What are the dimensions of the Mercedes-Benz S400?

1 Answers
IsabellaAnn
07/29/25 4:20pm
The length is 5246mm, the width is 1899mm, and the height is 1498mm. Exterior Design: The front part follows the family style changes of recent years, featuring a larger and more sharply contoured lower edge of the radiator grille. The rear part removes the body-colored trim on the taillight assembly, replacing it with a full LED light group, combined with the design of the reverse light assembly. This retains the original style of the two decorative strips while providing better lighting effects at the rear. Powertrain System: The hybrid version system, commonly referred to in the market as a hybrid electric system, indicates that its powertrain has more than one power source, allowing users to mix and use them.
Was this review help?
10
0
Share
More Forum Discussions

What type of trains are designated with G and D prefixes?

G-prefixed trains are called high-speed rail (HSR), while D-prefixed trains are electric multiple units (EMUs). The differences are as follows: 1. Price: The first distinction between the two is the ticket price. Passengers who have taken both types of trains will notice that even for the same destination, the ticket prices differ—HSR tickets are more expensive, while EMU tickets are cheaper, sometimes with a significant gap. In fact, EMUs are still quite efficient, just slightly slower than HSR. 2. Speed: HSR operates at speeds of 300-350 km/h, making it the fastest among all trains. Although China did not invent HSR, it has developed it to the highest standard. D-prefixed EMUs are also fast but slower compared to HSR, typically arriving at least half an hour later. For shorter distances, the time difference may be smaller. 3. Seating: HSR only offers seated tickets—if seats sell out, no more tickets are available. EMUs, however, offer both seated and standing tickets, which may lead to more crowded conditions. This is one reason why EMU tickets are cheaper than HSR tickets.
2
4
Share

Which is More Important: Transmission or Engine?

Transmission is more important. Both the engine and transmission are indispensable key components of a vehicle. High surface parameters of an engine cannot solely determine outstanding power performance. It is the synergistic cooperation of every link in the drivetrain that ultimately defines the upper limit of a vehicle's power performance. Relevant details are as follows: 1. Function of the engine: A machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines, steam engines), and electric motors. For example, an internal combustion engine typically converts chemical energy into mechanical energy. The term 'engine' can refer to both the power generation device and the entire machine including the power unit. 2. Classification of transmissions: Vehicle transmissions are divided into manual and automatic types. Manual transmissions mainly consist of gears and shafts, achieving speed and torque variation through different gear combinations. Automatic transmissions (AT), on the other hand, comprise a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque variation via hydraulic transmission and gear combinations.
16
0
Share

Is 14L/100km Fuel Consumption High?

14L/100km is considered relatively high fuel consumption, as most vehicles on the market typically achieve 7 to 8L/100km. 14L/100km means the vehicle consumes 14 liters of fuel per 100 kilometers traveled. Here are specific details about fuel consumption: 1. Driving Habits: If the driver adopts a gentle driving style, the vehicle's fuel consumption will be lower. Conversely, aggressive driving leads to higher fuel consumption. When driving, it's advisable to press the accelerator lightly and avoid unnecessary overtaking. Keeping an eye on the road ahead allows you to release the accelerator early when encountering traffic and change lanes in advance. 2. Road Conditions: Frequent driving in congested urban areas results in higher fuel consumption. In contrast, driving on smooth elevated roads or highways leads to lower fuel consumption. In urban driving, frequent stops at traffic lights and traffic jams are common. During these stops, although the vehicle's mileage doesn't increase, the engine continues to run, thereby increasing the fuel consumption per 100 kilometers.
15
4
Share

What is the circumference of a 26-inch tire?

26-inch bicycle wheel circumference = 3.14*26*25.4 = 2074 (millimeters). Conversion of bicycle wheel circumference, unit MM. 26x1=1973, 26x1.5=2026. 26x1.6=2051, 26x1.75x2=2070. 26x1.9=2089, 26x1.95=2075. 26x2.00=2114, 26x2.125=2133, 26x13/8=2105. 26x13/8x11/2=2086, 26x3/4=1954. 26x2.1=2090. Relevant information about tubeless tires is as follows: 1. Introduction: Tubeless tires, also known as 'low-pressure tires' or 'pneumatic tires,' have high elasticity and wear resistance, along with good adhesion and heat dissipation performance. Especially, all-steel radial tubeless tires are economical and durable. 2. Scope of application: In recent years, tubeless tires have been increasingly used in bicycles, motorcycles, cars, buses, and trucks.
6
4
Share

What does it mean when a dripping kettle is displayed on the car dashboard?

When a dripping kettle is displayed on the car dashboard, it refers to the engine oil indicator light, which is used to show the oil pressure condition inside the engine. Proper oil pressure is essential to ensure that oil is delivered to all the friction surfaces of the engine. If the pressure is too high or too low, it can affect the normal operation of the engine and even cause damage to engine components. If the oil light comes on, you should stop the vehicle immediately to identify the cause and, if necessary, take it to a 4S shop for inspection. Reasons for the engine oil indicator light to come on: 1. Insufficient oil quantity reduces the oil pump's output, or air entering the pump prevents it from pumping oil, leading to a drop in oil pressure; 2. Overheating of the engine can thin the oil, causing it to leak excessively through the gaps and resulting in a drop in oil pressure; 3. A clogged oil filter or oil suction screen can also reduce oil pressure.
19
5
Share

What does it mean to revoke and cancel a driver's license?

Cancelation refers to the legal termination of a driver's license when it expires or when circumstances arise that no longer comply with legal regulations. Revocation of a driver's license refers to the situation where, after obtaining the license, the holder engages in actions that legally warrant the license being revoked. Below is additional information: 1. Specific circumstances for revoking a driver's license: Driving under the influence of alcohol or being penalized for drunk driving more than twice, involvement in major traffic accidents, or other violations of the "Road Traffic Safety Regulations" will result in the license being revoked according to the law. The applicant will not be allowed to apply for a motor vehicle driving permit for two years. 2. Procedure for canceling a driver's license: To cancel a driver's license, one can immediately go to a driving school, pay the fee, and retake the driving test. Revocation refers to the situation where, after legally obtaining a driver's license, certain legal circumstances arise that require the license to be revoked, such as being responsible for more than half of the liability in a major traffic accident, which by regulation should result in the revocation of the driver's license.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.