What are the dimensions of the new Xiao Si's body?

1 Answers
Mendoza
07/30/25 12:59am
The new Xiao Si has a body length, width, and height of 4525mm, 1852mm, and 1685mm respectively, with a wheelbase of 2640mm. The GAC Trumpchi GS4 is positioned as an international new-generation SUV and was officially launched on April 18, 2015, with a total of 8 models introduced. The GAC Trumpchi GS4 is equipped with a new 1.5T engine, featuring MacPherson independent front suspension and multi-link independent rear suspension, providing decent shock absorption. The front and rear tire specifications of the GAC Trumpchi GS4 are 215/60R17, with a non-full-size spare tire of specification T155/90D16.
Was this review help?
4
2
Share
More Forum Discussions

What brand is the Edge 8AT transmission?

It uses Ford's own brand transmission. Here is the relevant information: 1. In terms of appearance, the Edge follows the design style of the overseas model Escape, which is Ford's latest design language. The family-style large grille combined with rounded headlights similar to Porsche gives it high recognition. Additionally, it comes in both a standard version and an ST-LINE version, with an overall strong sporty feel. The dynamic and youthful design resembles a taller version of the Focus. 2. The powertrain is a highlight of the Edge, featuring the fourth-generation 2.0T-Ecoboost engine across the lineup, with a maximum output of 248 horsepower and a maximum torque of 393 Nm. This engine has excellent parameters and delivers outstanding real-world performance.
3
2
Share

Is the Toyota Corolla equipped with a timing belt or chain?

The current Corolla uses a timing chain. Here is the relevant information: 1. Refer to the vehicle manual and maintenance guide for details on the mileage and time intervals for replacing the timing belt. Timing belts have been used in engines for a long time, with mature technology, lower costs, and less noise, but they require regular inspection and maintenance, typically needing replacement every 50,000 to 100,000 kilometers. 2. Timing chains offer significant advantages such as compact structure, high power transmission efficiency, high reliability and wear resistance, and are maintenance-free for life. However, compared to traditional timing belts, they generally produce slightly more noise.
8
4
Share

Does stalling an automatic transmission in Drive (D) gear harm the car?

No impact on the vehicle. Here's relevant information: 1. For automatic transmission vehicles during driving, it's generally impossible to stall the engine in Drive (D) gear. If it occasionally stalls while still in D gear, there's no harm to the car - the only consequence is you can't remove the key unless in Park (P) gear. Simply power on and shift to P gear afterward. 2. Many modern vehicles feature automatic start-stop systems where the engine automatically shuts off when braking for over one second at traffic lights (while remaining in D gear), which is completely normal as the computer handles all background operations. The engine automatically restarts when you press the accelerator again.
14
4
Share

How to turn on the fog lights on the Tayron?

First, rotate the knob to the position of the position lights, then pull it out once to turn on the front fog lights, and pull it out again to turn on both the front and rear fog lights. Here is some related information: 1. Fog lights, installed at the front and rear of the car, have strong light penetration, which can improve the visibility of the driver and surrounding traffic participants, allowing oncoming vehicles and pedestrians to spot each other from a greater distance. There are generally two operation methods for car fog lights: button and rotary. 2. Button-operated fog lights: Some vehicles turn on the front and rear fog lights via buttons, meaning there are fog light buttons marked near the instrument panel. After turning on the lights, press the front fog light button to illuminate the front fog lights; press the rear fog light button to illuminate the rear fog lights.
20
2
Share

How to Check the Oil Level in an Audi A4L?

Audi A4L is equipped with an electronic oil dipstick. To check the oil level, you need to view it through the radio or MINI screen. Park the car on a level surface, press the CAR button, select Oil-level, and then let the car reach operating temperature. Let it idle for a while, then turn off the engine. Wait for 2 seconds to see the oil level. Here are some additional details: 1. If the oil column is close to the min mark, it means you need to add oil. When performing maintenance at a service center, a special tool T40178 is required to check the oil level. When the engine is cold, turn off the engine, open the hood, locate and open the oil cap, adjust the T40178 oil level tool to the standard scale corresponding to the engine, and then read the measurement. 2. Due to varying driving conditions, the first 5,000 km usually consume relatively more oil, with an oil consumption rate of 0.5L/1,000 km. It is recommended to frequently refer to the Audi A4L owner's manual, which contains detailed instructions.
10
5
Share

How to Remove the Water Pump on a Cruze?

The steps to remove the water pump on a Cruze are as follows: 1. Removing the pump cover: First, unscrew the connecting nuts between the pump cover and the pump body. Then, tap the pump cover gently with a pure copper rod using a hammer to remove it. If there are ejector bolts, use them to push out the cover. 2. Removing the impeller: Unscrew the impeller nut and lightly tap around the impeller with a wooden or lead hammer to remove it. If the impeller is rusted onto the shaft, soak it with cleaning oil or gasoline before removal. 3. Removing the pump body: First, unscrew the connecting nuts between the pump body and the bracket, then remove the pump body. Next, remove the packing gland and take out the packing inside the stuffing box. 4. Removing the pump shaft: First, remove the front and rear bearing covers on the bracket bearing housing. Then, tap the shaft from the front toward the rear (coupling direction) with a pure copper rod to remove the shaft. During the disassembly process, take care not to damage the shaft, and store the removed parts in an orderly sequence.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.