What are the dimensions of the Kaiyi Xuanjie?

2 Answers
SanKatherine
09/04/25 6:04am
Kaiyi Xuanjie has a body length, width, and height of 4400mm/1831mm/1653mm respectively, with a wheelbase of 2632mm. It is a compact SUV targeting young consumers. Below is a detailed introduction to the Kaiyi Xuanjie: Exterior: The vehicle features a stylish and dynamic design. The front face adopts the "Triumphant Wings" design language, with a refined and eye-catching silver grille trim. The sharp headlight design, combined with the wing-shaped middle grille, presents an expansive and elegant look, catering to both classic and avant-garde tastes. The multi-waistline design on the side of the body creates a muscular and sporty appearance. Interior: The Xuanjie adopts a wraparound cockpit design, balancing aesthetics and practicality. It offers two different interior styles: sporty cool black and dynamic red-black, providing users with varied choices. The high-quality soft-touch dashboard is made of premium molded materials, and the piano black lacquer panels combined with genuine stitched leather wrapping offer users a tangible, refined texture. Center Console Design: The design is well-layered, featuring a 10.25-inch full LCD instrument cluster and a 10.25-inch central control screen, exuding a strong sense of technology. It supports multi-screen linkage, built-in dash cam, 360° panoramic imaging, and intelligent voice interaction, allowing users to experience the charm of technology firsthand.
Was this review help?
12
0
Share
AnastasiaAnn
09/16/25 7:00am
The dimensions of the Kaiyi Xuanjie are quite suitable. After driving it for a while, I find it very practical. The body length is approximately 4.4 meters, the width is close to 1.83 meters, and the height is about 1.6 meters, with a wheelbase of 2630 mm, making it very convenient for city driving. Parking on the roadside or in mall garages is no problem. The long wheelbase means ample legroom inside, and three adults can sit in the back without feeling cramped; the trunk capacity is large enough, making it more than sufficient for daily shopping or weekend trips with luggage. The overall size design is ingenious, balancing agility and comfort. It handles lightly while driving and doesn’t feel unstable at high speeds, making it suitable for daily commutes and family use. The body isn’t too tall, so entering tunnels or parking in height-restricted areas is easy and stress-free.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

How to Determine Battery Quality?

You can judge the quality of a battery by observing the color changes of the battery indicator. Below is an introduction to batteries: 1. Basic Introduction: The main performance parameters of a battery include electromotive force, capacity, specific energy, and resistance. Electromotive force is equal to the work done by the non-electrostatic force when a unit positive charge moves from the negative electrode to the positive electrode inside the battery. 2. Battery Principle: In chemical batteries, the direct conversion of chemical energy into electrical energy is the result of spontaneous oxidation-reduction reactions occurring inside the battery. These reactions take place at the two electrodes. The negative electrode active material consists of reducing agents with a relatively negative potential that are stable in the electrolyte, such as reactive metals like zinc, cadmium, lead, and hydrogen or hydrocarbons. The positive electrode active material consists of oxidizing agents with a relatively positive potential that are stable in the electrolyte.
14
4
Share

What Wattage Motor is Compatible with Yuanqu 240?

Yuanqu 240 is compatible with a 1500W motor. More relevant information is as follows: Electric Motor: An electric motor consists of two basic parts, the stator (stationary part) and the rotor (rotating part), along with other accessories. The specific components may vary slightly depending on the type of motor. Stator: The stator is the stationary part of the motor. It is composed of three parts: the stator core, stator winding, and frame. The main function of the stator is to generate a rotating magnetic field, while the main function of the rotor is to be cut by the magnetic field lines and thereby generate (output) current. Rotor: According to ISO standards, a rotating body supported by bearings is called a rotor. Rotors are mostly the main rotating components in power machinery and working machinery. Typical rotors include turbine mechanical rotors, motor rotors, various pump rotors, and turbine compressor rotors, among others.
18
2
Share

What Causes Skoda Lighting Abnormalities?

Common causes of lighting abnormalities include bulb failure, fuse blowout, switch or relay damage, and circuit faults. During troubleshooting, the circuit should be inspected according to the wiring diagram to identify the faulty component. If multiple lights fail to illuminate: Press the horn - if it doesn't sound, the main fuse may have blown. If all bulbs on the same fuse circuit fail, the fuse may be blown. Before resetting the main fuse or replacing fuses, always investigate the cause of overload. Dim lighting is often caused by insufficient battery charge: Dim lighting is typically caused by low battery charge or alternator/regulator malfunction. Other potential causes include: loose or poor wire connections, undersized wiring or poor grounding, damaged diffusers or dirty reflectors, blackened bulb surfaces, insufficient wattage, or misaligned filaments not positioned at the reflector's focal point.
8
0
Share

What is the maximum speed limit on domestic highways?

The maximum speed on domestic highways must not exceed 120km/h, and the minimum speed must not be lower than 60km/h. Here are some precautions for driving on highways: 1. Use of turn signals: When a motor vehicle enters the highway from the ramp, the left turn signal should be turned on, and it should merge into the lane without hindering the normal driving of vehicles already on the highway. When a motor vehicle exits the highway, the right turn signal should be turned on, and it should enter the deceleration lane, reduce speed, and then exit. 2. Maintaining distance: When a motor vehicle is driving on the highway at a speed exceeding 100 kilometers per hour, it should maintain a distance of more than 100 meters from the vehicle in front in the same lane. When the speed is below 100 kilometers per hour, the distance from the vehicle in front in the same lane can be appropriately shortened, but the minimum distance must not be less than 50 meters.
4
4
Share

What is the reason for the clutch not disengaging?

The reason is that when the clutch pedal is fully depressed, there is difficulty in shifting gears, difficulty in shifting while driving, or even if the gear is barely engaged, the car starts moving before the clutch pedal is released. Here is an introduction about the clutch: 1. Introduction to the clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily separate and gradually engage the engine and the transmission, thereby cutting off or transmitting the power input from the engine to the transmission. 2. Function of the clutch: To ensure smooth starting of the car and achieve smooth gear shifting.
19
4
Share

How Long Should You Drive Before the First Car Maintenance?

Different car manufacturers specify different maintenance intervals for various models. It is recommended to refer to the vehicle's maintenance manual, which generally suggests maintenance every 3,000 or 5,000 kilometers. Below is some relevant information about car maintenance: 1. Introduction to Car Maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as vehicle servicing. 2. The Purpose of Car Maintenance: Modern car maintenance primarily includes servicing the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, among others. The goal of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down deterioration, and extend the vehicle's lifespan.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.