What are the dimensions of the Nissan Bluebird Sylphy?

1 Answers
XavierFitz
07/29/25 10:40pm
The vehicle has a length of 4610mm, a width of 1695mm, and a height of 1510mm. Below is more information about the Nissan Bluebird Sylphy: 1. Body and Interior: It adopts a design called "S-curves" by Nissan, creating a unique new fashionable and sporty style for Nissan. This design is particularly evident in the seats: the front seats mimic the shape of a double shell, while the rear seats resemble a living room sofa, offering softness and comfort. The intelligent air conditioning system can detect pollen, nitrogen dioxide, and carbon monoxide, delivering fresh and clean air into the cabin, providing a healthy and comfortable environment for passengers. 2. More uniquely, the central armrest storage box can rotate forward and backward and features an ultra-large capacity (9.7L) design, making it convenient to place handbags or briefcases and other miscellaneous items, fully showcasing the humanized aspect of Japanese space-saving design. In terms of power, there are two engine options: a 2.0L "MR20DE" engine, which can deliver 90% of its torque at just 2000 rpm, making it very suitable for daily urban use while also improving fuel efficiency.
Was this review help?
18
5
Share
More Forum Discussions

How to Open the Door and Exit a Ferrari?

First, locate the car key and press the unlock button. Upon hearing the unlocking sound, pull the door handle to open the door. To operate the door-opening mechanism, simply press the button and lift it slightly to open the door, allowing you to exit the vehicle. For certain Ferrari sports car models, the door-opening method is similar to most sports cars, featuring a door handle. Pull the handle outward to open the door.
9
5
Share

How to Adjust the Headlight Height on a Ford Focus?

First, the driver should open the engine compartment cover and locate the two white plastic screws on the headlight. To adjust the vertical position of the headlight, turn the lower white plastic screw. When adjusting the headlight, the vehicle should be facing a wall. When adjusting the height of the car's headlights, the driver first needs to turn on the car's ignition switch, and the headlights should also be in the on state. If the vehicle is not under heavy load or is driving on a flat road, the driver should adjust the headlight to the normal position "0".
12
1
Share

How to Fix a Flooded Engine?

First, remove the spark plugs and clean them thoroughly. If there is excessive residual oil in the cylinders, it needs to be suctioned out before the engine can be started. Alternatively, press the accelerator pedal all the way down and attempt to start the engine 3 to 5 times consecutively, allowing the engine to run for more than 5 seconds each time before releasing the pedal. Since engine flooding commonly occurs in carbureted engines, it is advisable to press the accelerator pedal a couple more times when starting the engine in winter to increase the amount of gasoline in the cylinders.
16
4
Share

What is the maximum wading depth of the Bora?

The wading depth of the Bora is 350mm. The wading depth of the Bora is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact cars and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake of the Bora is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, or the wheels and doors of other vehicles as reference points to judge the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed recklessly; instead, choose an alternative route.
14
4
Share

Where to Adjust the Driver's Seat Height?

There is a lever on the left side of the driver's seat and the right side of the passenger seat for adjusting the height. Pull the lever to adjust the seat height. Approximately maintain a distance of one to two fists between your head and the car roof, ensuring that your eye level is slightly above the center of the vertical distance of the front windshield. Your feet should fully depress the clutch and brake pedals; when holding the steering wheel, your arms should be slightly bent for an optimal position. The backrest angle should be adjusted reasonably—not too reclined nor too upright. In an emergency, an improper angle may increase the risk of injury from airbags.
7
1
Share

What Causes the Malfunction of Steering Wheel Sound Control Buttons?

The reasons for the malfunction of steering wheel sound control buttons include functional failure, mechanical failure, circuit failure, or connector failure. Functional failure: Generally, the multifunction steering wheel of a vehicle includes functions such as multimedia volume adjustment, Bluetooth phone calls, and multimedia track navigation. Solution: When these functions fail or behave abnormally, you can manually operate the multimedia buttons on the center console or the corresponding function buttons/knobs on the touchscreen to verify if it is a functional failure. Mechanical failure: Buttons are consumable components that wear out during use, leading to a shortened lifespan. It cannot be ruled out that functional failure and uncontrollable quality are caused by poor quality, unreasonable design, or immature manufacturing processes. Solution: When the first functional verification passes, you can focus on troubleshooting the buttons. Circuit failure or connector failure: Buttons have corresponding matching circuits and connectors/plugs for electronic and electrical connections with the center console. Unsuitable usage environments can accelerate connector oxidation, wire aging, and button contact oxidation, all of which can lead to button failure. Solution: It is recommended to use specialized electronic instruments to check for any abnormalities in the circuit connections.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.