What are the dimensions of the Mercedes-Benz E300 model?

1 Answers
MacPhoebe
07/29/25 6:10pm
The dimensions of the Mercedes-Benz E300 are divided into length, width, and height: 1. Length is 5012mm; 2. Width is 1855mm; 3. Height is 1464mm; Here is an introduction about the Mercedes-Benz E300: The new generation Mercedes-Benz E-Class has dimensions of 5012mm in length, 1855mm in width, and 1464mm in height. Since the long-wheelbase model is 140mm longer than the prototype, reaching 3014mm; the interior space after the extended wheelbase is very ample, improving the comfort of both front and rear seats. The new generation Mercedes-Benz E-Class sedan has recently been officially introduced to the domestic market as an imported model, with the first two models being the Elegance and Fashion versions of the new E300.
Was this review help?
14
0
Share
More Forum Discussions

Is it necessary to install suspension stiffness adjustment?

Suspension stiffness adjustment is necessary to install. Suspension stiffness adjustment: Suspension stiffness adjustment refers to adjusting the comfort level of the vehicle's suspension. The suspension is the general term for all the force-transmitting connection devices between the car's frame and axle. Function of suspension stiffness adjustment: Suspension stiffness adjustment works by controlling the adjustment valve on the shock absorber through the control unit, thereby regulating the internal hydraulic circulation of the shock absorber to change its damping coefficient. Its role is to transmit forces and torques between the wheels and the frame, cushion the impact from uneven road surfaces to the frame or body, and reduce the resulting vibrations to ensure smooth driving. Suspension stiffness adjustment modes: The suspension stiffness adjustment modes are: Normal, Sport, and Comfort modes.
16
4
Share

Does Wheel Repair Affect the Wheel?

It depends on the situation. If the wheel is only slightly damaged, then repairing it will have no impact. However, if the damage is severe, even after repair, it may cause poor balance, affecting the overall driving experience. Below is relevant information: 1. Minor Damage: If the car's wheel is only slightly damaged, then repairing it is generally not a problem. Even after repair, the owner does not need to worry about any issues with the wheel. 2. Severe Damage: If the wheel is severely damaged, it is not recommended to repair it, as this often leads to a series of problems during subsequent driving. It may also increase the car's overall fuel consumption, providing no real benefit to the owner. Although replacing the wheel requires spending some money, this expense is worthwhile as it usually restores the owner's driving experience to its original state.
17
0
Share

What kind of adhesive is used to attach the windshield rearview mirror?

Windshield rearview mirrors can be attached using sheet metal adhesive or glass adhesive. Introduction to glass adhesive: Glass adhesive is a material used for bonding and sealing various types of glass to other substrates. It is mainly divided into two categories: silicone adhesive and polyurethane adhesive (PU). Silicone sealant is glass adhesive, which is further divided into acidic and neutral types. Neutral adhesives include stone sealant, mildew-proof sealant, fireproof sealant, and pipe sealant. Curing time introduction: The curing process of silicone adhesive progresses from the surface inward. Different types of silicone have varying surface drying and curing times, so any surface repairs must be done before the glass adhesive surface dries (generally within 5-10 minutes for acidic and neutral transparent adhesives, and within 30 minutes for neutral colored adhesives). If masking tape is used to cover an area, it must be removed before the outer skin forms after applying the adhesive.
3
0
Share

How to Use the Cruise Control in Mitsubishi Outlander?

When the speed of the Mitsubishi Outlander exceeds 40 km/h, the cruise control can be activated. Once the desired speed is reached, pressing the 'set' button will maintain the current speed. More details about the cruise control in Mitsubishi Outlander are as follows: 1. The cruise control function allows the car to maintain a constant speed. 2. The fuel supply to the car's engine is controlled by the onboard computer, which can adjust the fuel supply based on road conditions and the car's speed. This ensures the car maintains a steady speed without the need to operate the accelerator. Due to its convenience and safety at low speeds, cruise control has become a standard feature in mid-to-high-end vehicles. 3. It is important to note that the cruise control function can only be activated when the speed is above 40 km/h. The function is automatically canceled when the brake is applied. This feature is particularly useful for driving on highways with light traffic, as it helps reduce driver fatigue.
13
3
Share

What does the blue light on a car mean?

Car blue lights have two meanings: low vehicle coolant temperature and high beam indicator. Here are the detailed information about car blue lights: Blue coolant temperature light: Indicates the coolant temperature is too low. If it lights up blue when starting the car, it's normal and will turn off after the engine warms up; if it stays blue continuously, there might be an issue requiring inspection at a repair shop. The blue coolant temperature light indicates low temperature - it will turn off after driving for a while or idling until the temperature rises; red indicates high temperature and the vehicle should not continue driving. The blue or green coolant temperature indicator on the dashboard is a normal low-temperature warning light, showing the engine has just started and is warming up. Avoid aggressive driving during this period as low temperature can cause severe engine wear. The light will turn off when reaching optimal operating temperature. High beam indicator: When the vehicle's high beams are activated, a blue symbol will light up as a normal indicator.
20
1
Share

What does 400cc mean for a motorcycle?

Motorcycle 400cc refers to the displacement of the motorcycle engine being 400 milliliters. 400cc represents the displacement, which is the cylinder volume of the engine, measured in milliliters. Displacement is a key parameter of an engine; the larger the displacement, the stronger the power, but the fuel consumption is also relatively higher. Additional information: 1. Chinese national standards and traffic regulations: Fuel-powered bicycles have a displacement below 30cc, 30-50cc are classified as light motorcycles, and above 50cc are considered motorcycles. 2. A motorcycle consists of five main parts: the engine, transmission system, running gear, steering and braking systems, and electrical instrumentation equipment. 3. The spark plug is a critical component of a motorcycle engine. The normal combustion of the air-fuel mixture is essential for the engine's proper operation. Firstly, each type of engine uses a different spark plug model, mainly differing in heat value and thread size, so it is crucial to use the specified spark plug type.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.