What are the dimensions of the Jeep Renegade?

2 Answers
StKeegan
07/30/25 1:12am
The dimensions of the Jeep Renegade are 4240mm in length, 1805mm in width, and 1730mm in height, with a wheelbase of 2570mm. In terms of configuration, the Renegade is equipped with side airbags, an active tire pressure monitoring system, a professional all-function electronic safety assistance system for 4WD SUV platforms, a unique brake assist failure compensation system in its class, a unique dynamic steering assist system in its class, an anti-lock braking system, an electronic brake force distribution system (EBD), and a traction control system. The engine in the Jeep Renegade delivers a maximum horsepower of 173Ps, a maximum power of 127kW, and a maximum torque of 270Nm.
Was this review help?
5
5
Share
DeDaniel
08/15/25 6:46am
I have been driving the Renegade for almost four years, and its size is very practical. With an overall length of about 4250 mm, a width of 1805 mm, and a height of 1720 mm, this size makes it highly maneuverable in urban driving, and parking is not as troublesome as with larger vehicles. The wheelbase is approximately 2570 mm, providing ample rear legroom, ensuring that family and friends won't feel cramped in the back seats, and offering good comfort on long trips. The trunk capacity is also decent, with more than enough space for luggage or shopping bags. The minimum ground clearance is over 180 mm, making it easy to handle rough road conditions. It balances daily commuting and light off-road needs well, delivering a stable and comfortable ride without much bumpiness.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

What is the relationship between ZF and BMW?

BMW is ZF's largest customer, with most of its models using ZF transmissions, while only a small portion of front-wheel-drive vehicles use Aisin transmissions. Below is an introduction to BMW and ZF: Overview of BMW: Founded on March 7, 1916, BMW is one of the world's renowned automobile companies and a leader in the premium car manufacturing industry. It has four model series: i, X, Z, and pure numbers, along with series such as 1, 2, and 3, as well as the M series (BMW's official high-performance modification division) based on improvements to these series. Overview of ZF: ZF Friedrichshafen AG is headquartered in Friedrichshafen, Germany, and is a Fortune Global 500 company. It is a global partner and supplier of automotive components, specializing in providing transmission, steering, and chassis systems for automobiles.
13
2
Share

Why does the brake pedal feel harder than before?

The main reasons why the brake pedal feels harder than before are: failure of the brake booster pump resulting in loss of assistance; clogged vacuum tube; sticking of the master cylinder or wheel cylinder; clogged brake fluid line. Below are detailed explanations: Booster pump failure: The force applied to the brake pedal needs to be amplified by the brake booster pump. If the vacuum booster pump leaks or malfunctions, braking will become difficult. Clogged vacuum tube: A clogged engine vacuum tube leads to loss of brake assistance, making the brake pedal feel harder. Sticking master cylinder or wheel cylinder: If the master cylinder or wheel cylinder sticks, the entire braking system will fail to function properly, resulting in a hard brake pedal. Clogged brake fluid line: The primary cause of a clogged brake fluid line is aged or deteriorated brake fluid, which leads to reduced hydraulic pressure and a harder brake pedal.
8
5
Share

What Causes the Spring Contraction Sound When Braking?

Braking with a spring contraction sound is a normal noise when the ABS is operating, so there's no need to worry. When the ABS system is active, the ABS indicator light on the dashboard will flash. Below is relevant information about the ABS system: The Anti-lock Braking System (ABS) consists of components such as the ABS module, ABS master cylinder, hydraulic pipes, and wheel speed sensors. During vehicle braking, it automatically controls the braking force to prevent wheel lock-up, maintaining a state where the wheels are both rolling and sliding (with a slip ratio around 20%) to ensure maximum traction between the tires and the road surface.
9
0
Share

Will the Engine Stall When Braking and Releasing the Clutch?

If the gear is in neutral, braking and releasing the clutch will not cause the engine to stall. However, if the vehicle is in gear and the clutch is fully released, the engine will stall. This is determined by the characteristics of the clutch. Below is relevant information about the clutch: Introduction: The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. Function: During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission. The clutch is a common component in mechanical transmission systems, allowing the drivetrain to be separated or engaged at any time. Basic requirements for the clutch: smooth engagement, quick and thorough separation; easy adjustment and repair; compact size; lightweight; good wear resistance and sufficient heat dissipation capacity.
1
3
Share

Why does my foot shake involuntarily when depressing the clutch?

Involuntary foot shaking when depressing the clutch is usually caused by incorrect sitting posture, which puts excessive strain on the legs and feet, or it may result from the driver being overly nervous. Here are some clutch operation techniques: Maintain proper sitting posture: Adjust the driver's seat properly, lean back against the seat, relax back muscles, keep arms slightly bent, hold the steering wheel naturally, and maintain some knee bend when depressing the clutch pedal. Correct pedal operation: Place the ball of your foot on the clutch pedal with the heel moving backward along the leg; during the final release stage of the clutch (when the vehicle just begins to move), you can use the grounded heel as a pivot point and adjust clutch engagement with ankle movement. This can reduce leg shaking and make it easier for beginners to control the clutch.
4
1
Share

What's the reason for no response when stepping on the accelerator?

If the car's accelerator pedal doesn't respond when pressed, it indicates an abnormality in the vehicle's power system. The engine's power is generated through the coordinated operation of the intake system, ignition system, and fuel system. If any of these components malfunctions, it could lead to a decrease in engine power, resulting in no response when the accelerator is pressed. Here is some additional information: The accelerator, also known as the "throttle" or "gas pedal," is a control device that regulates the engine's power (thrust). In gasoline engines, the accelerator doesn't control the fuel injection quantity but rather the opening degree of the throttle valve. A smaller opening means less air-fuel mixture enters the cylinders, resulting in lower engine power output, and vice versa.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.