···
Log in / Register

What are the dimensions of the Mercedes-Benz GLE?

3 Answers
VonMackenzie
07/30/25 1:08am
The length, width, and height of the Mercedes-Benz GLE are 4941mm, 2018mm, and 1782mm respectively, with a wheelbase of 2995mm. Below is a related introduction to the Mercedes-Benz GLE: 1. In terms of power, the Mercedes-Benz GLE uses two engines, one is a 2.0-liter turbocharged engine, and the other is a 3.0-liter turbocharged engine. The 2.0-liter turbocharged engine has a maximum power of 190kw, a maximum torque of 370 Nm, a maximum power speed of 6100 rpm, and a maximum torque speed range of 1800 to 4000 rpm. The 3.0-liter turbocharged engine has a maximum power of 270kw, a maximum torque of 500 Nm, a maximum power speed range of 5500 to 6100 rpm, and a maximum torque speed range of 1600 to 4500 rpm. 2. In terms of suspension, the Mercedes-Benz GLE uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
Was this review help?
13
5
Share
EmeryRose
08/15/25 6:40am
I drove the Mercedes-Benz GLE for a while, with dimensions of 4930 mm in length, 1930 mm in width, and 1790 mm in height, and a wheelbase of around 2995 mm. These numbers may sound large, but in reality, the interior space is quite impressive. The second row can comfortably seat three people without any pressure, and the trunk can easily accommodate luggage for a family trip. When driving in the city, the body is a bit wide, making it easier to find a large parking spot. On the highway, it handles turns very stably without feeling floaty. I think this size is particularly suitable for family use, making trips with the family comfortable. However, be cautious when parking in narrow alleys or old garages to avoid scrapes—it's advisable to measure the space beforehand. Overall, it strikes a good balance between practicality and driving experience.
Was this review help?
13
2
Share
Expand All
CoreyDella
10/20/25 5:21am
As someone who enjoys car techniques, I pay attention to details. The Mercedes-Benz GLE has precise dimensions: 194 inches in length, 76 inches in width, and 70 inches in height, with a wheelbase of approximately 118 inches. These measurements significantly impact handling—a longer wheelbase ensures stability at high speeds and a manageable turning radius, preventing tailspin on suburban roads or curves. The wheel track balances grip, though the wider body may cause slight sway in windy conditions. These dimensions also affect fuel efficiency and performance, showcasing a clever overall design. Compared to peers like the BMW X5, it has a similar length but is slightly wider. I often analyze such data to aid in car selection, as the right dimensions make daily driving both safe and enjoyable.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

Where is the tachometer sensor located on the Mitsubishi Pajero?

The tachometer sensor on the Mitsubishi Pajero is located at the lower part of the cylinder block and is of the electromagnetic induction type, used to detect the rotational speed of the crankshaft. The speed sensor is a device that converts the rotational speed of an object into an electrical output. It is an indirect measurement device and can be manufactured using mechanical, electrical, magnetic, optical, or hybrid methods. Based on the signal form, speed sensors can be categorized into analog and digital types. The Mitsubishi Pajero is an imported ORV (Off-Road Vehicle) introduced by Mitsubishi Motors Corporation of Japan. It is an SUV with dimensions of 4695mm in length, 1815mm in width, and 1790mm in height. The Mitsubishi Pajero features a body-on-frame design, with a relatively high rear window and a triangular tail window design. The side body lines are segmented, and there is a significant gap between the front and rear wheels and the body. The wheel design is quite novel, featuring six double-spoke, dual-color straight columnar designs, giving the entire vehicle a dynamic appearance.
7
1
Share

What to Do When the Rear Door of the Car is Dented?

Solutions for a dented rear car door: You can take it to a repair shop for panel beating and repainting. Automotive panel beating can restore the deformed parts of the car's outer shell. For example, if the car's outer shell has a dent, panel beating can return it to its original shape. Then, by applying specialized paint, the deformed metal surface of the car can be restored to match the undamaged areas, making it look as good as new. You can also purchase a dent repair kit. First, clean the dented area thoroughly. Then, load the special glue into the glue gun and plug it in to preheat for about 7 minutes. Next, choose an appropriate pad—note that larger dents require larger pads, as bigger pads provide greater traction. Apply the glue evenly on the pad using the glue gun and quickly press it onto the dented area. Hold it gently until the glue sets firmly. Align the hole in the center of the pull bridge with the firmly attached pad, place the nut onto the screw rod of the pad, and tighten it. Continue turning the nut until the dent is pulled out and leveled. After the repair is complete, remove the tools, spray alcohol on any residual glue on the car body, and finally clean it off with a scraper.
3
5
Share

What Causes the Noise When Pressing the Brake in P Gear?

p> The noise when pressing the brake in P gear is caused by rust on the brake disc or brake pads, or new brake pads. The specific reasons are as follows: Rust on the brake disc or brake pads: After parking for a long time, especially in humid weather or after rain, some rust or dirt may appear on the brake disc or brake pads. This issue can usually be resolved by driving for a while, or by applying butter or special lubricating oil to the connection between the brake pads and the brake caliper. New brake pads: A similar noise may occur when pressing the brakes in a new car. If it's a new car or the brake pads have just been replaced, the new brake pads and brake disc need a break-in period. This noise is completely normal during this process.
15
1
Share

Are Vehicle Inspection Offices Open on Saturdays and Sundays?

The vehicle management offices are not open on Saturdays and Sundays, as these are statutory holidays. They operate only from Monday to Friday. Below is an introduction to the annual inspection procedures: Early Processing of Annual Inspection Procedures: The annual inspection procedures for motor vehicles must be processed in advance to avoid affecting the normal use of the vehicle. Motor vehicle annual inspections are divided into non-roadside inspections and roadside inspections, primarily determined by the specific vehicle type. Methods of Motor Vehicle Annual Inspection: There are two methods for motor vehicle annual inspections. The first method is through the Traffic Management 12123 inspection, which is limited to motor vehicles that do not require roadside inspections. The second method is through the vehicle management office or the traffic management department of the public security authorities, which is applicable to all motor vehicles.
10
2
Share

Should the Landwind X7 use 92 or 95 octane gasoline?

According to the official vehicle manual recommendation, the Landwind X7 should use 95 octane gasoline. In addition to checking the suitable gasoline grade in the vehicle manual, the Landwind X7 can also refer to the label on the fuel tank cap. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the gasoline grade cannot be solely determined by the compression ratio. High compression ratio engines can also be tuned to use lower octane gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Landwind X7 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Due to the significantly lower octane value, the gasoline's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug ignites during the compression stroke, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it only increases noise without obvious damage to the engine. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
14
3
Share

Will points be deducted for not wearing seat belts in the back seat on highways?

Not wearing seat belts in the back seat on highways will not result in point deductions, only a fine. The penalties for not wearing seat belts are as follows: Driver not wearing a seat belt: When driving on highways, if the driver does not use the seat belt as required, a fine will be imposed, and 2 points will be deducted; when driving on urban expressways, if the driver does not use the seat belt as required, a fine will be imposed, and 2 points will be deducted; when driving on roads other than highways or urban expressways, if the driver does not use the seat belt as required, a fine will be imposed, but no points will be deducted. Front passenger not wearing a seat belt: According to the Road Traffic Safety Law, when a motor vehicle is in motion, the front passenger should also use a seat belt. The requirement for front passengers to wear seat belts was clearly stipulated in the old traffic regulations. If a front passenger does not wear a seat belt, the on-duty traffic police can impose a fine on the passenger.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.