What are the dimensions of the Land Rover Range Rover Evoque?

Will refueling after the nozzle automatically stops have any impact on the car?

Refueling after the nozzle automatically stops will not have a significant impact on the car. After the nozzle stops, wait a few seconds to allow the fuel vapor in the tank to slowly escape, slightly reducing the pressure. At this point, you can add a little more fuel to the tank. The reasons for the nozzle stopping during refueling and precautions are as follows: Reasons for the nozzle stopping during refueling: Vapor generation during refueling: When refueling, if the fuel flows too quickly from the nozzle, it can generate expanding vapor that doesn't have time to escape. If the carbon canister solenoid valve is closed at this time, the carbon canister will accumulate more and more gas, leading to fuel splashing, even though the car's fuel tank is not yet full. Precautions during refueling: Insert the nozzle as deeply as possible into the tank opening to prevent fuel from splashing out when the nozzle stops.

17

4

Share

What is the fuel consumption of the Grand Commander?

The comprehensive fuel consumption of the Grand Commander is 8.4-8.8L/100km. Additional information: 1. Fuel consumption generally refers to constant-speed fuel consumption. Constant-speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. 2. These types of vehicles include: 1) M1 category, M2 category with a maximum design total mass not exceeding 3.5 tons, and N1 category compressed natural gas vehicles; M1 category and N1 category vehicles with a maximum design total mass not exceeding 3.5 tons, tested according to the method specified in GB/T-12545.1-2008 "Test methods for fuel consumption of passenger cars". 2) M2 category, M3 category, N2 category, and N3 category compressed natural gas vehicles with a maximum design total mass exceeding 3.5 tons; M2 category, M3 category, and N category vehicles with a maximum total mass greater than or equal to 2 tons, tested according to the method specified in GB/T-12545.2-2001 "Test methods for fuel consumption of commercial vehicles".

7

2

Share

Why was the GL825S discontinued?

Buick GL825S was discontinued due to poor safety performance. Below are the specific details about the Buick GL825S: 1. In the IIHS safety tests in the United States, the American version of the GL8 received unsafe ratings in both the offset crash and whiplash tests, leading to its ban in the U.S. In the C-IASI crash tests, the Buick GL8 achieved only average scores in the 25% frontal offset crash and side impact tests, with very noticeable deformation in both the A and B pillars, further proving the vehicle's poor safety performance. 2. The Buick GL8 has a body length, width, and height of 5256/1878/1776mm, with a wheelbase of 3088mm. 3. The Buick GL8 is equipped with a 2.0T engine paired with a 9AT transmission, delivering a maximum power of 191kW and a maximum torque of 350Nm. The 0-100km/h acceleration time, as tested, is 8.76 seconds. The GL8 uses General Motors' 9AT transmission.

5

1

Share

How often should the transmission fluid be changed for the Magotan B8?

The transmission fluid for the Magotan B8 is generally recommended to be changed every two years or approximately 40,000 kilometers. The Magotan B8 is equipped with a 7-speed wet DQ380 transmission, with a maximum torque of 420 Nm. The replacement intervals for transmission fluid vary across different vehicle models. Replacement intervals for different transmissions: Manual transmission fluid is typically recommended to be changed every three years or approximately 100,000 kilometers; automatic transmission fluid is generally recommended to be changed every two years or approximately 40,000 kilometers; continuously variable transmission (CVT) fluid is usually recommended to be changed every two years or approximately 60,000 kilometers. Functions of transmission fluid: Reduces friction and wear, controls clutch friction and synchronizer performance; bears loads (low-speed high torque, vibration loads), dissipates heat, reduces vibration and noise, and cleans contaminants at gear meshing points (cleaning function); prevents corrosion, pitting, and surface metal tearing, isolates metal surfaces, and prevents direct contact between metal surfaces.

20

5

Share

What issues should be paid attention to when selling an old motorcycle?

Selling an old motorcycle requires the most attention to the motorcycle transfer procedures, followed by the inspection of the motorcycle's condition. Engine inspection: Check whether the engine body is damaged, whether the sealing is good, and whether there is oil leakage. Check whether the cylinder block and radiator fins are corroded or damaged. Listen to whether the sound of the engine during operation is crisp, whether the idle speed is stable, whether there are knocking sounds or other noises, and whether the vehicle body has abnormal vibrations. Check whether the engine speed rises instantly when the throttle is suddenly increased, and whether the speed drops quickly when the throttle is released. Electrical circuit and equipment inspection: Check whether the wiring is neat, whether it has been modified messily, whether the aging is severe, and whether there are any suspicious areas that could cause a short circuit. Verify whether the inductive electronic components and indicator lights are working normally, and whether the electric starter motor operates properly. Suspension inspection: Hold the front brake and push down on the handlebars to observe whether the front shock absorber sinks softly and returns smoothly. Check for any abnormal noises, stiffness, incomplete return, severe oil seal aging, oil leakage, wear on the fork tubes, or collision marks.

12

1

Share

How long is the built-in 4G network free for Haval F7?

Haval F7's built-in 4G network is free for 3 years, and users can renew the service at their own expense after expiration. Relevant information is as follows: 1. Functions: The Haval F7 is equipped with a mobile phone interconnection function, which cannot connect to functions like CarPlay or CarLife. Users need to scan a QR code to download Haval's own mobile phone interconnection application, which supports 48 mobile phone brands across Android and iOS systems. The mobile phone interconnection application can be used for making calls, navigation, and other functions. 2. App: Operate mobile apps on the car screen to keep driving applications online in real time. 3. Convenient and safe operation: Supports common functions such as steering wheel button operation. Deeply integrated with the car system, it does not conflict with in-car music or navigation. 4. Social features in the car: For weddings, moving, group travel, or gathering for appointments, users can check friends' locations in real time and engage in real-time voice intercom to stay with the group without falling behind.

6

1

Share

What are the dimensions of the Land Rover Range Rover Evoque?

Will refueling after the nozzle automatically stops have any impact on the car?

What is the fuel consumption of the Grand Commander?

Why was the GL825S discontinued?

How often should the transmission fluid be changed for the Magotan B8?

What issues should be paid attention to when selling an old motorcycle?

How long is the built-in 4G network free for Haval F7?

Should T-equipped cars use 30 or 40 oil?

What is the name of the SUV under Alfa Romeo?

What are the methods to remove film without damaging the heating wires?

What is the launch date of the Hongqi H9?