is equipped with a 1.5T 177-horsepower L4 engine, paired with a 7-speed wet dual-clutch transmission, capable of accelerating from 0 to 100 km/h in 6.95 seconds. The urban fuel consumption of the GAC Trumpchi Emkoo is 9.5L per 100 kilometers. Methods to reduce fuel consumption: 1. Correctly adjust tire inflation pressure: Proper tire pressure can reduce rolling resistance and lower fuel consumption. Additionally, slightly higher tire pressure than the recommended value (+0.2bar) can also save fuel. 2. Moderate use of in-car auxiliary electrical equipment: Using certain electrical equipment can significantly increase fuel consumption, such as the air conditioning system's cooling function. If the heating purpose has been achieved, the seat heater should be turned off promptly. The rear window heater should be turned off when there is no fog or ice on the window. 3. Proper use of gears: Match the gear to the appropriate speed; avoid high-speed low-gear or low-speed high-gear driving. Shift gears in advance, ensuring the gear matches the speed appropriately, and avoid driving at high speeds in low gears or low speeds in high gears.

1

4

Share

What does Lane Change Assist mean?

Lane Change Assist, also known as Blind Spot Monitoring, functions by alerting the driver to approaching vehicles from behind through the side mirrors or other locations on the vehicle. Due to vehicle design, there are certain blind spots in the rear visibility range during lane changes or overtaking. The Lane Change Assist system aims to minimize these blind spots as much as possible, allowing the driver to assess the situation of vehicles behind through warning signals. When changing lanes, if there is a vehicle approaching from behind, the Lane Change Assist system will sound an alarm to alert the driver, ensuring safe lane changing. The principle of Lane Change Assist is similar to radar. When preparing to change lanes by signaling, if the driver fails to notice other vehicles in adjacent lanes, the LED lights on the mirrors will flash to warn the driver to pay attention to safety.

12

3

Share

How to Check the Last 6 Digits of the Engine Number?

Methods to check the last 6 digits of the engine number: 1. Inspect the engine block, though it's usually hard to observe directly—a lift can assist; 2. Check your vehicle's driving license, which includes a section for the engine number where it can be clearly seen; 3. Refer to the motor vehicle registration certificate, which records the engine number; 4. Review the purchase invoice, as it contains detailed vehicle information including the engine number; 5. The vehicle purchase tax payment receipt also lists the engine number, providing another verification method.

14

3

Share

What are the dimensions of the Peugeot 408?

What are the five major types of automobile overall layout?

What does it mean when the engine fault indicator light comes on?

What is the dumbest method for reverse parking in the C1 subject 2 test?

What is the fuel consumption of the GAC Trumpchi Emkoo?

What does Lane Change Assist mean?

How to Check the Last 6 Digits of the Engine Number?

Can a Beijing-registered car be transferred to Hebei?

Does the Highlander Burn Engine Oil?

What does 50cc mean?

What are the causes of a faulty driver's door contact switch in Volkswagen vehicles?