What are the dimensions of the Honda Haoying in terms of length, width, and height?

3 Answers
DelLukas
07/29/25 3:00pm
Honda Haoying's dimensions in length, width, and height are 4634mm/1855mm/1679mm, which are official data. The length of the Honda Haoying refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the Honda Haoying has a maximum power of 142kW and a maximum torque of 243Nm. This engine reaches its maximum power at 5600 rpm and its maximum torque between 2000 and 5000 rpm. It is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a continuously variable transmission. The state has relevant regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, the state stipulates that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
Was this review help?
9
1
Share
LaKira
08/13/25 7:37am
After comparing multiple mid-size SUVs, the dimensions of the Breeze are particularly noteworthy. This vehicle measures 4716mm in length, 1866mm in width, and comes in two height versions: 1691mm and 1681mm depending on the configuration. The wheelbase reaches 2701mm, significantly longer than the previous model. It drives very steadily and boasts surprisingly high space utilization. The rear seats can comfortably accommodate three adults without feeling cramped, with ample legroom. The trunk has a depth of nearly one meter, easily fitting strollers and tents for camping trips with two kids. Just be mindful of the width when parking, as some mall parking spaces might be a tight fit for the side mirrors, but the 360-degree panoramic camera can help.
Was this review help?
6
1
Share
Expand All
LaFaith
10/11/25 5:56am
Driving the Breeze is always a breeze when picking up the kids, thanks to its perfectly proportioned dimensions. With a length of 4716mm, width of 1866mm, height of 1691mm, and a 2700mm wheelbase, it handles lane changes in the city much more nimbly than the Tiguan. Even with the seat adjusted to its lowest position, the view remains expansive. The best part is that the rear seats can be folded flat to create a mobile bed—it was so comfortable that I even slept in it during my last camping trip. The wheel arches are cleverly designed, allowing rear passengers to stretch their legs naturally without having to sit awkwardly like in some other cars. The roofline slopes downward for a sporty look, yet it doesn’t compromise headroom at all.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

Can the Bubbled Rear Window Film Be Removed?

Bubbled rear window film can be removed. Bubbles in the film can obstruct the driver's view, and timely removal and replacement can enhance driving safety. Bubbles in the rear window film can result from improper installation techniques or prolonged heating, causing expansion and contraction that leads to bubbles. It is recommended to remove and reapply the film. Areas for car window film application include: front windshield film, rear windshield film, side window film, and quarter window film. The benefits of car window film are: 1. Heat insulation and sun protection to reduce interior temperature; 2. UV blocking to slow down the aging of car interiors; 3. Preventing injuries from accidental glass shattering; 4. Creating a private space; 5. Reducing air conditioning consumption; 6. Enhancing aesthetics; 7. Reducing glare.
9
3
Share

Why Can't I Engage Reverse Gear in a Manual Transmission?

The reasons for being unable to engage reverse gear in a manual transmission are: 1. The clutch is not fully depressed; 2. The transmission has malfunctioned; 3. The gear teeth happen to align; 4. The car temperature is low, and the transmission oil is not fully lubricated; 5. The vehicle speed and gear position do not match. A manual transmission car uses a manual shift mechanical transmission to adjust the vehicle speed, where the driver manually moves the gear lever to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed change. The gear positions in a manual transmission car are: 1. 1st gear is the starting gear: used for vehicle start-up; 2. 2nd gear is the passing gear: used for navigating complex road surfaces and handling complex situations; 3. 3rd gear is the transition gear: used for low-speed driving on urban roads; 4. 4th gear is the driving gear: used for prolonged high-speed driving; 5. 5th gear is the high-speed gear: used for long-distance highway driving.
10
5
Share

What does Dual VVT mean?

Dual VVT separately controls the engine's intake and exhaust systems. During rapid acceleration, the intake VVTi advances the intake timing and increases valve lift, while the exhaust VVTi delays the exhaust timing. This effect is similar to a small turbocharger, effectively enhancing engine power. Additionally, the increased air intake ensures more complete combustion of gasoline, achieving the goal of low emissions. The maintenance methods for a Dual VVT engine are: 1. Maintain good crankcase ventilation; 2. Regularly change the oil and filter; 3. Periodically clean the crankcase; 4. Regularly clean the radiator; 5. Periodically clean the fuel system; 6. Use lubricants appropriately.
19
5
Share

Where to Add Transmission Fluid for a Car?

There are two bolts on the transmission housing of a car, one on the left and one on the right. The upper bolt is the oil filler hole; simply unscrew it when you need to add transmission fluid. The function of transmission fluid is to ensure smooth gear shifting, lubricate internal transmission components, and prevent damage to the transmission during gear changes. The steps for changing transmission fluid are as follows: 1. Start the engine to warm it up, allowing the transmission to reach operating temperature. Remove the drain bolt and collect the old fluid from the transmission. 2. Once the old fluid has completely drained, open the oil pan, replace the transmission filter, reinstall the oil pan and drain plug. 3. Add new transmission fluid, start the car, and shift through all gears. 4. Check if the automatic transmission fluid level is normal and make adjustments as needed.
11
0
Share

How to Replace the Cabin Air Filter in a 2016 Teana?

Steps to replace the cabin air filter in a 2016 Teana: 1. The cabin air filter is located inside the glove compartment on the passenger side. Open the glove compartment; 2. Remove the cabin air filter cover; 3. Pull out the old cabin air filter and install the new filter according to the arrow direction; 4. Reinstall the cover and glove compartment. The 2016 Teana is a mid-size 4-door 5-seater sedan with body dimensions of 4901mm in length, 1850mm in width, and 1450mm in height, and a wheelbase of 2825mm. This model features a MacPherson strut front suspension and a trapezoidal control arm multi-link rear suspension. In terms of power, it is equipped with a 2.0L naturally aspirated engine, paired with a CVT transmission.
2
1
Share

Where is the water temperature gauge displayed on the Volkswagen Jetta?

The water temperature gauge on the Volkswagen Jetta is displayed in the central electronic display of the instrument panel. When the car's water temperature is too high, the water temperature warning light on the instrument panel will illuminate to alert the driver. The water temperature indicator is used to show the temperature of the coolant in the engine, with some models using colors to indicate different conditions: blue indicates the water temperature is too low, red indicates it is too high, and no light means it is normal. Taking the 2020 Jetta VS5 as an example, its body dimensions are 4419mm in length, 1841mm in width, and 1616mm in height, with a wheelbase of 2630mm. This model is equipped with a 1.4L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 6-speed automatic transmission.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.