What are the dimensions of the Maxus G50?

What is the difference between EV and PHEV?

EV stands for electric vehicle, while PHEV specifically refers to plug-in hybrid electric vehicles. Below are introductions to EV and PHEV: 1. EV: Electron-Volt, a unit of energy. It can also represent electric vehicles, enterprise value, management modules, etc. 2. PHEV: Refers to plug-in hybrid electric vehicles in the new energy vehicle category, specifically indicating hybrid vehicles that are charged via plug-in. They typically require dedicated charging piles for power supply. When the battery is sufficiently charged, the vehicle is driven by the electric motor; when the battery is low, the engine will participate in driving or power generation.

11

1

Share

How many seconds does the Trumpchi Empow take to accelerate from 0 to 100 km/h?

Trumpchi Empow's 0-100 km/h acceleration time is 6.95 seconds. Exterior Introduction: In terms of exterior design, the GAC Trumpchi Empow adopts the "Light Sculpture Surface" design language, offering two exterior styles: Sport version and Luxury version. The body dimensions are 4700mm*1850mm*1432mm. Specifically, the Sport version features a large hexagonal grille with a vertical waterfall-style design, along with two blue polygonal decorative elements resembling fighter jet air intakes inside the grille, accented with carbon fiber-like materials. Configuration Parameters: The Empow is equipped with the all-new third-generation 1.5TGDI engine from the GAC Power series, delivering a maximum power of 130kW and peak torque of 270N.m. With GCCS technology as its core, it integrates twin-scroll turbocharging, top-mounted water-cooled intercooler, high-pressure injection, large inertia balance shaft, intelligent thermal management, and low-friction technology, achieving a fuel consumption as low as 5.7L/100km. The transmission boasts an efficiency of up to 96%, with a shift time of just 0.2 seconds. In the 0-100km/h acceleration test, the fastest recorded time was 6.95 seconds.

19

1

Share

Why Should Coolant Be Replaced?

During long-term use, coolant inevitably deteriorates, leading to reduced performance in functions such as antifreeze and cooling. Additionally, failure to replace the coolant can cause corrosion of the car's metal pipes and even lead to radiator corrosion and leaks. The method for replacing coolant is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leaks or cracks in the pipes, with particular attention to the five-way water pipe. Coolant flows through the five-way pipe and is then distributed to different parts of the car to perform its functions. If there are signs of coolant leakage in this section, replace the water pipe or reseal the connection as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continuously inject water into the reservoir so that it flows through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir may have a faint pink tint. Continue adding clean water until the outflow is clear. Remember to remove the heater hose and drain the water from the heater core. Approximately one hour after draining, add the new coolant through the radiator hose. Then, add another container of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the cooling system. Add more coolant until the reservoir reaches the maximum mark "MAXT".

6

1

Share

What is the difference between a D license and an E license?

The differences between a D license and an E license are as follows: 1. The types of vehicles permitted to drive are different. 1. The permitted vehicle type for a D license is a regular three-wheeled motorcycle; the vehicles allowed to be driven are three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h. 2. The permitted vehicle type for an E license is a regular two-wheeled motorcycle; the vehicles allowed to be driven are two-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h. 2. With a D license, you are permitted to drive all vehicle types covered by D, E, and F licenses; with an E license, you are only permitted to drive all vehicle types covered by E and F licenses.

10

5

Share

Can You Turn Right When the Yellow Light is Flashing?

When the traffic light is red and you intend to turn right, vehicles from the left and right directions are free to pass. The lane you are entering has vehicles moving from left to right, which is the same direction as your turn. Therefore, turning right does not affect traffic flow, and you can turn right under any traffic condition, even if the light is yellow or red. This is typically in low-traffic areas as a warning to slow down and proceed with caution. Details are as follows: Traffic violations include: 1. Driving under the influence of alcohol; 2. Allowing an unlicensed person to drive a motor vehicle; 3. Driving an unregistered or unlicensed motor vehicle; 4. Misusing or transferring motor vehicle license plates or driving permits.

13

4

Share

What Causes Abnormal Noise When Pressing the Accelerator?

Abnormal noise when pressing the accelerator may be caused by excessive clearance in components such as the drive shaft, poor lubrication, or improper assembly during maintenance, which leads to friction sounds under high torque output. The following is an introduction to related content: Abnormal noises can be categorized based on their impact on vehicle performance into minor noises, moderate noises, and severe noises. Minor noises, such as sparking from high-voltage electricity leakage or slight looseness in rolling bearings, generally have low volume and cause minimal wear on components, with no significant changes over a long period. These issues can often be tolerated without immediate repair while maintaining normal vehicle operation. Moderate noises, such as those from flywheel bearings or clutch release bearings, have a noticeable impact on vehicle performance but can still maintain key technical functions in the short term. These noises are usually louder and involve greater component wear, so they should be repaired promptly.

2

Share

What are the dimensions of the Maxus G50?

What is the difference between EV and PHEV?

How many seconds does the Trumpchi Empow take to accelerate from 0 to 100 km/h?

Why Should Coolant Be Replaced?

What is the difference between a D license and an E license?

Can You Turn Right When the Yellow Light is Flashing?

What Causes Abnormal Noise When Pressing the Accelerator?

What are the causes of Skoda Octavia transmission failure?

What are the three required certificates for drivers?

How many colors does the Jetta VS5 have?

What is the Difference Between Energy-Efficient Vehicles and New Energy Vehicles?